Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.968 s13.89

A car driving at 50 km/h brakes with a constant deceleration of 3.5 m/s² until it stops. Find the braking distance s.

v₀ = 50 km/ha = −3.5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 15 m/s20 m

A ball is thrown straight up at 15 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 15 m/sh₀ = 20 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 35°a = ?m = 13 kg

A 13 kg block slides down a frictionless slope at 35° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 13 kgθ = 35°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 1 kg2.5 kgμ = 0.1

A 1 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 1 kgm2 = 2.5 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 30 m/s40°rangeH = ?

A ball is launched at 40° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 30 m/sθ = 40°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 40 mv0​ = 23 m/s55°range

A ball is launched at 55° above horizontal from the top of a 40 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 23 m/sθ = 55°h = 40 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 3.4 mω = ?

In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 3.4 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.8. Use g = 9.81 m/s². Find the smallest angular speed ω in rad/s.

r = 3.4 mμs = 0.8g = 9.81 m/s²
ω = rad/s
8.Circular motionHard
r = 1.4 m11 m/svtop​ = ?

A 1.7 kg ball on a light string 1.4 m long is swung in a vertical circle. At the lowest point its speed is 11 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 1.7 kgr = 1.4 mvbottom = 11 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
90°L = 3 m2 kg

A 2 kg ball hangs on a light string of length 3 m. It is pulled aside until the string makes 90° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 2 kgL = 3 mθ = 90°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 1.5 mL = 3.5 mμ = 0.2k = 2500 N/m

A 1 kg block is released from rest at height 1.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.2) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 1 kgh = 1.5 mL = 3.5 mμ = 0.2k = 2500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
2000 kg18 m/s500 kg

A 2000 kg car moving at 18 m/s runs into a stationary 500 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 2000 kgv1 = 18 m/sm2 = 500 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
25 m/s15 m/s

A 0.15 kg ball hits a wall at 25 m/s and bounces straight back at 15 m/s. The contact lasts 20 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.15 kgvin = 25 m/svout = 15 m/sΔt = 20 ms
J = N·s
13.Rigid-body rotationMedium
ω = ?L = 1.3 mm = 1 kg

A uniform slender rod of mass 1 kg and length 1.3 m is pinned at one end and released from rest in a horizontal position. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 1 kgL = 1.3 mg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
θ = 15°vs = 4.5 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². Its radius is 0.1 m. Find its angular velocity ω after it has rolled 4.5 m along the slope.

θ = 15°s = 4.5 mI = m·r²g = 9.81 m/s²r = 0.1 m
ω = rad/s
15.Gears & gear trainsMedium
d1​ = 120 mmd2​ = 400 mm2880 rpmT1​ = 800 NT2​ = 240 NP = ?

A belt runs on a 120 mm driving pulley at 2880 rpm. The tension is 800 N on the tight side and 240 N on the slack side. Find the power P transmitted, in kW.

d1 = 120 mmn1 = 2880 rpmT1 = 800 NT2 = 240 N
P = kW
16.Gears & gear trainsHard
d1​ = 120 mmd2​ = 500 mm1440 rpmC = 800 mmT1​ = 2000 NT2​P = ?

An open belt connects a 120 mm driving pulley at 1440 rpm to a 500 mm pulley; the centres are 800 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 2000 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 120 mmn1 = 1440 rpmd2 = 500 mmC = 800 mmμ = 0.3T1 = 2000 N
P = kW
17.Springs & pendulumsMedium
t (s)x (cm)0.5 s

A 3.7 kg mass on a spring with k = 130 N/m is pulled 11 cm in the positive direction and released from rest at t = 0. Find its velocity v at t = 0.5 s (with sign).

m = 3.7 kgk = 130 N/mA = 11 cmt = 0.5 s
v = m/s
18.Springs & pendulumsHard
mk = 90 N/mA = 20 cmx = 7 cm

A mass on a spring with k = 90 N/m oscillates on a frictionless surface with an amplitude of 20 cm. Find its kinetic energy K when it is 7 cm from equilibrium.

k = 90 N/mA = 20 cmx = 7 cm
K = J
19.Mechanical vibrationsMedium
k = 15 kN/mc = 490 N·s/mm = 100 kg

A 100 kg mass is supported by a spring with a stiffness of 15 kN/m and a viscous damper with a damping coefficient of 490 N·s/m. Find the damping ratio ζ.

m = 100 kgk = 15 kN/mc = 490 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 20k2​ = 5m = 10 kg

A 10 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 20 kN/m and k₂ = 5 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 20 kN/mk2 = 5 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 27.56 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 50/3.6 = 13.89 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 13.89²/(2·3.5) = 27.56 m

Answer

s = 27.56 m
2.Kinematics

Answer: hmax = 31.47 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 15²/(2·9.81) = 11.47 m

Height above the ground

hmax = 20 + 11.47 = 31.47 m

Answer

hmax = 31.47 m
3.Newton’s laws

Answer: a = 5.627 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0·cos 35°) = 9.81·(0.5736 − 0) = 5.627 m/s²

Answer

a = 5.627 m/s²
4.Newton’s laws

Answer: T = 7.708 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (24.53 − 0.981)/3.5 = 6.727 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 1·6.727 + 0.981 = 7.708 N

Answer

T = 7.708 N
5.Projectile motion

Answer: H = 18.95 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 30·cos 40° = 22.98 m/s
vy = v0·sin θ = 30·sin 40° = 19.28 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 19.28²/(2·9.81) = 18.95 m

Answer

H = 18.95 m
6.Projectile motion

Answer: t = 5.362 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 23·cos 55° = 13.19 m/s
vy = v0·sin θ = 23·sin 55° = 18.84 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 40 + 18.84·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (18.84 + √(355 + 784.8))/9.81 = 5.362 s

Answer

t = 5.362 s
7.Circular motion

Answer: ω = 1.899 rad/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces on a rider

N = m·ω²·r
μ·N = m·g → μ·ω²·r = g

Angular speed

ω = √(g/(μ·r)) = √(9.81/(0.8·3.4)) = 1.899 rad/s

Answer

ω = 1.899 rad/s
8.Circular motion

Answer: Ttop = 63.54 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 11² − 4·9.81·1.4 = 66.06 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 1.7·66.06/1.4 − 1.7·9.81 = 63.54 N

Answer

Ttop = 63.54 N
9.Work & energy

Answer: T = 58.86 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·3·(1 − cos 90°) = 58.86 m²/s²

Forces at the bottom

m·g = 2·9.81 = 19.62 N
T = mg + mv²/L = 19.62 + 2·58.86/3 = 58.86 N

Answer

T = 58.86 N

Check: T = mg(3 − 2cos θ) = 58.86 N.

10.Work & energy

Answer: v = 3.962 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 9.81·(1.5 − 0.2·3.5) = 7.848 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·0.8) = 3.962 m/s

Answer

v = 3.962 m/s
11.Momentum & collisions

Answer: ΔK/K = 20 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 2000·18/2500 = 14.4 m/s

Kinetic energy before and after

Kbefore = ½·2000·18² = 324000 J
Kafter = ½·2500·14.4² = 259200 J

Fraction lost

ΔK/K = 64800/324000 = 20 %

Answer

ΔK/K = 20 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: J = 6 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.15·(15 + 25) = 6 N·s

Answer

J = 6 N·s
13.Rigid-body rotation

Answer: ω = 4.758 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 = 1·9.81·0.65 = 6.377 J

Moment of inertia about the pin

IO = m·L²/3 = 1·1.3²/3 = 0.5633 kg·m²

Energy balance

½·IO·ω² = 6.377 → ω = √(2·6.377/0.5633) = 4.758 rad/s

Answer

ω = 4.758 rad/s
14.Rigid-body rotation

Answer: ω = 33.8 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 4.5·sin 15° = 1.165 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·1.165/2) = 3.38 m/s
ω = v/r = 3.38/0.1 = 33.8 rad/s

Answer

ω = 33.8 rad/s
15.Gears & gear trains

Answer: P = 10.13 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 18.1 m/s

Power

P = (800 − 240)·18.1 = 10134 W = 10.13 kW

Answer

P = 10.13 kW
16.Gears & gear trains

Answer: P = 9.953 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.662 rad

Slack-side tension

eμθ = e0.7986 = 2.222, T₂ = 2000/2.222 = 899.9 N

Power

P = (2000 − 899.9)·9.048 = 9.953 kW

Answer

P = 9.953 kW
17.Springs & pendulums

Answer: v = −0.1154 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(130/3.7) = 5.927 rad/s
ω·t = 5.927·0.5 = 2.964 rad

Velocity

v = −A·ω·sin(ω·t) = −0.11·5.927·sin(2.964) = −0.1154 m/s

Answer

v = −0.1154 m/s
18.Springs & pendulums

Answer: K = 1.58 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·90·0.2² = 1.8 J

Spring energy at x

U = ½·k·x² = ½·90·0.07² = 0.2205 J

Kinetic energy

K = 1.8 − 0.2205 = 1.58 J

Answer

K = 1.58 J
19.Mechanical vibrations

Answer: ζ = 0.2

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(15000·100) = 2449 N·s/m

Damping ratio

ζ = c/cc = 490/2449 = 0.2

Answer

ζ = 0.2

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 7.958 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 20 + 5 = 25 kN/m

Natural frequency

ωn = √(25000/10) = 50 rad/s
fn = 50/(2π) = 7.958 Hz

Answer

fn = 7.958 Hz

ExamProblems · examproblems.com/courses/dynamics