Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 2 m/s²car26 m/s

A car speeding at a constant 26 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 2 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 26 m/sapolice = 2 m/s²v0,police = 0
d = m
2.KinematicsHard
a = 24 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 24 m/s² for 1 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 24 m/s²t1 = 1 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
8 kg3 kg

Masses of 8 kg and 3 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 8 kgm2 = 3 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
9 kg3 kgTF = 50 Nμ = 0.3

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 50 N pulls the front 3 kg block; the 9 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.

m1 = 9 kgm2 = 3 kgF = 50 Nμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 36 m/s30°rangeH = ?

A ball is launched at 30° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 36 m/sθ = 30°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 5 mv0​ = 33 m/s50°x = ?

A ball is launched at 50° above horizontal from the top of a 5 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 33 m/sθ = 50°h = 5 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 80 mvmax​ = ?

A car takes a flat curve of radius 80 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 80 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.5 mv = 4.5 m/s

A 1 kg ball on a string 0.5 m long is swung in a vertical circle. At the lowest point it moves at 4.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1 kgr = 0.5 mv = 4.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
15°d = 2 mμ = 0.15

A block slides from rest down a slope at 15° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 2 m along the slope.

θ = 15°μ = 0.15d = 2 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
k = 5000 N/m35°μ = 0.33 kg

A spring of stiffness 5000 N/m at the bottom of a 35° slope is compressed by 8 cm against a 3 kg block and released. The coefficient of kinetic friction between block and slope is 0.3. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 3 kgk = 5000 N/mx = 8 cmθ = 35°μ = 0.3g = 9.81 m/s²
d = m
11.Momentum & collisionsMedium
600 kg18 m/s700 kg

A 600 kg car moving at 18 m/s runs into a stationary 700 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 600 kgv1 = 18 m/sm2 = 700 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
4.5 kgv = ?12 g10°L = 1.1 m

A 12 g bullet is fired horizontally into a 4.5 kg block hanging from light strings 1.1 m long, and stays in it. The strings swing out to a largest angle of 10° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 12 gM = 4.5 kgL = 1.1 mθ = 10°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
L = 1.5 mm = 1 kgα

A uniform slender rod of mass 1 kg and length 1.5 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 1 kgL = 1.5 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
9.5 m/sω

A thin hoop of mass 18 kg rolls without slipping at 9.5 m/s. What percentage p of its total kinetic energy is rotational?

m = 18 kgv = 9.5 m/sI = m·r²
p = %
15.Gears & gear trainsMedium
d1​ = 160 mmd2​ = 300 mm1500 rpmn2​ = ?

A 160 mm pulley at 1500 rpm drives a 300 mm pulley by a belt with 2 % slip. Find the speed n2 of the driven pulley.

n1 = 1500 rpmd1 = 160 mmd2 = 300 mms = 2 %
n2 = rpm
16.Gears & gear trainsHard
A = 24B = 72C = 24D = ?

In a compound gear train, gear A (24 teeth) on the input shaft turns at 2880 rpm and drives gear B (72 teeth). Gear C (24 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 460.8 rpm. How many teeth ND must gear D have?

nin = 2880 rpmA = 24B = 72C = 24nout = 460.8 rpm
ND =
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 1.1 s? Use g = 9.81 m/s². Find L.

T = 1.1 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
2.7 kgk = 190 N/mA = 14 cm

A 2.7 kg mass on a spring with k = 190 N/m is pulled 14 cm from equilibrium and released. Find its maximum acceleration amax.

m = 2.7 kgk = 190 N/mA = 14 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 50 kN/mc = 450 N·s/mm = 25 kg

A 25 kg mass is supported by a spring with a stiffness of 50 kN/m and a viscous damper with a damping coefficient of 450 N·s/m. Find the damping ratio ζ.

m = 25 kgk = 50 kN/mc = 450 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 50k2​ = 100m = 50 kg

A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 50 kN/m and k₂ = 100 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 50 kgk1 = 50 kN/mk2 = 100 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: d = 676 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·26/2 = 26 s

Distance

d = v·t = 26·26 = 676 m

Answer

d = 676 m

At that moment the police car moves at 2v = 52 m/s.

2.Kinematics

Answer: hmax = 41.36 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 24·1 = 24 m/s
h₁ = ½·24·1² = 12 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 24²/(2·9.81) = 29.36 m
hmax = 12 + 29.36 = 41.36 m

Answer

hmax = 41.36 m
3.Newton’s laws

Answer: T = 42.81 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration

The net driving force is the difference of the weights; it moves the total mass.

a = (8 − 3)·9.81/(8 + 3) = 4.459 m/s²

Tension from the lighter mass

T − m2·g = m2·a → T = 3·(9.81 + 4.459) = 42.81 N

Answer

T = 42.81 N
4.Newton’s laws

Answer: a = 1.224 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (50 − 35.32)/12 = 1.224 m/s²

Answer

a = 1.224 m/s²
5.Projectile motion

Answer: H = 16.51 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 36·cos 30° = 31.18 m/s
vy = v0·sin θ = 36·sin 30° = 18 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 18²/(2·9.81) = 16.51 m

Answer

H = 16.51 m
6.Projectile motion

Answer: x = 113.4 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 33·cos 50° = 21.21 m/s
vy = v0·sin θ = 33·sin 50° = 25.28 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 5 + 25.28·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (25.28 + √(639.1 + 98.1))/9.81 = 5.345 s

Horizontal distance

x = vx·t = 21.21·5.345 = 113.4 m

Answer

x = 113.4 m
7.Circular motion

Answer: vmax = 15.34 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·80) = 15.34 m/s

Answer

vmax = 15.34 m/s (55.24 km/h)
8.Circular motion

Answer: T = 50.31 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1·9.81 + 1·4.5²/0.5 = 9.81 + 40.5 = 50.31 N

Answer

T = 50.31 N
9.Work & energy

Answer: v = 2.114 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·2·(0.2588 − 0.15·0.9659)) = 2.114 m/s

Answer

v = 2.114 m/s
10.Work & energy

Answer: d = 0.6636 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 8 cm = 0.08 m
½kx² = ½·5000·0.08² = 16 J

Energy balance along the slope

m·g = 3·9.81 = 29.43 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 16/(29.43·(0.5736 + 0.3·0.8192)) = 0.6636 m

Answer

d = 0.6636 m
11.Momentum & collisions

Answer: ΔK = 52338 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 600·18/1300 = 8.308 m/s

Kinetic energy before and after

Kbefore = ½·600·18² = 97200 J
Kafter = ½·1300·8.308² = 44862 J

Energy lost

ΔK = 97200 − 44862 = 52338 J

Answer

ΔK = 52338 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: v = 215.3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.1·(1 − cos 10°) = 0.01671 m

Speed after impact

V = √(2·9.81·0.01671) = 0.5726 m/s

Collision

v = (m + M)·V/m = 4.512·0.5726/0.012 = 215.3 m/s

Answer

v = 215.3 m/s
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·1.5) = 9.81 rad/s²

Acceleration of the free end

atip = α·L = 9.81·1.5 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: p = 50 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·18·9.5² = 812.3 J
Erot = ½·I·ω² = ½·1·m·r²·(v/r)² = 1·812.3 = 812.3 J

Rotational share

p = 812.3/1625·100% = c/(1 + c)·100% = 50%

Answer

p = 50 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: n2 = 784 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1500·160/300 = 800 rpm

With slip

n2 = 800·0.98 = 784 rpm

Answer

n2 = 784 rpm
16.Gears & gear trains

Answer: ND = 50

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 2880·24/72 = 960 rpm

Teeth on gear D

ND = C·nC/nout = 24·960/460.8 = 50

Answer

ND = 50
17.Springs & pendulums

Answer: L = 0.3007 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(1.1/2π)² = 0.3007 m

Answer

L = 0.3007 m
18.Springs & pendulums

Answer: amax = 9.852 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(190/2.7) = 8.389 rad/s

Maximum acceleration

amax = A·ω² = 0.14·8.389² = 9.852 m/s²

Answer

amax = 9.852 m/s²
19.Mechanical vibrations

Answer: ζ = 0.2012

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(50000·25) = 2236 N·s/m

Damping ratio

ζ = c/cc = 450/2236 = 0.2012

Answer

ζ = 0.2012

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: keq = 150 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 50 + 100 = 150 kN/m

Answer

keq = 150 kN/m

ExamProblems · examproblems.com/courses/dynamics