Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)5.556 s16.67

A car driving at 60 km/h brakes with a constant deceleration of 3 m/s² until it stops. Find the braking distance s.

v₀ = 60 km/ha = −3 m/s²v = 0
s = m
2.KinematicsHard
AB: 13 m/s10 m

Ball A is dropped from rest from a height of 10 m. At the same instant ball B is thrown straight up from the ground directly below at 13 m/s. Ignore air resistance and use g = 9.81 m/s². When do the balls meet? Find t.

H = 10 mv0B = 13 m/sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 30°a = ?m = 19 kg

A 19 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 19 kgθ = 30°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 35°blockv₀ = 10.5 m/s

A block is given a push so that it starts sliding up a ramp at 35° with a speed of 10.5 m/s. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 10.5 m/sθ = 35°μ = 0.1g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 22 m/s45°rangeH = ?

A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 22 m/sθ = 45°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 20 mv0​ = 25 m/s55°range

A ball is launched at 55° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 25 m/sθ = 55°h = 20 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 1.7 mω = ?

In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 1.7 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.4. Use g = 9.81 m/s². Find the smallest angular speed ω in rad/s.

r = 1.7 mμs = 0.4g = 9.81 m/s²
ω = rad/s
8.Circular motionHard
r = 0.7 mv = 3 m/s

A 1.9 kg ball on a string 0.7 m long is swung in a vertical circle. At the lowest point it moves at 3 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.9 kgr = 0.7 mv = 3 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
40°d = 3 mμ = 0.25

A 4 kg block slides 3 m down a slope at 40° to the horizontal, with a coefficient of kinetic friction of 0.25. Find the work Wf done against friction.

m = 4 kgθ = 40°μ = 0.25d = 3 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
F = 25 N30°μ = 0.252 kg

A 2 kg block starts from rest at the bottom of a 30° slope and is pulled up the slope by a constant force of 25 N parallel to the slope. The coefficient of kinetic friction is 0.25. Find the speed v of the block after it has moved 8 m up the slope.

m = 2 kgF = 25 Nθ = 30°μ = 0.25d = 8 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1300 kg16 m/s800 kg

A 1300 kg car moving at 16 m/s runs into a stationary 800 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 1300 kgv1 = 16 m/sm2 = 800 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
1700 kg16 m/s1200 kg18 m/sθ = ?

At a crossing a 1700 kg car travelling east at 16 m/s collides with a 1200 kg car travelling north at 18 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 1700 kgv1 = 16 m/s (E)m2 = 1200 kgv2 = 18 m/s (N)
θ = °
13.Rigid-body rotationMedium
L = 1.2 mm = 13.5 kgα

A uniform slender rod of mass 13.5 kg and length 1.2 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find its angular acceleration α just after release.

m = 13.5 kgL = 1.2 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
0.85 m0.3 mn1​ = 20 rpm

A person stands on a frictionless turntable and holds a 6 kg dumbbell in each hand, 0.85 m from the axis. The person and turntable alone have a moment of inertia of 4 kg·m² about the axis. They turn at 20 rpm, then pull the dumbbells in to 0.3 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 4 kg·m²m = 2 × 6 kgr1 = 0.85 mr2 = 0.3 mn1 = 20 rpm
n2 = rpm
15.Gears & gear trainsMedium
N1​ = 12N2​ = 16

A 1.5 kW motor running at 960 rpm drives a pinion with 12 teeth, which meshes with a gear with 16 teeth. The gear pair has an efficiency of 98%. Find the torque T1 on the motor shaft.

P = 1.5 kWn1 = 960 rpmN1 = 12N2 = 16η = 98%
T1 = N·m
16.Gears & gear trainsHard
d1​ = 80 mmd2​ = 500 mm1440 rpmC = 1200 mmT1​ = 1000 NT2​P = ?

An open belt connects an 80 mm driving pulley at 1440 rpm to a 500 mm pulley; the centres are 1200 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 1000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 80 mmn1 = 1440 rpmd2 = 500 mmC = 1200 mmμ = 0.3T1 = 1000 N
P = kW
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.5 s? Use g = 9.81 m/s². Find L.

T = 2.5 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
mk = 460 N/mA = 5 cmx = 4 cm

A mass on a spring with k = 460 N/m oscillates on a frictionless surface with an amplitude of 5 cm. Find its kinetic energy K when it is 4 cm from equilibrium.

k = 460 N/mA = 5 cmx = 4 cm
K = J
19.Mechanical vibrationsMedium
tx50 mm5 cycles1.1 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 50 mm is followed 5 cycles later by a peak of 1.1 mm. Find the damping ratio ζ.

x0 = 50 mmx5 = 1.1 mmn = 5
ζ =
20.Mechanical vibrationsHard
k1​ = 15k2​ = 30m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 15 kN/m and k₂ = 30 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 100 kgk1 = 15 kN/mk2 = 30 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 46.3 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 60/3.6 = 16.67 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 16.67²/(2·3) = 46.3 m

Answer

s = 46.3 m
2.Kinematics

Answer: t = 0.7692 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Meeting time

Up is positive, the ground is y = 0.

10 − ½g·t² = 13·t − ½g·t² → t = 10/13 = 0.7692 s

Answer

t = 0.7692 s
3.Newton’s laws

Answer: a = 2.781 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.25·cos 30°) = 9.81·(0.5 − 0.2165) = 2.781 m/s²

Answer

a = 2.781 m/s²
4.Newton’s laws

Answer: d = 8.573 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 35° + 0.1·cos 35°) = 6.43 m/s²

Distance

d = v₀²/(2a) = 10.5²/(2·6.43) = 8.573 m

Answer

d = 8.573 m
5.Projectile motion

Answer: H = 12.33 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 22·cos 45° = 15.56 m/s
vy = v0·sin θ = 22·sin 45° = 15.56 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 15.56²/(2·9.81) = 12.33 m

Answer

H = 12.33 m
6.Projectile motion

Answer: t = 4.992 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 25·cos 55° = 14.34 m/s
vy = v0·sin θ = 25·sin 55° = 20.48 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 20 + 20.48·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (20.48 + √(419.4 + 392.4))/9.81 = 4.992 s

Answer

t = 4.992 s
7.Circular motion

Answer: ω = 3.798 rad/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces on a rider

N = m·ω²·r
μ·N = m·g → μ·ω²·r = g

Angular speed

ω = √(g/(μ·r)) = √(9.81/(0.4·1.7)) = 3.798 rad/s

Answer

ω = 3.798 rad/s
8.Circular motion

Answer: T = 43.07 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.9·9.81 + 1.9·3²/0.7 = 18.64 + 24.43 = 43.07 N

Answer

T = 43.07 N
9.Work & energy

Answer: Wf = 22.54 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 39.24·0.766 = 30.06 N
F = μN = 0.25·30.06 = 7.515 N

Work against friction

Wf = F·d = 7.515·3 = 22.54 J

Answer

Wf = 22.54 J
10.Work & energy

Answer: v = 9.356 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 2·9.81 = 19.62 N
mg·sin θ = 9.81 N
μ·mg·cos θ = 4.248 N

Work–energy

½mv² = (25 − 14.06)·8 = 87.54 J
v = √(2·87.54/2) = 9.356 m/s

Answer

v = 9.356 m/s
11.Momentum & collisions

Answer: ΔK/K = 38.1 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1300·16/2100 = 9.905 m/s

Kinetic energy before and after

Kbefore = ½·1300·16² = 166400 J
Kafter = ½·2100·9.905² = 103010 J

Fraction lost

ΔK/K = 63390/166400 = 38.1 %

Answer

ΔK/K = 38.1 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: θ = 38.45 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1700·16 = 27200 kg·m/s
py = 1200·18 = 21600 kg·m/s

Direction

tan θ = py/px = 0.7941 → θ = 38.45°

Answer

θ = 38.45°
13.Rigid-body rotation

Answer: α = 12.26 rad/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·1.2) = 12.26 rad/s²

Answer

α = 12.26 rad/s²
14.Rigid-body rotation

Answer: n2 = 49.88 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 4 + 2·6·0.85² = 12.67 kg·m²
I2 = 4 + 2·6·0.3² = 5.08 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 20·12.67/5.08 = 49.88 rpm

Answer

n2 = 49.88 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: T1 = 14.92 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 1500/100.5 = 14.92 N·m

Answer

T1 = 14.92 N·m
16.Gears & gear trains

Answer: P = 3.42 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.79 rad

Slack-side tension

eμθ = e0.8369 = 2.309, T₂ = 1000/2.309 = 433 N

Power

P = (1000 − 433)·6.032 = 3.42 kW

Answer

P = 3.42 kW
17.Springs & pendulums

Answer: L = 1.553 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.5/2π)² = 1.553 m

Answer

L = 1.553 m
18.Springs & pendulums

Answer: K = 0.207 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·460·0.05² = 0.575 J

Spring energy at x

U = ½·k·x² = ½·460·0.04² = 0.368 J

Kinetic energy

K = 0.575 − 0.368 = 0.207 J

Answer

K = 0.207 J
19.Mechanical vibrations

Answer: ζ = 0.1206

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(50/1.1) = 0.7633

Damping ratio

ζ = δ/√(4π² + δ²) = 0.7633/√(39.48 + 0.5827) = 0.1206

Answer

ζ = 0.1206
20.Mechanical vibrations

Answer: keq = 45 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 15 + 30 = 45 kN/m

Answer

keq = 45 kN/m

ExamProblems · examproblems.com/courses/dynamics