Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 5 m/s²car23 m/s

A car speeding at a constant 23 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 5 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 23 m/sapolice = 5 m/s²v0,police = 0
d = m
2.KinematicsHard
v₀ = 18 m/s25 m

A ball is thrown straight up at 18 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 18 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
30 kg35°F = 170 Nμ = 0.1

A 30 kg sled is pulled across level snow by a rope at 35° above the horizontal with a force of 170 N. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 30 kgF = 170 Nθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 9.5 kg5.5 kgμ = 0.25

A 9.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5.5 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 9.5 kgm2 = 5.5 kgμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
56 my = ?v0​ = 40 m/s60°

A ball is kicked from level ground at 40 m/s and 60° above the horizontal towards a wall 56 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 40 m/sθ = 60°x = 56 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 50 mv0​ = 27 m/s50°x = ?

A ball is launched at 50° above horizontal from the top of a 50 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 27 m/sθ = 50°h = 50 mg = 9.81 m/s²
x = m
7.Circular motionMedium
L = 1.2 m25°

A small ball on a string of length 1.2 m moves in a horizontal circle so that the string makes a constant angle of 25° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.

L = 1.2 mθ = 25°g = 9.81 m/s²
T = s
8.Circular motionHard
R = 7 mh = 27.3 m

A 3 kg cart is released from rest at a height of 27.3 m on a frictionless track and runs through a vertical loop of radius 7 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 3 kgh = 27.3 mR = 7 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
25°d = 10 mμ = 0.1

A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.1. Find its speed v after it has slid 10 m along the slope.

θ = 25°μ = 0.1d = 10 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 7 mR = 2 mN = ?

A 2 kg cart is released from rest at a height of 7 m on a smooth track that leads into a vertical circular loop of radius 2 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 2 kgh = 7 mR = 2 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
0.5 kg11 m/s2.5 kg

A 0.5 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 0.5 kgm2 = 2.5 kgv1 = 11 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
5 kgv = ?10 g20°L = 1.2 m

A 10 g bullet is fired horizontally into a 5 kg block hanging from light strings 1.2 m long, and stays in it. The strings swing out to a largest angle of 20° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 10 gM = 5 kgL = 1.2 mθ = 20°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
L = 2.5 mm = 18.5 kgα

A uniform slender rod of mass 18.5 kg and length 2.5 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 18.5 kgL = 2.5 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
8.5 m/sω

A solid cylinder of mass 18.5 kg rolls without slipping at 8.5 m/s. Find its rotational kinetic energy Erot.

m = 18.5 kgv = 8.5 m/sI = ½·m·r²
Erot = J
15.Gears & gear trainsMedium
d1​ = 200 mmd2​ = 450 mm1440 rpmn2​ = ?

A 200 mm pulley at 1440 rpm drives a 450 mm pulley by a belt with 2 % slip. Find the speed n2 of the driven pulley.

n1 = 1440 rpmd1 = 200 mmd2 = 450 mms = 2 %
n2 = rpm
16.Gears & gear trainsHard
A = 12B = 24C = 24D = ?

In a compound gear train, gear A (12 teeth) on the input shaft turns at 3000 rpm and drives gear B (24 teeth). Gear C (24 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 500 rpm. How many teeth ND must gear D have?

nin = 3000 rpmA = 12B = 24C = 24nout = 500 rpm
ND =
17.Springs & pendulumsMedium
1 kgk = 250 N/mA = 5 cmx = 4 cm

A 1 kg mass on a spring with k = 250 N/m oscillates on a frictionless surface with an amplitude of 5 cm. Find its speed v when it is 4 cm from equilibrium.

m = 1 kgk = 250 N/mA = 5 cmx = 4 cm
v = m/s
18.Springs & pendulumsHard
3.7 kgk = 420 N/mA = 4 cm

A 3.7 kg mass on a spring with k = 420 N/m is pulled 4 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 3.7 kgk = 420 N/mA = 4 cm
E = J
19.Mechanical vibrationsMedium
tx10 mm5 cycles5.3 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 10 mm is followed 5 cycles later by a peak of 5.3 mm. Find the damping ratio ζ.

x0 = 10 mmx5 = 5.3 mmn = 5
ζ =
20.Mechanical vibrationsHard
k1​ = 25k2​ = 50m = 5 kg

A 5 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 25 kN/m and the lower one k₂ = 50 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 5 kgk1 = 25 kN/mk2 = 50 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: d = 211.6 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·23/5 = 9.2 s

Distance

d = v·t = 23·9.2 = 211.6 m

Answer

d = 211.6 m

At that moment the police car moves at 2v = 46 m/s.

2.Kinematics

Answer: t = 4.744 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−25 = 18·t − ½·9.81·t²
4.905·t² − 18·t − 25 = 0

Solve the quadratic

Only the positive root is physical.

t = (18 + √(18² + 2·9.81·25))/9.81 = 4.744 s

Answer

t = 4.744 s
3.Newton’s laws

Answer: a = 3.986 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 294.3 − 170·sin 35° = 196.8 N

Horizontal forces

m·a = F·cos θ − μ·N = 139.3 − 19.68
a = 119.6/30 = 3.986 m/s²

Answer

a = 3.986 m/s²
4.Newton’s laws

Answer: T = 42.71 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (53.96 − 23.3)/15 = 2.044 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 9.5·2.044 + 23.3 = 42.71 N

Answer

T = 42.71 N
5.Projectile motion

Answer: y = 58.54 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 40·cos 60° = 20 m/s
t = x/vx = 56/20 = 2.8 s

Height at that time

y = 34.64·2.8 − ½·9.81·2.8² = 58.54 m

Answer

y = 58.54 m

The ball is still rising at the wall.

6.Projectile motion

Answer: x = 103 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 27·cos 50° = 17.36 m/s
vy = v0·sin θ = 27·sin 50° = 20.68 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 50 + 20.68·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (20.68 + √(427.8 + 981))/9.81 = 5.934 s

Horizontal distance

x = vx·t = 17.36·5.934 = 103 m

Answer

x = 103 m
7.Circular motion

Answer: T = 2.092 s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 1.2·sin 25° = 0.5071 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.5071·9.81·tan 25°) = 1.523 m/s

Period

T = 2π·r/v = 2π·0.5071/1.523 = 2.092 s

Answer

T = 2.092 s
8.Circular motion

Answer: Nbottom = 259 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·27.3 = 535.6 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 3·535.6/7 + 29.43 = 259 N

Answer

Nbottom = 259 N
9.Work & energy

Answer: v = 8.071 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·10·(0.4226 − 0.1·0.9063)) = 8.071 m/s

Answer

v = 8.071 m/s
10.Work & energy

Answer: N = 39.24 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(7 − 4) = 58.86 m²/s²

Forces at the top

m·g = 2·9.81 = 19.62 N
N = mv²/R − mg = 2·58.86/2 − 19.62 = 39.24 N

Answer

N = 39.24 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′1 = −7.333 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (0.5 − 2.5)/(0.5 + 2.5)·11 = −7.333 m/s
v′2 = 2·0.5/(0.5 + 2.5)·11 = 3.667 m/s

Answer

v′1 = −7.333 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: v = 597 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.2·(1 − cos 20°) = 0.07237 m

Speed after impact

V = √(2·9.81·0.07237) = 1.192 m/s

Collision

v = (m + M)·V/m = 5.01·1.192/0.01 = 597 m/s

Answer

v = 597 m/s
13.Rigid-body rotation

Answer: R = 45.37 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.5) = 5.886 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 18.5·(9.81 − 7.357) = 45.37 N

Answer

R = 45.37 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: Erot = 334.2 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·18.5·8.5² = 668.3 J
Erot = ½·I·ω² = ½·0.5·m·r²·(v/r)² = 0.5·668.3 = 334.2 J

Answer

Erot = 334.2 J
15.Gears & gear trains

Answer: n2 = 627.2 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1440·200/450 = 640 rpm

With slip

n2 = 640·0.98 = 627.2 rpm

Answer

n2 = 627.2 rpm
16.Gears & gear trains

Answer: ND = 72

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 3000·12/24 = 1500 rpm

Teeth on gear D

ND = C·nC/nout = 24·1500/500 = 72

Answer

ND = 72
17.Springs & pendulums

Answer: v = 0.4743 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(250/1) = 15.81 rad/s

Speed at x

v = ω·√(A² − x²) = 15.81·√(0.05² − 0.04²) = 0.4743 m/s

Answer

v = 0.4743 m/s
18.Springs & pendulums

Answer: E = 0.336 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(420/3.7) = 10.65 rad/s

Energy

E = ½·k·A² = ½·420·0.04² = 0.336 J

Answer

E = 0.336 J
19.Mechanical vibrations

Answer: ζ = 0.0202

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(10/5.3) = 0.127

Damping ratio

ζ = δ/√(4π² + δ²) = 0.127/√(39.48 + 0.01612) = 0.0202

Answer

ζ = 0.0202
20.Mechanical vibrations

Answer: keq = 16.67 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/25 + 1/50 → keq = 25·50/(25 + 50) = 16.67 kN/m

Answer

keq = 16.67 kN/m

ExamProblems · examproblems.com/courses/dynamics