Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?33.33

A car driving at 120 km/h brakes with a constant deceleration of 6.5 m/s² until it stops. How long does braking take? Find t.

v₀ = 120 km/ha = −6.5 m/s²v = 0
t = s
2.KinematicsHard
v₀ = 17 m/s20 m

A ball is thrown straight up at 17 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 17 m/sh₀ = 20 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 15 kg

A 15 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 15 kgθ = 45°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
4 kg5 kgTF = 135 Nμ = 0.15

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 135 N pulls the front 5 kg block; the 4 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 4 kgm2 = 5 kgF = 135 Nμ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = ?30°R = 35 m

A ball is launched from level ground at 30° above the horizontal and lands 35 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 30°R = 35 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 15 mv0​ = 19 m/s40°H = ?

A ball is launched at 19 m/s and 40° above the horizontal from the top of a 15 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 19 m/sθ = 40°h = 15 mg = 9.81 m/s²
H = m
7.Circular motionMedium
θ = 20°to centrev = ?

A curve of radius 320 m is banked at 20°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².

r = 320 mθ = 20°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 1.1 mv = 5.5 m/s

A 1.5 kg ball on a string 1.1 m long is swung in a vertical circle. At the lowest point it moves at 5.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.5 kgr = 1.1 mv = 5.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
90 km/h5°2000 kg

A 2000 kg car drives up a 5° slope at a constant 90 km/h. Air resistance and rolling resistance together amount to 500 N. Find the power P the wheels must deliver, in kW.

m = 2000 kgθ = 5°Fr = 500 Nv = 90 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
h = 14 mR = 4 mN = ?

A 1 kg cart is released from rest at a height of 14 m on a smooth track that leads into a vertical circular loop of radius 4 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 1 kgh = 14 mR = 4 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
1300 kg13 m/s2000 kg

A 1300 kg car moving at 13 m/s runs into a stationary 2000 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 1300 kgv1 = 13 m/sm2 = 2000 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
30 m/s20 m/s

A 0.2 kg ball hits a wall at 30 m/s and bounces straight back at 20 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.

m = 0.2 kgvin = 30 m/svout = 20 m/sΔt = 40 ms
Favg = N
13.Rigid-body rotationMedium
v = ?L = 1.3 mm = 3.5 kg

A uniform slender rod of mass 3.5 kg and length 1.3 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 3.5 kgL = 1.3 mg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
260 m/s10 g0.89 mL = 1.6 m2.5 kg

A uniform slender rod of mass 2.5 kg and length 1.6 m hangs at rest from a frictionless pivot at its top end. A 10 g bullet moving horizontally at 260 m/s hits the rod 0.89 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 2.5 kgL = 1.6 mm = 10 gv = 260 m/sd = 0.89 m
ω = rad/s
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 54 mm apart. They must be connected by a pair of spur gears with a module of 1.5 mm and a speed reduction of 2 : 1. How many teeth N2 must the gear have?

a = 54 mmm = 1.5 mmi = 2
N2 =
16.Gears & gear trainsHard
d1​ = 150 mmd2​ = 250 mm720 rpmC = 1000 mmθ = ?

An open belt connects a 150 mm pulley and a 250 mm pulley whose centres are 1000 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 150 mmd2 = 250 mmC = 1000 mm
θ = °
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.3 s? Use g = 9.81 m/s². Find L.

T = 2.3 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
1.1 kgk = 180 N/mA = 10 cm

A 1.1 kg mass on a spring with k = 180 N/m is pulled 10 cm from equilibrium and released. Find its maximum acceleration amax.

m = 1.1 kgk = 180 N/mA = 10 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 4 kN/mc = 320 N·s/mm = 40 kg

A 40 kg mass is supported by a spring with a stiffness of 4 kN/m and a viscous damper with a damping coefficient of 320 N·s/m. Find the damping ratio ζ.

m = 40 kgk = 4 kN/mc = 320 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 20k2​ = 60m = 25 kg

A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 20 kN/m and k₂ = 60 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 25 kgk1 = 20 kN/mk2 = 60 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: t = 5.128 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 120/3.6 = 33.33 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 33.33/6.5 = 5.128 s

Answer

t = 5.128 s
2.Kinematics

Answer: hmax = 34.73 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 17²/(2·9.81) = 14.73 m

Height above the ground

hmax = 20 + 14.73 = 34.73 m

Answer

hmax = 34.73 m
3.Newton’s laws

Answer: a = 4.856 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.3·cos 45°) = 9.81·(0.7071 − 0.2121) = 4.856 m/s²

Answer

a = 4.856 m/s²
4.Newton’s laws

Answer: T = 60 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (135 − 13.24)/9 = 13.53 m/s²

Rear block alone

T = m1·(a + μ·g) = 4·(13.53 + 1.472) = 60 N

Answer

T = 60 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: v0 = 19.91 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·35/sin 60°) = 19.91 m/s

Answer

v0 = 19.91 m/s
6.Projectile motion

Answer: H = 22.6 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 19·sin 40° = 12.21 m/s

Rise above the cliff

Δh = vy²/(2g) = 12.21²/(2·9.81) = 7.602 m

Height above the ground

H = 15 + 7.602 = 22.6 m

Answer

H = 22.6 m
7.Circular motion

Answer: v = 33.8 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balance

N·cos θ = m·g, N·sin θ = m·v²/r → tan θ = v²/(r·g)

Speed

v = √(r·g·tan θ) = √(320·9.81·tan 20°) = 33.8 m/s

Answer

v = 33.8 m/s
(121.7 km/h)
8.Circular motion

Answer: T = 55.96 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.5·9.81 + 1.5·5.5²/1.1 = 14.71 + 41.25 = 55.96 N

Answer

T = 55.96 N
9.Work & energy

Answer: P = 55.25 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 2000·9.81 = 19620 N
mg·sin θ = 19620·sin 5° = 1710 N
F = 1710 + 500 = 2210 N

Power

v = 90/3.6 = 25 m/s
P = F·v = 2210·25 = 55250 W = 55.25 kW

Answer

P = 55.25 kW
10.Work & energy

Answer: N = 19.62 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(14 − 8) = 117.7 m²/s²

Forces at the top

m·g = 1·9.81 = 9.81 N
N = mv²/R − mg = 1·117.7/4 − 9.81 = 19.62 N

Answer

N = 19.62 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: ΔK = 66576 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1300·13/3300 = 5.121 m/s

Kinetic energy before and after

Kbefore = ½·1300·13² = 109850 J
Kafter = ½·3300·5.121² = 43274 J

Energy lost

ΔK = 109850 − 43274 = 66576 J

Answer

ΔK = 66576 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: Favg = 250 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.2·(20 + 30) = 10 N·s

Average force

Favg = J/Δt = 10/0.04 = 250 N

Answer

Favg = 250 N
13.Rigid-body rotation

Answer: v = 6.185 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 3.5·9.81·0.65 = 22.32 J

Moment of inertia about the pin

IO = m·L²/3 = 3.5·1.3²/3 = 1.972 kg·m²

Energy balance

½·IO·ω² = 22.32 → ω = √(2·22.32/1.972) = 4.758 rad/s
v = ω·L = 4.758·1.3 = 6.185 m/s

Answer

v = 6.185 m/s
14.Rigid-body rotation

Answer: ω = 1.081 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 2.5·1.6²/3 + 0.01·0.89² = 2.141 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.01·260·0.89/2.141 = 1.081 rad/s

Answer

ω = 1.081 rad/s
15.Gears & gear trains

Answer: N2 = 48

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·54/1.5 = 72

Split by the ratio

N1 = 72/(1 + 2) = 24
N2 = 2·24 = 48

Answer

N2 = 48
16.Gears & gear trains

Answer: θ = 174.3 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.05) = 2.866°

Angle of wrap

θ = 180 − 2·2.866 = 174.3°

Answer

θ = 174.3°
17.Springs & pendulums

Answer: L = 1.315 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.3/2π)² = 1.315 m

Answer

L = 1.315 m
18.Springs & pendulums

Answer: amax = 16.36 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(180/1.1) = 12.79 rad/s

Maximum acceleration

amax = A·ω² = 0.1·12.79² = 16.36 m/s²

Answer

amax = 16.36 m/s²
19.Mechanical vibrations

Answer: ζ = 0.4

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(4000·40) = 800 N·s/m

Damping ratio

ζ = c/cc = 320/800 = 0.4

Answer

ζ = 0.4

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: keq = 80 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 20 + 60 = 80 kN/m

Answer

keq = 80 kN/m

ExamProblems · examproblems.com/courses/dynamics