Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = 3 m/s²s = 2000 m

A plane starts from rest and accelerates uniformly at 3 m/s² along a runway. Find its speed v after 2000 m.

v₀ = 0a = 3 m/s²s = 2000 m
v = m/s
2.KinematicsHard
AB: 24 m/s50 m

Ball A is dropped from rest from a height of 50 m. At the same instant ball B is thrown straight up from the ground directly below at 24 m/s. Ignore air resistance and use g = 9.81 m/s². At what height y above the ground do they meet?

H = 50 mv0B = 24 m/sg = 9.81 m/s²
y = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 14 kg

A 14 kg block slides down a frictionless slope at 45° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 14 kgθ = 45°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 1.5 kg6.5 kgθ = 20°

A 1.5 kg block on a ramp at 20° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 6.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 1.5 kgm2 = 6.5 kgθ = 20°μ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 38 m/s25°range

A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 38 m/sθ = 25°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 10 mv0​ = 24 m/s65°H = ?

A ball is launched at 24 m/s and 65° above the horizontal from the top of a 10 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 24 m/sθ = 65°h = 10 mg = 9.81 m/s²
H = m
7.Circular motionMedium
L = 0.3 m40°

A small ball on a string of length 0.3 m moves in a horizontal circle so that the string makes a constant angle of 40° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.

L = 0.3 mθ = 40°g = 9.81 m/s²
T = s
8.Circular motionHard
r = 0.5 mv = 6 m/s

A 0.4 kg ball on a string 0.5 m long is swung in a vertical circle. At the lowest point it moves at 6 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 0.4 kgr = 0.5 mv = 6 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
35°d = 16 mμ = 0.35

A block slides from rest down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.35. Find its speed v after it has slid 16 m along the slope.

θ = 35°μ = 0.35d = 16 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
k = 1000 N/m35°μ = 0.20.5 kg

A spring of stiffness 1000 N/m at the bottom of a 35° slope is compressed by 12 cm against a 0.5 kg block and released. The coefficient of kinetic friction between block and slope is 0.2. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 0.5 kgk = 1000 N/mx = 12 cmθ = 35°μ = 0.2g = 9.81 m/s²
d = m
11.Momentum & collisionsMedium
9 kg35 m/s11 kgv′2​ = ?

A 20 kg projectile moving horizontally at 5 m/s explodes into two fragments that move along the same line. The 9 kg fragment continues forwards at 35 m/s. Find the velocity v′2 of the 11 kg fragment (positive in the original direction).

M = 20 kgu = 5 m/sm1 = 9 kgv′1 = 35 m/sm2 = 11 kg
v′2 = m/s
12.Momentum & collisionsHard
1500 kgv1​ = ?1600 kg

A 1500 kg car runs into a parked 1600 kg car. The wrecks lock together and skid 21.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1500 kgm2 = 1600 kgd = 21.5 mμ = 0.5g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
L = 2.2 mm = 20 kgα

A uniform slender rod of mass 20 kg and length 2.2 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 20 kgL = 2.2 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
0.9 m0.15 mn1​ = 50 rpm

A person stands on a frictionless turntable and holds a 2 kg dumbbell in each hand, 0.9 m from the axis. The person and turntable alone have a moment of inertia of 2.5 kg·m² about the axis. They turn at 50 rpm, then pull the dumbbells in to 0.15 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 2.5 kg·m²m = 2 × 2 kgr1 = 0.9 mr2 = 0.15 mn1 = 50 rpm
n2 = rpm
15.Gears & gear trainsMedium
Tw​ = ?z = 4, 1440 rpm

A 0.75 kW motor at 1440 rpm drives a worm with 4 start(s). The worm wheel has 40 teeth and the drive has an efficiency of 75%. Find the output torque Tw on the wheel shaft.

z = 4Nw = 40n = 1440 rpmP = 0.75 kWη = 75%
Tw = N·m
16.Gears & gear trainsHard
d1​ = 125 mmd2​ = 500 mm2880 rpmC = 1000 mmT1​ = 600 NT2​P = ?

An open belt connects a 125 mm driving pulley at 2880 rpm to a 500 mm pulley; the centres are 1000 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 600 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 125 mmn1 = 2880 rpmd2 = 500 mmC = 1000 mmμ = 0.35T1 = 600 N
P = kW
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.7 s? Use g = 9.81 m/s². Find L.

T = 2.7 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
0.4 kgk = 470 N/mA = 18 cm

A 0.4 kg mass on a spring with k = 470 N/m is pulled 18 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 0.4 kgk = 470 N/mA = 18 cm
E = J
19.Mechanical vibrationsMedium
tx12 mm1 cycle9.3 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 12 mm is followed one cycle later by a peak of 9.3 mm. Find the damping ratio ζ.

x0 = 12 mmx1 = 9.3 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 40k2​ = 80k3​ = 5m = 100 kg

A 100 kg mass hangs from spring k₃ = 5 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 80 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 40 kN/mk2 = 80 kN/mk3 = 5 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: v = 109.5 m/s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Speed after the distance

v = √(2·a·s) = √(2·3·2000) = 109.5 m/s

Answer

v = 109.5 m/s
(394.4 km/h)
2.Kinematics

Answer: y = 28.71 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Meeting time

Up is positive, the ground is y = 0.

50 − ½g·t² = 24·t − ½g·t² → t = 50/24 = 2.083 s

Meeting height

y = 24·2.083 − ½·9.81·2.083² = 28.71 m

Answer

y = 28.71 m
3.Newton’s laws

Answer: a = 6.937 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0·cos 45°) = 9.81·(0.7071 − 0) = 6.937 m/s²

Answer

a = 6.937 m/s²
4.Newton’s laws

Answer: a = 7.169 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 63.77 N
m₁·g·sin θ = 5.033 N
μ·m₁·g·cos θ = 1.383 N

Acceleration of the system

a = (63.77 − 5.033 − 1.383)/8 = 7.169 m/s²

Answer

a = 7.169 m/s²
5.Projectile motion

Answer: t = 3.274 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 38·cos 25° = 34.44 m/s
vy = v0·sin θ = 38·sin 25° = 16.06 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·16.06/9.81 = 3.274 s

Answer

t = 3.274 s
6.Projectile motion

Answer: H = 34.11 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 24·sin 65° = 21.75 m/s

Rise above the cliff

Δh = vy²/(2g) = 21.75²/(2·9.81) = 24.11 m

Height above the ground

H = 10 + 24.11 = 34.11 m

Answer

H = 34.11 m
7.Circular motion

Answer: T = 0.9617 s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 0.3·sin 40° = 0.1928 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.1928·9.81·tan 40°) = 1.26 m/s

Period

T = 2π·r/v = 2π·0.1928/1.26 = 0.9617 s

Answer

T = 0.9617 s
8.Circular motion

Answer: T = 32.72 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 0.4·9.81 + 0.4·6²/0.5 = 3.924 + 28.8 = 32.72 N

Answer

T = 32.72 N
9.Work & energy

Answer: v = 9.49 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·16·(0.5736 − 0.35·0.8192)) = 9.49 m/s

Answer

v = 9.49 m/s
10.Work & energy

Answer: d = 1.991 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 12 cm = 0.12 m
½kx² = ½·1000·0.12² = 7.2 J

Energy balance along the slope

m·g = 0.5·9.81 = 4.905 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 7.2/(4.905·(0.5736 + 0.2·0.8192)) = 1.991 m

Answer

d = 1.991 m
11.Momentum & collisions

Answer: v′2 = −19.55 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 20·5 = 100 kg·m/s

Momentum after

100 = 9·35 + 11·v′2
v′2 = (100 − 315)/11 = −19.55 m/s

Answer

v′2 = −19.55 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v1 = 30.01 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.5·9.81·21.5) = 14.52 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 3100·14.52/1500 = 30.01 m/s

Answer

v1 = 30.01 m/s
(108.1 km/h)
13.Rigid-body rotation

Answer: R = 49.05 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.2) = 6.689 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 20·(9.81 − 7.357) = 49.05 N

Answer

R = 49.05 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: n2 = 110.8 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 2.5 + 2·2·0.9² = 5.74 kg·m²
I2 = 2.5 + 2·2·0.15² = 2.59 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 50·5.74/2.59 = 110.8 rpm

Answer

n2 = 110.8 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: Tw = 37.3 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 1440·4/40 = 144 rpm

Output torque

ωw = 2π·144/60 = 15.08 rad/s
Tw = η·P/ωw = 0.75·750/15.08 = 37.3 N·m

Answer

Tw = 37.3 N·m
16.Gears & gear trains

Answer: P = 7.012 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.764 rad

Slack-side tension

eμθ = e0.9675 = 2.631, T₂ = 600/2.631 = 228 N

Power

P = (600 − 228)·18.85 = 7.012 kW

Answer

P = 7.012 kW
17.Springs & pendulums

Answer: L = 1.811 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.7/2π)² = 1.811 m

Answer

L = 1.811 m
18.Springs & pendulums

Answer: E = 7.614 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(470/0.4) = 34.28 rad/s

Energy

E = ½·k·A² = ½·470·0.18² = 7.614 J

Answer

E = 7.614 J
19.Mechanical vibrations

Answer: ζ = 0.04053

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(12/9.3) = 0.2549

Damping ratio

ζ = δ/√(4π² + δ²) = 0.2549/√(39.48 + 0.06497) = 0.04053

Answer

ζ = 0.04053
20.Mechanical vibrations

Answer: fn = 1.103 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 40 + 80 = 120 kN/m
keq = 120·5/(120 + 5) = 4.8 kN/m

Natural frequency

ωn = √(4800/100) = 6.928 rad/s
fn = 6.928/(2π) = 1.103 Hz

Answer

fn = 1.103 Hz

ExamProblems · examproblems.com/courses/dynamics