In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 100 km/h brakes with a constant deceleration of 3 m/s² until it stops. Find the braking distance s.
v₀ = 100 km/ha = −3 m/s²v = 0
s = m
2.KinematicsHard
A tram starts from rest and accelerates at 2 m/s² for 12 s, then runs at constant speed for 18 s, and finally brakes at 4.5 m/s² until it stops. Find the total distance s between the two stops.
a1 = 2 m/s²t1 = 12 st2 = 18 sa3 = −4.5 m/s²
s = m
3.Newton’s lawsMedium
A 17 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 17 kgθ = 30°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 1.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 1.5 kgm2 = 2 kgμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 24 m/sθ = 55°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 17 m/s and 60° above the horizontal from the top of a 10 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?
v₀ = 17 m/sθ = 60°h = 10 mg = 9.81 m/s²
α = °
7.Circular motionMedium
A car takes a flat curve of radius 85 m. The coefficient of static friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 85 mμs = 0.7g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 0.7 kg ball on a light string 1.3 m long is swung in a vertical circle. At the lowest point its speed is 10.5 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.
An 800 kg car drives up a 5° slope at a constant 90 km/h. Air resistance and rolling resistance together amount to 800 N. Find the power P the wheels must deliver, in kW.
A 15 kg block starts from rest at the bottom of a 20° slope and is pulled up the slope by a constant force of 80 N parallel to the slope. The coefficient of kinetic friction is 0.1. Find the speed v of the block after it has moved 9 m up the slope.
A 3 kg glider moving at 12 m/s makes a perfectly elastic head-on collision with a 3.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 3 kgm2 = 3.5 kgv1 = 12 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
A 1500 kg car runs into a parked 1700 kg car. The wrecks lock together and skid 7.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
An 8 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 19 kg and radius 0.15 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the angular acceleration α of the pulley.
m = 8 kgM = 19 kgR = 0.15 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
A uniform slender rod of mass 4 kg and length 1.2 m hangs at rest from a frictionless pivot at its top end. A 50 g bullet moving horizontally at 600 m/s hits the rod 0.88 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.
M = 4 kgL = 1.2 mm = 50 gv = 600 m/sd = 0.88 m
ω = rad/s
15.Gears & gear trainsMedium
A 1.1 kW motor running at 1500 rpm drives a pinion with 16 teeth, which meshes with a gear with 72 teeth. The gear pair has an efficiency of 98%. Find the torque T1 on the motor shaft.
P = 1.1 kWn1 = 1500 rpmN1 = 16N2 = 72η = 98%
T1 = N·m
16.Gears & gear trainsHard
In a compound gear train, gear A (16 teeth) on the input shaft turning at 960 rpm drives gear B (36 teeth). Gear C (72 teeth) is fixed to the same shaft as B and drives gear D (80 teeth) on the output shaft. Find the output speed nout.
nin = 960 rpmA = 16B = 36C = 72D = 80
nout = rpm
17.Springs & pendulumsMedium
A 3.5 kg mass on a spring with k = 460 N/m oscillates on a frictionless surface with an amplitude of 11 cm. Find its speed v when it is 7 cm from equilibrium.
m = 3.5 kgk = 460 N/mA = 11 cmx = 7 cm
v = m/s
18.Springs & pendulumsHard
A 1.6 kg mass on a spring with k = 160 N/m is pulled 15 cm from equilibrium and released. Find its maximum acceleration amax.
m = 1.6 kgk = 160 N/mA = 15 cm
amax = m/s²
19.Mechanical vibrationsMedium
A 100 kg mass on a spring with a stiffness of 25 kN/m has a viscous damper giving a damping ratio of 0.5. Find the damped natural frequency fd of its free vibration in Hz.
m = 100 kgk = 25 kN/mζ = 0.5
fd = Hz
20.Mechanical vibrationsHard
A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 12 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 25 kgk1 = 30 kN/mk2 = 12 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: s = 128.6 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 100/3.6 = 27.78 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 27.78²/(2·3) = 128.6 m
Answer
s = 128.6 m
2.Kinematics
Answer: s = 640 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Top speed
v = a1·t1 = 2·12 = 24 m/s
Distance of each phase
s1 = ½·2·12² = 144 m
s2 = 24·18 = 432 m
s3 = 24²/(2·4.5) = 64 m
Total distance
s = 144 + 432 + 64 = 640 m
Answer
s = 640 m
3.Newton’s laws
Answer: a = 2.781 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 24·cos 55° = 13.77 m/s
vy = v0·sin θ = 24·sin 55° = 19.66 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·19.66/9.81 = 4.008 s
Answer
t = 4.008 s
6.Projectile motion
Answer: α = 67.3 °
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 17·cos 60° = 8.5 m/s
vy0 = 17·sin 60° = 14.72 m/s
Vertical speed at impact
Energy or v² = v₀² + 2as in the vertical direction.
vy = √(14.72² + 2·9.81·10) = 20.32 m/s
Impact angle
tan α = vy/vx = 20.32/8.5 → α = 67.3°
Answer
α = 67.3°
7.Circular motion
Answer: vmax = 24.16 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.7·9.81·85) = 24.16 m/s
Answer
vmax = 24.16 m/s (86.98 km/h)
8.Circular motion
Answer: Ttop = 25.03 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed at the top
Kinetic energy is traded for potential energy over a height 2r.
vtop² = 10.5² − 4·9.81·1.3 = 59.24 m²/s²
Forces at the top
Tension and gravity both point down, towards the centre.
T + m·g = m·vtop²/r
T = 0.7·59.24/1.3 − 0.7·9.81 = 25.03 N
Answer
Ttop = 25.03 N
9.Work & energy
Answer: P = 37.1 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 800·9.81 = 7848 N
mg·sin θ = 7848·sin 5° = 684 N
F = 684 + 800 = 1484 N
Power
v = 90/3.6 = 25 m/s
P = F·v = 1484·25 = 37100 W = 37.1 kW
Answer
P = 37.1 kW
10.Work & energy
Answer: v = 4.36 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 15·9.81 = 147.2 N
mg·sin θ = 50.33 N
μ·mg·cos θ = 13.83 N
Work–energy
½mv² = (80 − 64.16)·9 = 142.6 J
v = √(2·142.6/15) = 4.36 m/s
Answer
v = 4.36 m/s
11.Momentum & collisions
Answer: v′2 = 11.08 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (3 − 3.5)/(3 + 3.5)·12 = −0.9231 m/s
v′2 = 2·3/(3 + 3.5)·12 = 11.08 m/s
Answer
v′2 = 11.08 m/s
12.Momentum & collisions
Answer: v1 = 23.15 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Block and pulley
block: m·g − T = m·a
pulley: T·R = I·α = ½·M·R²·(a/R) → T = ½·M·a
Acceleration
a = m·g/(m + M/2) = 8·9.81/(8 + 9.5) = 4.485 m/s²
Angular acceleration
α = a/R = 4.485/0.15 = 29.9 rad/s²
Answer
α = 29.9 rad/s²
14.Rigid-body rotation
Answer: ω = 13.48 rad/s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Motor torque
ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 1100/157.1 = 7.003 N·m
Answer
T1 = 7.003 N·m
16.Gears & gear trains
Answer: nout = 384 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 960·16/36 = 426.7 rpm = nC
Second stage
nout = 426.7·72/80 = 384 rpm
Answer
nout = 384 rpm
total ratio = 2.5 : 1
17.Springs & pendulums
Answer: v = 0.9728 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(460/3.5) = 11.46 rad/s
Speed at x
v = ω·√(A² − x²) = 11.46·√(0.11² − 0.07²) = 0.9728 m/s
Answer
v = 0.9728 m/s
18.Springs & pendulums
Answer: amax = 15 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(160/1.6) = 10 rad/s
Maximum acceleration
amax = A·ω² = 0.15·10² = 15 m/s²
Answer
amax = 15 m/s²
19.Mechanical vibrations
Answer: fd = 2.179 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(25000/100) = 15.81 rad/s
fn = 15.81/(2π) = 2.516 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 2.516·√(1 − 0.5²) = 2.179 Hz
Answer
fd = 2.179 Hz
20.Mechanical vibrations
Answer: fn = 2.947 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.