Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.2 s30

A driver moving at 108 km/h sees an obstacle. Her reaction time is 1.2 s, after which the car brakes with a constant deceleration of 4.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 108 km/htr = 1.2 sa = −4.5 m/s²
d = m
2.KinematicsHard
v₀ = 12 m/s5 m

A ball is thrown straight up at 12 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 12 m/sh₀ = 5 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 20°a = ?m = 17 kg

A 17 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 17 kgθ = 20°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
11 kg12 kgTF = 100 Nμ = 0.25

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 100 N pulls the front 12 kg block; the 11 kg block is towed behind. The coefficient of kinetic friction is 0.25 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 11 kgm2 = 12 kgF = 100 Nμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 38 m/s55°rangeH = ?

A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 38 m/sθ = 55°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 25 mv0​ = 16 m/s35°range

A ball is launched at 35° above horizontal from the top of a 25 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 16 m/sθ = 35°h = 25 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 40 mvmax​ = ?

A car takes a flat curve of radius 40 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 40 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1 mv = 8 m/s

A 1.1 kg ball on a string 1 m long is swung in a vertical circle. At the lowest point it moves at 8 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.1 kgr = 1 mv = 8 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
25°d = 2 mμ = 0.15

A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 2 m along the slope.

θ = 25°μ = 0.15d = 2 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
5 kg3 kgμ = 0.2d = 1 m

A 5 kg block rests on a rough horizontal table (μ = 0.2). A light string runs from it over a smooth pulley at the edge of the table to a hanging 3 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 1 m.

m1 = 5 kgm2 = 3 kgμ = 0.2d = 1 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1 kg4 m/s2 kg

A 1 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 2 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 1 kgm2 = 2 kgv1 = 4 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
2000 kgv1​ = ?1700 kg

A 2000 kg car runs into a parked 1700 kg car. The wrecks lock together and skid 9 m before stopping. The coefficient of kinetic friction between tyres and road is 0.75. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 2000 kgm2 = 1700 kgd = 9 mμ = 0.75g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
n = 2800 rpmP = 196 kW

A shaft transmits 196 kW at 2800 rpm. Find the torque T in the shaft.

P = 196 kWn = 2800 rpm
T = N·m
14.Rigid-body rotationHard
0.8 m0.2 mn1​ = 50 rpm

A person stands on a frictionless turntable and holds a 5 kg dumbbell in each hand, 0.8 m from the axis. The person and turntable alone have a moment of inertia of 3.5 kg·m² about the axis. They turn at 50 rpm, then pull the dumbbells in to 0.2 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 3.5 kg·m²m = 2 × 5 kgr1 = 0.8 mr2 = 0.2 mn1 = 50 rpm
n2 = rpm
15.Gears & gear trainsMedium
d1​ = 120 mmd2​ = 315 mm2880 rpmn2​ = ?

A 120 mm pulley at 2880 rpm drives a 315 mm pulley by a belt with 1 % slip. Find the speed n2 of the driven pulley.

n1 = 2880 rpmd1 = 120 mmd2 = 315 mms = 1 %
n2 = rpm
16.Gears & gear trainsHard
Ns​ = 20nr​ = ?Np​ = 30carrier fixed

In a planetary gear set the sun gear has 20 teeth and each planet gear has 30 teeth. The planet carrier is held fixed and the sun is driven at 900 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 20Np = 30ns = 900 rpm
nr = rpm
17.Springs & pendulumsMedium
L = 0.9 mT = 2 s

An astronaut on another planet finds that a simple pendulum 0.9 m long has a period of 2 s for small swings. Find the gravitational acceleration g on that planet.

L = 0.9 mT = 2 s
g = m/s²
18.Springs & pendulumsHard
1.1 kgk = 130 N/mA = 14 cm

A 1.1 kg mass on a spring with k = 130 N/m is pulled 14 cm from equilibrium and released. Find its maximum acceleration amax.

m = 1.1 kgk = 130 N/mA = 14 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 100 kN/mc = 3160 N·s/mm = 100 kg

A 100 kg mass is supported by a spring with a stiffness of 100 kN/m and a viscous damper with a damping coefficient of 3160 N·s/m. Find the damping ratio ζ.

m = 100 kgk = 100 kN/mc = 3160 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 100m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 100 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 5 kgk1 = 30 kN/mk2 = 100 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: d = 136 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 108/3.6 = 30 m/s

Reaction distance

d1 = v₀·tr = 30·1.2 = 36 m

Braking distance

d2 = v₀²/(2a) = 30²/(2·4.5) = 100 m

Total

d = 36 + 100 = 136 m

Answer

d = 136 m
2.Kinematics

Answer: hmax = 12.34 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 12²/(2·9.81) = 7.339 m

Height above the ground

hmax = 5 + 7.339 = 12.34 m

Answer

hmax = 12.34 m
3.Newton’s laws

Answer: a = 1.051 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0.25·cos 20°) = 9.81·(0.342 − 0.2349) = 1.051 m/s²

Answer

a = 1.051 m/s²
4.Newton’s laws

Answer: T = 47.83 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (100 − 56.41)/23 = 1.895 m/s²

Rear block alone

T = m1·(a + μ·g) = 11·(1.895 + 2.453) = 47.83 N

Answer

T = 47.83 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: H = 49.39 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 38·cos 55° = 21.8 m/s
vy = v0·sin θ = 38·sin 55° = 31.13 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 31.13²/(2·9.81) = 49.39 m

Answer

H = 49.39 m
6.Projectile motion

Answer: t = 3.379 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 16·cos 35° = 13.11 m/s
vy = v0·sin θ = 16·sin 35° = 9.177 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 25 + 9.177·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (9.177 + √(84.22 + 490.5))/9.81 = 3.379 s

Answer

t = 3.379 s
7.Circular motion

Answer: vmax = 10.85 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·40) = 10.85 m/s

Answer

vmax = 10.85 m/s (39.06 km/h)
8.Circular motion

Answer: T = 81.19 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.1·9.81 + 1.1·8²/1 = 10.79 + 70.4 = 81.19 N

Answer

T = 81.19 N
9.Work & energy

Answer: v = 3.354 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·2·(0.4226 − 0.15·0.9063)) = 3.354 m/s

Answer

v = 3.354 m/s
10.Work & energy

Answer: v = 2.215 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 29.43·1 = 29.43 J
μ·m₁g·d = 0.2·49.05·1 = 9.81 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 19.62 → v = √(2·19.62/8) = 2.215 m/s

Answer

v = 2.215 m/s
11.Momentum & collisions

Answer: v′1 = −1.333 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1 − 2)/(1 + 2)·4 = −1.333 m/s
v′2 = 2·1/(1 + 2)·4 = 2.667 m/s

Answer

v′1 = −1.333 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: v1 = 21.29 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.75·9.81·9) = 11.51 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 3700·11.51/2000 = 21.29 m/s

Answer

v1 = 21.29 m/s
(76.64 km/h)
13.Rigid-body rotation

Answer: T = 668.5 N·m

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2800/60 = 293.2 rad/s

Torque

T = P/ω = 196000/293.2 = 668.5 N·m

Answer

T = 668.5 N·m
14.Rigid-body rotation

Answer: n2 = 126.9 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 3.5 + 2·5·0.8² = 9.9 kg·m²
I2 = 3.5 + 2·5·0.2² = 3.9 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 50·9.9/3.9 = 126.9 rpm

Answer

n2 = 126.9 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: n2 = 1086 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

2880·120/315 = 1097 rpm

With slip

n2 = 1097·0.99 = 1086 rpm

Answer

n2 = 1086 rpm
16.Gears & gear trains

Answer: nr = 225 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 20 + 2·30 = 80

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −900·20/80 = −225 rpm
|nr| = 225 rpm

Answer

nr = 225 rpm

The ring turns opposite to the sun.

17.Springs & pendulums

Answer: g = 8.883 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·0.9/2² = 8.883 m/s²

Answer

g = 8.883 m/s²
18.Springs & pendulums

Answer: amax = 16.55 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(130/1.1) = 10.87 rad/s

Maximum acceleration

amax = A·ω² = 0.14·10.87² = 16.55 m/s²

Answer

amax = 16.55 m/s²
19.Mechanical vibrations

Answer: ζ = 0.4996

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(100000·100) = 6325 N·s/m

Damping ratio

ζ = c/cc = 3160/6325 = 0.4996

Answer

ζ = 0.4996

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: keq = 23.08 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/30 + 1/100 → keq = 30·100/(30 + 100) = 23.08 kN/m

Answer

keq = 23.08 kN/m

ExamProblems · examproblems.com/courses/dynamics