Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)4.167 s25

A car driving at 90 km/h brakes with a constant deceleration of 6 m/s² until it stops. Find the braking distance s.

v₀ = 90 km/ha = −6 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 7 m/s10 m

A ball is thrown straight up at 7 m/s from the edge of a roof 10 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 7 m/sh₀ = 10 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 25°40 kgF = ?

A 40 kg box is pushed up a ramp at 25° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the pushing force F.

m = 40 kgθ = 25°μ = 0.15g = 9.81 m/s²
F = N
4.Newton’s lawsHard
m1​ = 6.5 kg1.5 kgno friction

A 6.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 1.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 6.5 kgm2 = 1.5 kgμ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 36 m/s65°rangeH = ?

A ball is launched at 65° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 36 m/sθ = 65°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 20 mv0​ = 17 m/s55°x = ?

A ball is launched at 55° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 17 m/sθ = 55°h = 20 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 115 m14 m/s

A 1600 kg car drives over the top of a hump in the road at 14 m/s. The top of the hump is a circular arc of radius 115 m. Use g = 9.81 m/s². Find the normal force N of the road on the car at the top.

m = 1600 kgv = 14 m/sr = 115 mg = 9.81 m/s²
N = N
8.Circular motionHard
r = 1.2 mv = ?

A ball on a string 1.2 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1.2 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
40 km/h

A car travelling at 40 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.4. Find the stopping distance d.

v = 40 km/hμ = 0.4g = 9.81 m/s²
d = m
10.Work & energyHard
F = 60 N15°μ = 0.2510 kg

A 10 kg block starts from rest at the bottom of a 15° slope and is pulled up the slope by a constant force of 60 N parallel to the slope. The coefficient of kinetic friction is 0.25. Find the speed v of the block after it has moved 6 m up the slope.

m = 10 kgF = 60 Nθ = 15°μ = 0.25d = 6 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
3 kg8 m/s4 kg

A 3 kg glider moving at 8 m/s makes a perfectly elastic head-on collision with a 4 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 3 kgm2 = 4 kgv1 = 8 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
14 m/s12 m/s

A 0.25 kg ball hits a wall at 14 m/s and bounces straight back at 12 m/s. The contact lasts 40 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.25 kgvin = 14 m/svout = 12 m/sΔt = 40 ms
J = N·s
13.Rigid-body rotationMedium
n = 1500 rpmTb​ = 80 N·mI = 12.5 kg·m²

A flywheel with a moment of inertia of 12.5 kg·m² spins at 1500 rpm. A brake applies a constant friction torque of 80 N·m. How many revolutions N does the flywheel make before it stops?

I = 12.5 kg·m²n = 1500 rpmTb = 80 N·m
N = rev
14.Rigid-body rotationHard
θ = 20°vs = 2 m

A solid sphere starts from rest and rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 2 m along the slope.

θ = 20°s = 2 mI = (2/5)·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
N1​ = 36N2​ = 80

A 15 kW motor running at 960 rpm drives a pinion with 36 teeth, which meshes with a gear with 80 teeth. The gear pair has an efficiency of 98%. Find the output torque T2 on the gear shaft.

P = 15 kWn1 = 960 rpmN1 = 36N2 = 80η = 98%
T2 = N·m
16.Gears & gear trainsHard
A = 50B = 72C = 16D = 18

In a compound gear train, gear A (50 teeth) on the input shaft turning at 960 rpm drives gear B (72 teeth). Gear C (16 teeth) is fixed to the same shaft as B and drives gear D (18 teeth) on the output shaft. Find the output speed nout.

nin = 960 rpmA = 50B = 72C = 16D = 18
nout = rpm
17.Springs & pendulumsMedium
2.2 kgk = 290 N/mA = 16 cmx = 13 cm

A 2.2 kg mass on a spring with k = 290 N/m oscillates on a frictionless surface with an amplitude of 16 cm. Find its speed v when it is 13 cm from equilibrium.

m = 2.2 kgk = 290 N/mA = 16 cmx = 13 cm
v = m/s
18.Springs & pendulumsHard
3.7 kgk = 320 N/mA = 3 cm

A 3.7 kg mass on a spring with k = 320 N/m is pulled 3 cm from equilibrium and released. Find its maximum acceleration amax.

m = 3.7 kgk = 320 N/mA = 3 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 4 kN/mc = 110 N·s/mm = 20 kg

A 20 kg mass is supported by a spring with a stiffness of 4 kN/m and a viscous damper with a damping coefficient of 110 N·s/m. Find the damping ratio ζ.

m = 20 kgk = 4 kN/mc = 110 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 15k2​ = 80m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 15 kN/m and the lower one k₂ = 80 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 5 kgk1 = 15 kN/mk2 = 80 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 52.08 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 90/3.6 = 25 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 25²/(2·6) = 52.08 m

Answer

s = 52.08 m
2.Kinematics

Answer: hmax = 12.5 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 7²/(2·9.81) = 2.497 m

Height above the ground

hmax = 10 + 2.497 = 12.5 m

Answer

hmax = 12.5 m
3.Newton’s laws

Answer: F = 219.2 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 165.8 + 53.35 = 219.2 N

Answer

F = 219.2 N
4.Newton’s laws

Answer: T = 11.96 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (14.71 − 0)/8 = 1.839 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 6.5·1.839 + 0 = 11.96 N

Answer

T = 11.96 N
5.Projectile motion

Answer: H = 54.26 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 36·cos 65° = 15.21 m/s
vy = v0·sin θ = 36·sin 65° = 32.63 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 32.63²/(2·9.81) = 54.26 m

Answer

H = 54.26 m
6.Projectile motion

Answer: x = 37.91 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 17·cos 55° = 9.751 m/s
vy = v0·sin θ = 17·sin 55° = 13.93 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 20 + 13.93·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (13.93 + √(193.9 + 392.4))/9.81 = 3.888 s

Horizontal distance

x = vx·t = 9.751·3.888 = 37.91 m

Answer

x = 37.91 m
7.Circular motion

Answer: N = 12969 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the top

Towards the centre (down) is positive.

m·g − N = m·v²/r
N = 1600·9.81 − 1600·14²/115 = 15696 − 2727 = 12969 N

Answer

N = 12969 N

The car feels lighter: the road pushes up less than its weight.

8.Circular motion

Answer: vmin = 3.431 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1.2) = 3.431 m/s

Answer

vmin = 3.431 m/s
9.Work & energy

Answer: d = 15.73 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 40/3.6 = 11.11 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 11.11²/(2·0.4·9.81) = 15.73 m

Answer

d = 15.73 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: v = 3.62 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 10·9.81 = 98.1 N
mg·sin θ = 25.39 N
μ·mg·cos θ = 23.69 N

Work–energy

½mv² = (60 − 49.08)·6 = 65.52 J
v = √(2·65.52/10) = 3.62 m/s

Answer

v = 3.62 m/s
11.Momentum & collisions

Answer: v′2 = 6.857 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (3 − 4)/(3 + 4)·8 = −1.143 m/s
v′2 = 2·3/(3 + 4)·8 = 6.857 m/s

Answer

v′2 = 6.857 m/s
12.Momentum & collisions

Answer: J = 6.5 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.25·(12 + 14) = 6.5 N·s

Answer

J = 6.5 N·s
13.Rigid-body rotation

Answer: N = 306.8 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1500/60 = 157.1 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·12.5·157.1² = 154213 J
θ = 154213/80 = 1928 rad

Revolutions

N = θ/2π = 306.8 rev

Answer

N = 306.8 rev
14.Rigid-body rotation

Answer: v = 3.096 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 2·sin 20° = 0.684 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.4)
v = √(2·9.81·0.684/1.4) = 3.096 m/s

Answer

v = 3.096 m/s
15.Gears & gear trains

Answer: T2 = 324.9 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 15000/100.5 = 149.2 N·m

Output torque

T2 = 149.2·80/36·0.98 = 324.9 N·m

Answer

T2 = 324.9 N·m
16.Gears & gear trains

Answer: nout = 592.6 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 960·50/72 = 666.7 rpm = nC

Second stage

nout = 666.7·16/18 = 592.6 rpm

Answer

nout = 592.6 rpm

total ratio = 1.62 : 1

17.Springs & pendulums

Answer: v = 1.071 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(290/2.2) = 11.48 rad/s

Speed at x

v = ω·√(A² − x²) = 11.48·√(0.16² − 0.13²) = 1.071 m/s

Answer

v = 1.071 m/s
18.Springs & pendulums

Answer: amax = 2.595 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(320/3.7) = 9.3 rad/s

Maximum acceleration

amax = A·ω² = 0.03·9.3² = 2.595 m/s²

Answer

amax = 2.595 m/s²
19.Mechanical vibrations

Answer: ζ = 0.1945

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(4000·20) = 565.7 N·s/m

Damping ratio

ζ = c/cc = 110/565.7 = 0.1945

Answer

ζ = 0.1945

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: keq = 12.63 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/15 + 1/80 → keq = 15·80/(15 + 80) = 12.63 kN/m

Answer

keq = 12.63 kN/m

ExamProblems · examproblems.com/courses/dynamics