Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 2100 m

A plane needs a speed of 260 km/h to take off and the usable runway is 2100 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 260 km/hs = 2100 m
a = m/s²
2.KinematicsHard
AB: 16 m/s10 m

Ball A is dropped from rest from a height of 10 m. At the same instant ball B is thrown straight up from the ground directly below at 16 m/s. Ignore air resistance and use g = 9.81 m/s². When do the balls meet? Find t.

H = 10 mv0B = 16 m/sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
9.5 kg3 kg

Masses of 9.5 kg and 3 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 9.5 kgm2 = 3 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
8 kg4 kgTF = 100 Nμ = 0.25

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 100 N pulls the front 4 kg block; the 8 kg block is towed behind. The coefficient of kinetic friction is 0.25 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 8 kgm2 = 4 kgF = 100 Nμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 16 m/s65°rangeH = ?

A ball is launched at 65° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 16 m/sθ = 65°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 40 mv0​ = 19 m/s40°v = ?

A ball is launched at 19 m/s and 40° above the horizontal from the top of a 40 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the speed v with which it hits the ground.

v₀ = 19 m/sθ = 40°h = 40 mg = 9.81 m/s²
v = m/s
7.Circular motionMedium
L = 1 m40°

A small ball on a string of length 1 m moves in a horizontal circle so that the string makes a constant angle of 40° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.

L = 1 mθ = 40°g = 9.81 m/s²
T = s
8.Circular motionHard
r = 0.9 mv = 5.5 m/s

A 0.8 kg ball on a string 0.9 m long is swung in a vertical circle. At the lowest point it moves at 5.5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 0.8 kgr = 0.9 mv = 5.5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
80 km/h

A car travelling at 80 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.5. Find the stopping distance d.

v = 80 km/hμ = 0.5g = 9.81 m/s²
d = m
10.Work & energyHard
h = 3.5 mL = 2.5 mμ = 0.15k = 2500 N/m

A 1 kg block is released from rest at height 3.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.15) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 1 kgh = 3.5 mL = 2.5 mμ = 0.15k = 2500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1 kg33 m/s7 kgv′2​ = ?

An 8 kg projectile moving horizontally at 10 m/s explodes into two fragments that move along the same line. The 1 kg fragment continues forwards at 33 m/s. Find the velocity v′2 of the 7 kg fragment (positive in the original direction).

M = 8 kgu = 10 m/sm1 = 1 kgv′1 = 33 m/sm2 = 7 kg
v′2 = m/s
12.Momentum & collisionsHard
800 kgv1​ = ?800 kg

An 800 kg car runs into a parked 800 kg car. The wrecks lock together and skid 15.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 800 kgm2 = 800 kgd = 15.5 mμ = 0.8g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
n = 3000 rpmP = 173.5 kW

A shaft transmits 173.5 kW at 3000 rpm. Find the torque T in the shaft.

P = 173.5 kWn = 3000 rpm
T = N·m
14.Rigid-body rotationHard
θ = 25°as = 6.5 m

A solid cylinder rolls without slipping down a slope inclined at 25° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 6.5 m down the slope?

θ = 25°I = ½·m·r²g = 9.81 m/s²s = 6.5 m
t = s
15.Gears & gear trainsMedium
N1​ = 24, m = 3 mm

A 5.5 kW motor running at 960 rpm drives a pinion with 24 teeth and a module of 3 mm. Find the tangential force Ft on the pinion teeth.

P = 5.5 kWn = 960 rpmN1 = 24m = 3 mm
Ft = N
16.Gears & gear trainsHard
A = 40B = 72C = 18D = 80

A 7.5 kW motor at 2900 rpm drives gear A (40 teeth), which meshes with gear B (72 teeth). Gear C (18 teeth) on the same shaft as B drives gear D (80 teeth) on the output shaft. Each gear mesh has an efficiency of 98%. Find the output torque Tout.

P = 7.5 kWnin = 2900 rpmA = 40B = 72C = 18D = 80ηmesh = 98%
Tout = N·m
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2 s? Use g = 9.81 m/s². Find L.

T = 2 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
2.8 kgk = 350 N/mA = 6 cm

A 2.8 kg mass on a spring with k = 350 N/m is pulled 6 cm from equilibrium and released. Find its maximum speed vmax.

m = 2.8 kgk = 350 N/mA = 6 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 25 kN/mζ = 0.4m = 100 kg

A 100 kg mass on a spring with a stiffness of 25 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 100 kgk = 25 kN/mζ = 0.4
fd = Hz
20.Mechanical vibrationsHard
k1​ = 80k2​ = 50m = 40 kg

A 40 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 80 kN/m and k₂ = 50 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 40 kgk1 = 80 kN/mk2 = 50 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: a = 1.242 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 260/3.6 = 72.22 m/s

Acceleration

a = v²/(2s) = 72.22²/(2·2100) = 1.242 m/s²

Answer

a = 1.242 m/s²
2.Kinematics

Answer: t = 0.625 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Meeting time

Up is positive, the ground is y = 0.

10 − ½g·t² = 16·t − ½g·t² → t = 10/16 = 0.625 s

Answer

t = 0.625 s
3.Newton’s laws

Answer: T = 44.73 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration

The net driving force is the difference of the weights; it moves the total mass.

a = (9.5 − 3)·9.81/(9.5 + 3) = 5.101 m/s²

Tension from the lighter mass

T − m2·g = m2·a → T = 3·(9.81 + 5.101) = 44.73 N

Answer

T = 44.73 N
4.Newton’s laws

Answer: T = 66.67 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (100 − 29.43)/12 = 5.881 m/s²

Rear block alone

T = m1·(a + μ·g) = 8·(5.881 + 2.453) = 66.67 N

Answer

T = 66.67 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: H = 10.72 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 16·cos 65° = 6.762 m/s
vy = v0·sin θ = 16·sin 65° = 14.5 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 14.5²/(2·9.81) = 10.72 m

Answer

H = 10.72 m
6.Projectile motion

Answer: v = 33.85 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 19·cos 40° = 14.55 m/s
vy0 = 19·sin 40° = 12.21 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(12.21² + 2·9.81·40) = 30.56 m/s

Impact speed

v = √(14.55² + 30.56²) = 33.85 m/s

Answer

v = 33.85 m/s

Check with energy: v² = v₀² + 2gh.

7.Circular motion

Answer: T = 1.756 s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 1·sin 40° = 0.6428 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.6428·9.81·tan 40°) = 2.3 m/s

Period

T = 2π·r/v = 2π·0.6428/2.3 = 1.756 s

Answer

T = 1.756 s
8.Circular motion

Answer: T = 34.74 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 0.8·9.81 + 0.8·5.5²/0.9 = 7.848 + 26.89 = 34.74 N

Answer

T = 34.74 N
9.Work & energy

Answer: d = 50.34 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 80/3.6 = 22.22 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 22.22²/(2·0.5·9.81) = 50.34 m

Answer

d = 50.34 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: v = 7.83 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 9.81·(3.5 − 0.15·2.5) = 30.66 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.125) = 7.83 m/s

Answer

v = 7.83 m/s
11.Momentum & collisions

Answer: v′2 = 6.714 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 8·10 = 80 kg·m/s

Momentum after

80 = 1·33 + 7·v′2
v′2 = (80 − 33)/7 = 6.714 m/s

Answer

v′2 = 6.714 m/s
12.Momentum & collisions

Answer: v1 = 31.2 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.8·9.81·15.5) = 15.6 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 1600·15.6/800 = 31.2 m/s

Answer

v1 = 31.2 m/s
(112.3 km/h)
13.Rigid-body rotation

Answer: T = 552.3 N·m

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·3000/60 = 314.2 rad/s

Torque

T = P/ω = 173500/314.2 = 552.3 N·m

Answer

T = 552.3 N·m
14.Rigid-body rotation

Answer: t = 2.169 s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.5·m·r²·(a/r) → f = 0.5·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 25°/1.5 = 2.764 m/s²

Time

s = ½·a·t² → t = √(2·6.5/2.764) = 2.169 s

Answer

t = 2.169 s
15.Gears & gear trains

Answer: Ft = 1520 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·960/60 = 100.5 rad/s
T = P/ω = 5500/100.5 = 54.71 N·m

Pitch diameter

d = m·N = 3·24 = 72 mm

Tangential force

Ft = 2T/d = 2·54.71/0.072 = 1520 N

Answer

Ft = 1520 N
16.Gears & gear trains

Answer: Tout = 189.7 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 2900·(40/72)·(18/80) = 362.5 rpm
ωout = 2π·362.5/60 = 37.96 rad/s

Output power and torque

Pout = 7500·0.98² = 7203 W
Tout = Pout/ωout = 7203/37.96 = 189.7 N·m

Answer

Tout = 189.7 N·m
17.Springs & pendulums

Answer: L = 0.994 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2/2π)² = 0.994 m

Answer

L = 0.994 m
18.Springs & pendulums

Answer: vmax = 0.6708 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(350/2.8) = 11.18 rad/s

Maximum speed

vmax = A·ω = 0.06·11.18 = 0.6708 m/s

Answer

vmax = 0.6708 m/s
19.Mechanical vibrations

Answer: fd = 2.306 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(25000/100) = 15.81 rad/s
fn = 15.81/(2π) = 2.516 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 2.516·√(1 − 0.4²) = 2.306 Hz

Answer

fd = 2.306 Hz
20.Mechanical vibrations

Answer: fn = 9.073 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 80 + 50 = 130 kN/m

Natural frequency

ωn = √(130000/40) = 57.01 rad/s
fn = 57.01/(2π) = 9.073 Hz

Answer

fn = 9.073 Hz

ExamProblems · examproblems.com/courses/dynamics