In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A driver moving at 36 km/h sees an obstacle. Her reaction time is 1.3 s, after which the car brakes with a constant deceleration of 5.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 36 km/htr = 1.3 sa = −5.5 m/s²
d = m
2.KinematicsHard
A ball is thrown straight up at 5 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 5 m/sh₀ = 5 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
An 18 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 18 kgθ = 40°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A block is given a push so that it starts sliding up a ramp at 20° with a speed of 11.5 m/s. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?
v₀ = 11.5 m/sθ = 20°μ = 0.1g = 9.81 m/s²
d = m
5.Projectile motionMedium
A ball is launched from level ground at 28 m/s and must land 55 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.
v₀ = 28 m/sR = 55 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
A ball is launched at 35° above horizontal from the top of a 55 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 33 m/sθ = 35°h = 55 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A car takes a flat curve of radius 25 m. The coefficient of static friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 25 mμs = 0.8g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A 1.4 kg ball on a string 1.3 m long is swung in a vertical circle. At the lowest point it moves at 5.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.
m = 1.4 kgr = 1.3 mv = 5.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
An 800 kg car drives up a 6° slope at a constant 90 km/h. Air resistance and rolling resistance together amount to 750 N. Find the power P the wheels must deliver, in kW.
A 5 kg cart is released from rest at a height of 3.2 m on a smooth track that leads into a vertical circular loop of radius 1 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 5 kgh = 3.2 mR = 1 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
A 700 kg car moving at 10 m/s runs into a stationary 1300 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?
m1 = 700 kgv1 = 10 m/sm2 = 1300 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
A 0.35 kg ball hits a wall at 10 m/s and bounces straight back at 6 m/s. The contact lasts 50 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.35 kgvin = 10 m/svout = 6 m/sΔt = 50 ms
J = N·s
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 24.5 kg·m² spins at 2200 rpm. A brake applies a constant friction torque of 200 N·m. How many revolutions N does the flywheel make before it stops?
I = 24.5 kg·m²n = 2200 rpmTb = 200 N·m
N = rev
14.Rigid-body rotationHard
A solid cylinder rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Find the smallest coefficient of static friction μs that prevents it from slipping.
θ = 40°I = ½·m·r²g = 9.81 m/s²
μs =
15.Gears & gear trainsMedium
A 1.5 kW motor running at 2900 rpm drives a pinion with 16 teeth and a module of 3 mm. Find the tangential force Ft on the pinion teeth.
P = 1.5 kWn = 2900 rpmN1 = 16m = 3 mm
Ft = N
16.Gears & gear trainsHard
In a compound gear train, gear A (12 teeth) on the input shaft turning at 960 rpm drives gear B (48 teeth). Gear C (18 teeth) is fixed to the same shaft as B and drives gear D (72 teeth) on the output shaft. Find the output speed nout.
nin = 960 rpmA = 12B = 48C = 18D = 72
nout = rpm
17.Springs & pendulumsMedium
A simple pendulum has a length of 2.8 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 2.8 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A 3.1 kg mass on a spring with k = 60 N/m is pulled 5 cm from equilibrium and released. Find its maximum speed vmax.
m = 3.1 kgk = 60 N/mA = 5 cm
vmax = m/s
19.Mechanical vibrationsMedium
A 200 kg mass is supported by a spring with a stiffness of 80 kN/m and a viscous damper with a damping coefficient of 2000 N·s/m. Find the damping ratio ζ.
m = 200 kgk = 80 kN/mc = 2000 N·s/m
ζ =
20.Mechanical vibrationsHard
A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 60 kN/m and k₂ = 60 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 50 kgk1 = 60 kN/mk2 = 60 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: d = 22.09 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 36/3.6 = 10 m/s
Reaction distance
d1 = v₀·tr = 10·1.3 = 13 m
Braking distance
d2 = v₀²/(2a) = 10²/(2·5.5) = 9.091 m
Total
d = 13 + 9.091 = 22.09 m
Answer
d = 22.09 m
2.Kinematics
Answer: hmax = 6.274 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 5²/(2·9.81) = 1.274 m
Height above the ground
hmax = 5 + 1.274 = 6.274 m
Answer
hmax = 6.274 m
3.Newton’s laws
Answer: a = 4.803 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
Both forces point down the slope; the mass cancels.
a = 9.81·(sin 20° + 0.1·cos 20°) = 4.277 m/s²
Distance
d = v₀²/(2a) = 11.5²/(2·4.277) = 15.46 m
Answer
d = 15.46 m
5.Projectile motion
Answer: θ = 21.74 °
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Range formula
R = v₀²·sin 2θ/g → sin 2θ = 9.81·55/28² = 0.6882
Angle
2θ = 43.49° → θ = 21.74°
Answer
θ = 21.74°
The other solution is 90° − θ = 68.26°.
6.Projectile motion
Answer: x = 156.6 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 33·cos 35° = 27.03 m/s
vy = v0·sin θ = 33·sin 35° = 18.93 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 55 + 18.93·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (18.93 + √(358.3 + 1079))/9.81 = 5.794 s
Horizontal distance
x = vx·t = 27.03·5.794 = 156.6 m
Answer
x = 156.6 m
7.Circular motion
Answer: vmax = 14.01 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.8·9.81·25) = 14.01 m/s
Answer
vmax = 14.01 m/s (50.43 km/h)
8.Circular motion
Answer: T = 46.31 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces at the lowest point
Towards the centre (up) is positive.
T − m·g = m·v²/r
T = 1.4·9.81 + 1.4·5.5²/1.3 = 13.73 + 32.58 = 46.31 N
Answer
T = 46.31 N
9.Work & energy
Answer: P = 39.26 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 800·9.81 = 7848 N
mg·sin θ = 7848·sin 6° = 820.3 N
F = 820.3 + 750 = 1570 N
Power
v = 90/3.6 = 25 m/s
P = F·v = 1570·25 = 39258 W = 39.26 kW
Answer
P = 39.26 kW
10.Work & energy
Answer: N = 68.67 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(3.2 − 2) = 23.54 m²/s²
Forces at the top
m·g = 5·9.81 = 49.05 N
N = mv²/R − mg = 5·23.54/1 − 49.05 = 68.67 N
Answer
N = 68.67 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
11.Momentum & collisions
Answer: ΔK/K = 65 %
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 700·10/2000 = 3.5 m/s
Kinetic energy before and after
Kbefore = ½·700·10² = 35000 J
Kafter = ½·2000·3.5² = 12250 J
Fraction lost
ΔK/K = 22750/35000 = 65 %
Answer
ΔK/K = 65 %
The lost energy goes into deformation, heat and sound.
12.Momentum & collisions
Answer: J = 5.6 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.35·(6 + 10) = 5.6 N·s
Answer
J = 5.6 N·s
13.Rigid-body rotation
Answer: N = 517.4 rev
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·2200/60 = 230.4 rad/s
Work of the brake equals the kinetic energy
½·I·ω² = ½·24.5·230.4² = 650188 J
θ = 650188/200 = 3251 rad
Revolutions
N = θ/2π = 517.4 rev
Answer
N = 517.4 rev
14.Rigid-body rotation
Answer: μs = 0.2797
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Equations of motion
m·g·sin θ − f = m·a
f·r = I·α = 0.5·m·r²·(a/r) → f = 0.5·m·a
Acceleration
a = g·sin θ/(1 + c) = 9.81·sin 40°/1.5 = 4.204 m/s²
Friction needed
f = c·m·a ≤ μ·m·g·cos θ → μ ≥ c·tan θ/(1 + c)
μs = 0.5·tan 40°/1.5 = 0.2797
Answer
μs = 0.2797
15.Gears & gear trains
Answer: Ft = 205.8 N
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Torque on the pinion
ω = 2π·2900/60 = 303.7 rad/s
T = P/ω = 1500/303.7 = 4.939 N·m
Pitch diameter
d = m·N = 3·16 = 48 mm
Tangential force
Ft = 2T/d = 2·4.939/0.048 = 205.8 N
Answer
Ft = 205.8 N
16.Gears & gear trains
Answer: nout = 60 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 960·12/48 = 240 rpm = nC
Second stage
nout = 240·18/72 = 60 rpm
Answer
nout = 60 rpm
total ratio = 16 : 1
17.Springs & pendulums
Answer: T = 3.357 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(2.8/9.81) = 3.357 s
Answer
T = 3.357 s
18.Springs & pendulums
Answer: vmax = 0.22 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(60/3.1) = 4.399 rad/s
Maximum speed
vmax = A·ω = 0.05·4.399 = 0.22 m/s
Answer
vmax = 0.22 m/s
19.Mechanical vibrations
Answer: ζ = 0.25
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(80000·200) = 8000 N·s/m
Damping ratio
ζ = c/cc = 2000/8000 = 0.25
Answer
ζ = 0.25
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 7.797 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.