Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.75 s30

A car driving at 108 km/h brakes with a constant deceleration of 8 m/s² until it stops. Find the braking distance s.

v₀ = 108 km/ha = −8 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 18 m/s25 m

A ball is thrown straight up at 18 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 18 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 40°a = ?m = 5 kg

A 5 kg block slides down a frictionless slope at 40° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 5 kgθ = 40°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 2 kg5 kgμ = 0.1

A 2 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 2 kgm2 = 5 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 14 m/s50°rangeH = ?

A ball is launched at 50° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 14 m/sθ = 50°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 50 mv0​ = 34 m/s35°range

A ball is launched at 35° above horizontal from the top of a 50 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 34 m/sθ = 35°h = 50 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 40 mvmax​ = ?

A car takes a flat curve of radius 40 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 40 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.1 mv = ?

A ball on a string 1.1 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1.1 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
45°d = 8 mμ = 0.35

A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.35. Find its speed v after it has slid 8 m along the slope.

θ = 45°μ = 0.35d = 8 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 3.5 mL = 3 mμ = 0.2k = 5000 N/m

A 0.5 kg block is released from rest at height 3.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3 m long (μ = 0.2) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 0.5 kgh = 3.5 mL = 3 mμ = 0.2k = 5000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
3 kg6 m/s1 kg

A 3 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 1 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 3 kgm2 = 1 kgv1 = 6 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
25 m/s16 m/s

A 0.15 kg ball hits a wall at 25 m/s and bounces straight back at 16 m/s. The contact lasts 50 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.15 kgvin = 25 m/svout = 16 m/sΔt = 50 ms
J = N·s
13.Rigid-body rotationMedium
ω = ?5 kgL = 1.3 mm = 8 kg

A uniform slender rod of mass 8 kg and length 1.3 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 5 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 8 kgL = 1.3 mmball = 5 kgg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
8.5 m/sω

A thin hoop of mass 18.5 kg rolls without slipping at 8.5 m/s. What percentage p of its total kinetic energy is rotational?

m = 18.5 kgv = 8.5 m/sI = m·r²
p = %
15.Gears & gear trainsMedium
N1​ = 30N2​ = 60

A 15 kW motor running at 960 rpm drives a pinion with 30 teeth, which meshes with a gear with 60 teeth. The gear pair has an efficiency of 97%. Find the torque T1 on the motor shaft.

P = 15 kWn1 = 960 rpmN1 = 30N2 = 60η = 97%
T1 = N·m
16.Gears & gear trainsHard
Ns​ = 12nr​ = ?Np​ = 12carrier fixed

In a planetary gear set the sun gear has 12 teeth and each planet gear has 12 teeth. The planet carrier is held fixed and the sun is driven at 900 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 12Np = 12ns = 900 rpm
nr = rpm
17.Springs & pendulumsMedium
t (s)x (cm)1.35 s

A 2 kg mass on a spring with k = 180 N/m is pulled 4 cm in the positive direction and released from rest at t = 0. Find its velocity v at t = 1.35 s (with sign).

m = 2 kgk = 180 N/mA = 4 cmt = 1.35 s
v = m/s
18.Springs & pendulumsHard
3 kgk = 280 N/m

A 3 kg mass is attached to the lower end of an unstretched vertical spring with k = 280 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.

m = 3 kgk = 280 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
tx50 mm4 cycles2.4 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 50 mm is followed 4 cycles later by a peak of 2.4 mm. Find the damping ratio ζ.

x0 = 50 mmx4 = 2.4 mmn = 4
ζ =
20.Mechanical vibrationsHard
k1​ = 15k2​ = 15m = 25 kg

A 25 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 15 kN/m and k₂ = 15 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 15 kN/mk2 = 15 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 56.25 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 108/3.6 = 30 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 30²/(2·8) = 56.25 m

Answer

s = 56.25 m
2.Kinematics

Answer: t = 4.744 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−25 = 18·t − ½·9.81·t²
4.905·t² − 18·t − 25 = 0

Solve the quadratic

Only the positive root is physical.

t = (18 + √(18² + 2·9.81·25))/9.81 = 4.744 s

Answer

t = 4.744 s
3.Newton’s laws

Answer: a = 6.306 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0·cos 40°) = 9.81·(0.6428 − 0) = 6.306 m/s²

Answer

a = 6.306 m/s²
4.Newton’s laws

Answer: T = 15.42 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (49.05 − 1.962)/7 = 6.727 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 2·6.727 + 1.962 = 15.42 N

Answer

T = 15.42 N
5.Projectile motion

Answer: H = 5.862 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 14·cos 50° = 8.999 m/s
vy = v0·sin θ = 14·sin 50° = 10.72 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 10.72²/(2·9.81) = 5.862 m

Answer

H = 5.862 m
6.Projectile motion

Answer: t = 5.749 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 34·cos 35° = 27.85 m/s
vy = v0·sin θ = 34·sin 35° = 19.5 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 50 + 19.5·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (19.5 + √(380.3 + 981))/9.81 = 5.749 s

Answer

t = 5.749 s
7.Circular motion

Answer: vmax = 15.34 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·40) = 15.34 m/s

Answer

vmax = 15.34 m/s (55.24 km/h)
8.Circular motion

Answer: vmin = 3.285 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1.1) = 3.285 m/s

Answer

vmin = 3.285 m/s
9.Work & energy

Answer: v = 8.494 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·8·(0.7071 − 0.35·0.7071)) = 8.494 m/s

Answer

v = 8.494 m/s
10.Work & energy

Answer: x = 7.543 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(3.5 − 0.2·3) = 14.22 J

Maximum compression

½kx² = 14.22 → x = √(2·14.22/5000) = 0.07543 m = 7.543 cm

Answer

x = 7.543 cm
11.Momentum & collisions

Answer: v′2 = 9 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (3 − 1)/(3 + 1)·6 = 3 m/s
v′2 = 2·3/(3 + 1)·6 = 9 m/s

Answer

v′2 = 9 m/s
12.Momentum & collisions

Answer: J = 6.15 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.15·(16 + 25) = 6.15 N·s

Answer

J = 6.15 N·s
13.Rigid-body rotation

Answer: ω = 4.209 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 8·9.81·0.65 + 5·9.81·1.3 = 114.8 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 4.507 + 8.45 = 12.96 kg·m²

Energy balance

½·IO·ω² = 114.8 → ω = √(2·114.8/12.96) = 4.209 rad/s

Answer

ω = 4.209 rad/s
14.Rigid-body rotation

Answer: p = 50 %

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·18.5·8.5² = 668.3 J
Erot = ½·I·ω² = ½·1·m·r²·(v/r)² = 1·668.3 = 668.3 J

Rotational share

p = 668.3/1337·100% = c/(1 + c)·100% = 50%

Answer

p = 50 %

The share depends only on the shape, not on the mass or the speed.

15.Gears & gear trains

Answer: T1 = 149.2 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 15000/100.5 = 149.2 N·m

Answer

T1 = 149.2 N·m
16.Gears & gear trains

Answer: nr = 300 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 12 + 2·12 = 36

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −900·12/36 = −300 rpm
|nr| = 300 rpm

Answer

nr = 300 rpm

The ring turns opposite to the sun.

17.Springs & pendulums

Answer: v = −0.09052 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(180/2) = 9.487 rad/s
ω·t = 9.487·1.35 = 12.81 rad

Velocity

v = −A·ω·sin(ω·t) = −0.04·9.487·sin(12.81) = −0.09052 m/s

Answer

v = −0.09052 m/s
18.Springs & pendulums

Answer: vmax = 1.015 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 3·9.81/280 = 0.1051 m = A

Greatest speed

The speed is largest at equilibrium.

ω = √(280/3) = 9.661 rad/s
vmax = A·ω = 0.1051·9.661 = 1.015 m/s

Answer

vmax = 1.015 m/s
19.Mechanical vibrations

Answer: ζ = 0.1199

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(50/2.4) = 0.7591

Damping ratio

ζ = δ/√(4π² + δ²) = 0.7591/√(39.48 + 0.5763) = 0.1199

Answer

ζ = 0.1199
20.Mechanical vibrations

Answer: fn = 5.513 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 15 + 15 = 30 kN/m

Natural frequency

ωn = √(30000/25) = 34.64 rad/s
fn = 34.64/(2π) = 5.513 Hz

Answer

fn = 5.513 Hz

ExamProblems · examproblems.com/courses/dynamics