In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 60 km/h brakes with a constant deceleration of 5.5 m/s² until it stops. Find the braking distance s.
v₀ = 60 km/ha = −5.5 m/s²v = 0
s = m
2.KinematicsHard
Ball A is dropped from rest from a height of 60 m. At the same instant ball B is thrown straight up from the ground directly below at 21 m/s. Ignore air resistance and use g = 9.81 m/s². At what height y above the ground do they meet?
H = 60 mv0B = 21 m/sg = 9.81 m/s²
y = m
3.Newton’s lawsMedium
A 13 kg block slides down a frictionless slope at 40° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 13 kgθ = 40°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
An 8 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 8 kgm2 = 2.5 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 50° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 30 m/sθ = 50°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 10 m/s and 45° above the horizontal from the top of a 10 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.
v₀ = 10 m/sθ = 45°h = 10 mg = 9.81 m/s²
H = m
7.Circular motionMedium
In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 2.4 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.6. Use g = 9.81 m/s². Find the smallest rotation rate n in revolutions per minute.
r = 2.4 mμs = 0.6g = 9.81 m/s²
n = rpm
8.Circular motionHard
A 1.1 kg ball on a string 0.6 m long is swung in a vertical circle. At the lowest point it moves at 3.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 1.1 kgr = 0.6 mv = 3.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 11 m along the slope.
θ = 40°μ = 0.15d = 11 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
A 2 kg cart is released from rest at a height of 12 m on a smooth track that leads into a vertical circular loop of radius 4 m. Find the speed v of the cart at the top of the loop.
m = 2 kgh = 12 mR = 4 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 10 g bullet is fired horizontally into a 3 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 6 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 10 gM = 3 kgh = 6 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
A 12 g bullet is fired horizontally into a 2.5 kg block hanging from light strings 1.6 m long, and stays in it. The strings swing out to a largest angle of 15° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 12 gM = 2.5 kgL = 1.6 mθ = 15°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
A uniform slender rod of mass 11.5 kg and length 0.8 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find its angular acceleration α just after release.
m = 11.5 kgL = 0.8 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
A solid cylinder rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.
θ = 20°I = ½·m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
A 3 kW motor running at 960 rpm drives a pinion with 24 teeth and a module of 4 mm. Find the tangential force Ft on the pinion teeth.
P = 3 kWn = 960 rpmN1 = 24m = 4 mm
Ft = N
16.Gears & gear trainsHard
An open belt connects a 200 mm pulley and a 250 mm pulley whose centres are 800 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.
d1 = 200 mmd2 = 250 mmC = 800 mm
θ = °
17.Springs & pendulumsMedium
An astronaut on another planet finds that a simple pendulum 1.1 m long has a period of 1.97 s for small swings. Find the gravitational acceleration g on that planet.
L = 1.1 mT = 1.97 s
g = m/s²
18.Springs & pendulumsHard
A 3.4 kg mass on a spring with k = 120 N/m is pulled 8 cm from equilibrium and released. Find its maximum acceleration amax.
m = 3.4 kgk = 120 N/mA = 8 cm
amax = m/s²
19.Mechanical vibrationsMedium
A 5 kg mass is supported by a spring with a stiffness of 20 kN/m and a viscous damper with a damping coefficient of 60 N·s/m. Find the damping ratio ζ.
m = 5 kgk = 20 kN/mc = 60 N·s/m
ζ =
20.Mechanical vibrationsHard
A 100 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 5 kN/m and the lower one k₂ = 80 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 100 kgk1 = 5 kN/mk2 = 80 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: s = 25.25 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 60/3.6 = 16.67 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 16.67²/(2·5.5) = 25.25 m
Answer
s = 25.25 m
2.Kinematics
Answer: y = 19.96 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Meeting time
Up is positive, the ground is y = 0.
60 − ½g·t² = 21·t − ½g·t² → t = 60/21 = 2.857 s
Meeting height
y = 21·2.857 − ½·9.81·2.857² = 19.96 m
Answer
y = 19.96 m
3.Newton’s laws
Answer: a = 6.306 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 30·cos 50° = 19.28 m/s
vy = v0·sin θ = 30·sin 50° = 22.98 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·22.98/9.81 = 4.685 s
Horizontal distance
x = vx·t = 19.28·4.685 = 90.35 m
Answer
x = 90.35 m
6.Projectile motion
Answer: H = 12.55 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Vertical launch speed
vy = 10·sin 45° = 7.071 m/s
Rise above the cliff
Δh = vy²/(2g) = 7.071²/(2·9.81) = 2.548 m
Height above the ground
H = 10 + 2.548 = 12.55 m
Answer
H = 12.55 m
7.Circular motion
Answer: n = 24.92 rpm
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces on a rider
N = m·ω²·r
μ·N = m·g → μ·ω²·r = g
Angular speed
ω = √(g/(μ·r)) = √(9.81/(0.6·2.4)) = 2.61 rad/s
Rotation rate
n = ω·60/(2π) = 24.92 rpm
Answer
n = 24.92 rpm
8.Circular motion
Answer: T = 33.25 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 1.1·9.81 + 1.1·3.5²/0.6 = 10.79 + 22.46 = 33.25 N
Answer
T = 33.25 N
9.Work & energy
Answer: v = 10.67 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·11·(0.6428 − 0.15·0.766)) = 10.67 m/s
Answer
v = 10.67 m/s
10.Work & energy
Answer: v = 8.859 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(12 − 8) = 78.48 m²/s²
v = 8.859 m/s
Answer
v = 8.859 m/s
The cart just makes it round when h = 2.5R; then N = 0 at the top.
11.Momentum & collisions
Answer: v = 326.6 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Swing after impact
V = √(2·g·h) = √(2·9.81·0.06) = 1.085 m/s
Collision
m·v = (m + M)·V → v = (0.01 + 3)·1.085/0.01 = 326.6 m/s
Answer
v = 326.6 m/s
12.Momentum & collisions
Answer: v = 216.5 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 1.6·(1 − cos 15°) = 0.05452 m
Speed after impact
V = √(2·9.81·0.05452) = 1.034 m/s
Collision
v = (m + M)·V/m = 2.512·1.034/0.012 = 216.5 m/s
Answer
v = 216.5 m/s
13.Rigid-body rotation
Answer: α = 18.39 rad/s²
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Moments about the pin
At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Equations of motion
m·g·sin θ − f = m·a
f·r = I·α = 0.5·m·r²·(a/r) → f = 0.5·m·a
Acceleration
a = g·sin θ/(1 + c) = 9.81·sin 20°/1.5 = 2.237 m/s²
Friction needed
f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 0.5·tan 20°/1.5 = 0.1213
Answer
μs = 0.1213
15.Gears & gear trains
Answer: Ft = 621.7 N
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Torque on the pinion
ω = 2π·960/60 = 100.5 rad/s
T = P/ω = 3000/100.5 = 29.84 N·m
Pitch diameter
d = m·N = 4·24 = 96 mm
Tangential force
Ft = 2T/d = 2·29.84/0.096 = 621.7 N
Answer
Ft = 621.7 N
16.Gears & gear trains
Answer: θ = 176.4 °
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Belt angle
asin(0.03125) = 1.791°
Angle of wrap
θ = 180 − 2·1.791 = 176.4°
Answer
θ = 176.4°
17.Springs & pendulums
Answer: g = 11.19 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for g
g = 4π²·L/T² = 4π²·1.1/1.97² = 11.19 m/s²
Answer
g = 11.19 m/s²
18.Springs & pendulums
Answer: amax = 2.824 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(120/3.4) = 5.941 rad/s
Maximum acceleration
amax = A·ω² = 0.08·5.941² = 2.824 m/s²
Answer
amax = 2.824 m/s²
19.Mechanical vibrations
Answer: ζ = 0.09487
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(20000·5) = 632.5 N·s/m
Damping ratio
ζ = c/cc = 60/632.5 = 0.09487
Answer
ζ = 0.09487
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 1.092 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.