In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane starts from rest and accelerates uniformly at 2.75 m/s² along a runway. Find its speed v after 2000 m.
v₀ = 0a = 2.75 m/s²s = 2000 m
v = m/s
2.KinematicsHard
A ball is thrown straight up at 7 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 7 m/sh₀ = 5 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 12 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 12 kgθ = 30°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 130 N pulls the front 2 kg block; the 6 kg block is towed behind. The coefficient of kinetic friction is 0.1 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 6 kgm2 = 2 kgF = 130 Nμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched from level ground at 55° above the horizontal and lands 20 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 55°R = 20 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is launched at 35° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 18 m/sθ = 35°h = 20 mg = 9.81 m/s²
t = s
7.Circular motionMedium
A curve of radius 150 m is banked at 12°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².
r = 150 mθ = 12°g = 9.81 m/s²
v = m/s
8.Circular motionHard
A ball on a string 0.5 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?
r = 0.5 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
A 10 kg block slides 20 m down a slope at 30° to the horizontal, with a coefficient of kinetic friction of 0.15. Find the work Wf done against friction.
m = 10 kgθ = 30°μ = 0.15d = 20 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
A 5 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1 m long (μ = 0.15) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 5 kgh = 5 mL = 1 mμ = 0.15k = 800 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
A 1700 kg car moving at 21 m/s runs into a stationary 1400 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?
m1 = 1700 kgv1 = 21 m/sm2 = 1400 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
A 1200 kg car runs into a parked 800 kg car. The wrecks lock together and skid 15 m before stopping. The coefficient of kinetic friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A 13 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 13 kg and radius 0.2 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the acceleration a of the block.
m = 13 kgM = 13 kgR = 0.2 mg = 9.81 m/s²
a = m/s²
14.Rigid-body rotationHard
A solid cylinder of mass 2 kg rolls without slipping at 5.5 m/s. Find its total kinetic energy Ek.
m = 2 kgv = 5.5 m/sI = ½·m·r²
Ek = J
15.Gears & gear trainsMedium
A 3 kW motor running at 1450 rpm drives a pinion with 16 teeth and a module of 5 mm. Find the tangential force Ft on the pinion teeth.
P = 3 kWn = 1450 rpmN1 = 16m = 5 mm
Ft = N
16.Gears & gear trainsHard
A 15 kW motor at 2900 rpm drives gear A (12 teeth), which meshes with gear B (32 teeth). Gear C (36 teeth) on the same shaft as B drives gear D (80 teeth) on the output shaft. Each gear mesh has an efficiency of 98%. Find the output torque Tout.
How long must a simple pendulum be to have a period of 1.9 s? Use g = 9.81 m/s². Find L.
T = 1.9 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
A mass on a spring with k = 470 N/m oscillates on a frictionless surface with an amplitude of 14 cm. Find its kinetic energy K when it is 7 cm from equilibrium.
k = 470 N/mA = 14 cmx = 7 cm
K = J
19.Mechanical vibrationsMedium
A 50 kg mass on a spring with a stiffness of 80 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.
m = 50 kgk = 80 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
A 20 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 80 kN/m and the lower one k₂ = 20 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.
m = 20 kgk1 = 80 kN/mk2 = 20 kN/m
keq = kN/m
3Solutions
1.Kinematics
Answer: v = 104.9 m/s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Speed after the distance
v = √(2·a·s) = √(2·2.75·2000) = 104.9 m/s
Answer
v = 104.9 m/s
(377.6 km/h)
2.Kinematics
Answer: t = 1.95 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−5 = 7·t − ½·9.81·t²
4.905·t² − 7·t − 5 = 0
Solve the quadratic
Only the positive root is physical.
t = (7 + √(7² + 2·9.81·5))/9.81 = 1.95 s
Answer
t = 1.95 s
3.Newton’s laws
Answer: a = 4.055 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: v0 = 14.45 m/s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·20/sin 110°) = 14.45 m/s
Answer
v0 = 14.45 m/s
6.Projectile motion
Answer: t = 3.33 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 18·cos 35° = 14.74 m/s
vy = v0·sin θ = 18·sin 35° = 10.32 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 20 + 10.32·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (10.32 + √(106.6 + 392.4))/9.81 = 3.33 s
Answer
t = 3.33 s
7.Circular motion
Answer: v = 17.69 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
v = √(r·g·tan θ) = √(150·9.81·tan 12°) = 17.69 m/s
Answer
v = 17.69 m/s
(63.67 km/h)
8.Circular motion
Answer: vmin = 2.215 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Tension zero at the top
m·g = m·v²/r → v = √(g·r) = √(9.81·0.5) = 2.215 m/s
Answer
vmin = 2.215 m/s
9.Work & energy
Answer: Wf = 254.9 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 98.1·0.866 = 84.96 N
F = μN = 0.15·84.96 = 12.74 N
Work against friction
Wf = F·d = 12.74·20 = 254.9 J
Answer
Wf = 254.9 J
10.Work & energy
Answer: v = 9.755 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 49.05·(5 − 0.15·1) = 237.9 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·4.85) = 9.755 m/s
Answer
v = 9.755 m/s
11.Momentum & collisions
Answer: ΔK/K = 45.16 %
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 1700·21/3100 = 11.52 m/s
Kinetic energy before and after
Kbefore = ½·1700·21² = 374850 J
Kafter = ½·3100·11.52² = 205563 J
Fraction lost
ΔK/K = 169287/374850 = 45.16 %
Answer
ΔK/K = 45.16 %
The lost energy goes into deformation, heat and sound.
12.Momentum & collisions
Answer: v1 = 23.92 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Torque on the pinion
ω = 2π·1450/60 = 151.8 rad/s
T = P/ω = 3000/151.8 = 19.76 N·m
Pitch diameter
d = m·N = 5·16 = 80 mm
Tangential force
Ft = 2T/d = 2·19.76/0.08 = 493.9 N
Answer
Ft = 493.9 N
16.Gears & gear trains
Answer: Tout = 281.1 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Output speed
nout = 2900·(12/32)·(36/80) = 489.4 rpm
ωout = 2π·489.4/60 = 51.25 rad/s
Output power and torque
Pout = 15000·0.98² = 14406 W
Tout = Pout/ωout = 14406/51.25 = 281.1 N·m
Answer
Tout = 281.1 N·m
17.Springs & pendulums
Answer: L = 0.897 m
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Solve for the length
L = g·(T/2π)² = 9.81·(1.9/2π)² = 0.897 m
Answer
L = 0.897 m
18.Springs & pendulums
Answer: K = 3.455 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Total energy
E = ½·k·A² = ½·470·0.14² = 4.606 J
Spring energy at x
U = ½·k·x² = ½·470·0.07² = 1.152 J
Kinetic energy
K = 4.606 − 1.152 = 3.455 J
Answer
K = 3.455 J
19.Mechanical vibrations
Answer: fd = 6.073 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(80000/50) = 40 rad/s
fn = 40/(2π) = 6.366 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 6.366·√(1 − 0.3²) = 6.073 Hz
Answer
fd = 6.073 Hz
20.Mechanical vibrations
Answer: keq = 16 kN/m
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.