Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.4 s22.22

A driver moving at 80 km/h sees an obstacle. Her reaction time is 1.4 s, after which the car brakes with a constant deceleration of 4.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 80 km/htr = 1.4 sa = −4.5 m/s²
d = m
2.KinematicsHard
v₀ = 10 m/s25 m

A ball is thrown straight up at 10 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 10 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 30°a = ?m = 10 kg

A 10 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 10 kgθ = 30°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
8 kg3 kgTF = 105 Nμ = 0.25

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 105 N pulls the front 3 kg block; the 8 kg block is towed behind. The coefficient of kinetic friction is 0.25 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.

m1 = 8 kgm2 = 3 kgF = 105 Nμ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = ?40°R = 10 m

A ball is launched from level ground at 40° above the horizontal and lands 10 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 40°R = 10 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 15 mv0​ = 15 m/s55°v = ?

A ball is launched at 15 m/s and 55° above the horizontal from the top of a 15 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the speed v with which it hits the ground.

v₀ = 15 m/sθ = 55°h = 15 mg = 9.81 m/s²
v = m/s
7.Circular motionMedium
r = 75 mvmax​ = ?

A car takes a flat curve of radius 75 m. The coefficient of static friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 75 mμs = 0.8g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.3 mv = ?

A ball on a string 1.3 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1.3 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
20°L = 3 m2 kg

A 2 kg ball hangs on a light string of length 3 m. It is pulled aside until the string makes 20° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 2 kgL = 3 mθ = 20°g = 9.81 m/s²
T = N
10.Work & energyHard
F = 110 N35°μ = 0.158 kg

An 8 kg block starts from rest at the bottom of a 35° slope and is pulled up the slope by a constant force of 110 N parallel to the slope. The coefficient of kinetic friction is 0.15. Find the speed v of the block after it has moved 3 m up the slope.

m = 8 kgF = 110 Nθ = 35°μ = 0.15d = 3 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1.5 kg3 m/s1 kg

A 1.5 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 1 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 1.5 kgm2 = 1 kgv1 = 3 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
2 kgv = ?8 g30°L = 1.3 m

An 8 g bullet is fired horizontally into a 2 kg block hanging from light strings 1.3 m long, and stays in it. The strings swing out to a largest angle of 30° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 2 kgL = 1.3 mθ = 30°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
L = 1.1 mm = 6.5 kgα

A uniform slender rod of mass 6.5 kg and length 1.1 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 6.5 kgL = 1.1 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
θ = 10°vs = 7.5 m

A solid cylinder starts from rest and rolls without slipping down a slope inclined at 10° to the horizontal. Use g = 9.81 m/s². Its radius is 0.3 m. Find its angular velocity ω after it has rolled 7.5 m along the slope.

θ = 10°s = 7.5 mI = ½·m·r²g = 9.81 m/s²r = 0.3 m
ω = rad/s
15.Gears & gear trainsMedium
d1​ = 125 mmd2​ = 200 mm1500 rpmn2​ = ?

A 125 mm pulley at 1500 rpm drives a 200 mm pulley by a belt with 2.5 % slip. Find the speed n2 of the driven pulley.

n1 = 1500 rpmd1 = 125 mmd2 = 200 mms = 2.5 %
n2 = rpm
16.Gears & gear trainsHard
d1​ = 100 mmd2​ = 500 mm1450 rpmC = 1200 mmθ = ?

An open belt connects a 100 mm pulley and a 500 mm pulley whose centres are 1200 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 100 mmd2 = 500 mmC = 1200 mm
θ = °
17.Springs & pendulumsMedium
L = 0.2 m

A simple pendulum has a length of 0.2 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 0.2 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
mk = 290 N/mA = 11 cmx = 3 cm

A mass on a spring with k = 290 N/m oscillates on a frictionless surface with an amplitude of 11 cm. Find its kinetic energy K when it is 3 cm from equilibrium.

k = 290 N/mA = 11 cmx = 3 cm
K = J
19.Mechanical vibrationsMedium
k = 15 kN/mζ = 0.3m = 100 kg

A 100 kg mass on a spring with a stiffness of 15 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.

m = 100 kgk = 15 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
k1​ = 15k2​ = 30k3​ = 80m = 100 kg

A 100 kg mass hangs from spring k₃ = 80 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 15 kN/m and k₂ = 30 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 15 kN/mk2 = 30 kN/mk3 = 80 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 85.98 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 80/3.6 = 22.22 m/s

Reaction distance

d1 = v₀·tr = 22.22·1.4 = 31.11 m

Braking distance

d2 = v₀²/(2a) = 22.22²/(2·4.5) = 54.87 m

Total

d = 31.11 + 54.87 = 85.98 m

Answer

d = 85.98 m
2.Kinematics

Answer: t = 3.496 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−25 = 10·t − ½·9.81·t²
4.905·t² − 10·t − 25 = 0

Solve the quadratic

Only the positive root is physical.

t = (10 + √(10² + 2·9.81·25))/9.81 = 3.496 s

Answer

t = 3.496 s
3.Newton’s laws

Answer: a = 4.055 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.1·cos 30°) = 9.81·(0.5 − 0.0866) = 4.055 m/s²

Answer

a = 4.055 m/s²
4.Newton’s laws

Answer: a = 7.093 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (105 − 26.98)/11 = 7.093 m/s²

Answer

a = 7.093 m/s²
5.Projectile motion

Answer: v0 = 9.981 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·10/sin 80°) = 9.981 m/s

Answer

v0 = 9.981 m/s
6.Projectile motion

Answer: v = 22.79 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 15·cos 55° = 8.604 m/s
vy0 = 15·sin 55° = 12.29 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(12.29² + 2·9.81·15) = 21.1 m/s

Impact speed

v = √(8.604² + 21.1²) = 22.79 m/s

Answer

v = 22.79 m/s

Check with energy: v² = v₀² + 2gh.

7.Circular motion

Answer: vmax = 24.26 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.8·9.81·75) = 24.26 m/s

Answer

vmax = 24.26 m/s (87.34 km/h)
8.Circular motion

Answer: vmin = 3.571 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1.3) = 3.571 m/s

Answer

vmin = 3.571 m/s
9.Work & energy

Answer: T = 21.99 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·3·(1 − cos 20°) = 3.55 m²/s²

Forces at the bottom

m·g = 2·9.81 = 19.62 N
T = mg + mv²/L = 19.62 + 2·3.55/3 = 21.99 N

Answer

T = 21.99 N

Check: T = mg(3 − 2cos θ) = 21.99 N.

10.Work & energy

Answer: v = 6.443 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 8·9.81 = 78.48 N
mg·sin θ = 45.01 N
μ·mg·cos θ = 9.643 N

Work–energy

½mv² = (110 − 54.66)·3 = 166 J
v = √(2·166/8) = 6.443 m/s

Answer

v = 6.443 m/s
11.Momentum & collisions

Answer: v′1 = 0.6 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1.5 − 1)/(1.5 + 1)·3 = 0.6 m/s
v′2 = 2·1.5/(1.5 + 1)·3 = 3.6 m/s

Answer

v′1 = 0.6 m/s
12.Momentum & collisions

Answer: v = 464 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.3·(1 − cos 30°) = 0.1742 m

Speed after impact

V = √(2·9.81·0.1742) = 1.849 m/s

Collision

v = (m + M)·V/m = 2.008·1.849/0.008 = 464 m/s

Answer

v = 464 m/s
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·1.1) = 13.38 rad/s²

Acceleration of the free end

atip = α·L = 13.38·1.1 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: ω = 13.76 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 7.5·sin 10° = 1.302 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.5)
v = √(2·9.81·1.302/1.5) = 4.127 m/s
ω = v/r = 4.127/0.3 = 13.76 rad/s

Answer

ω = 13.76 rad/s
15.Gears & gear trains

Answer: n2 = 914.1 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1500·125/200 = 937.5 rpm

With slip

n2 = 937.5·0.975 = 914.1 rpm

Answer

n2 = 914.1 rpm
16.Gears & gear trains

Answer: θ = 160.8 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.1667) = 9.594°

Angle of wrap

θ = 180 − 2·9.594 = 160.8°

Answer

θ = 160.8°
17.Springs & pendulums

Answer: T = 0.8971 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(0.2/9.81) = 0.8971 s

Answer

T = 0.8971 s
18.Springs & pendulums

Answer: K = 1.624 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·290·0.11² = 1.754 J

Spring energy at x

U = ½·k·x² = ½·290·0.03² = 0.1305 J

Kinetic energy

K = 1.754 − 0.1305 = 1.624 J

Answer

K = 1.624 J
19.Mechanical vibrations

Answer: fd = 1.859 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(15000/100) = 12.25 rad/s
fn = 12.25/(2π) = 1.949 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 1.949·√(1 − 0.3²) = 1.859 Hz

Answer

fd = 1.859 Hz
20.Mechanical vibrations

Answer: fn = 2.701 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 15 + 30 = 45 kN/m
keq = 45·80/(45 + 80) = 28.8 kN/m

Natural frequency

ωn = √(28800/100) = 16.97 rad/s
fn = 16.97/(2π) = 2.701 Hz

Answer

fn = 2.701 Hz

ExamProblems · examproblems.com/courses/dynamics