Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.086 s13.89

A car driving at 50 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. Find the braking distance s.

v₀ = 50 km/ha = −4.5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 16 m/s15 m

A ball is thrown straight up at 16 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 16 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 20°a = ?m = 2 kg

A 2 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 2 kgθ = 20°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 15°blockv₀ = 6 m/s

A block is given a push so that it starts sliding up a ramp at 15° with a speed of 6 m/s. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 6 m/sθ = 15°μ = 0.3g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 14 m/s65°rangeH = ?

A ball is launched at 65° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 14 m/sθ = 65°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 20 mv0​ = 33 m/s55°H = ?

A ball is launched at 33 m/s and 55° above the horizontal from the top of a 20 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 33 m/sθ = 55°h = 20 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 3.2 mω = ?

In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 3.2 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.7. Use g = 9.81 m/s². Find the smallest angular speed ω in rad/s.

r = 3.2 mμs = 0.7g = 9.81 m/s²
ω = rad/s
8.Circular motionHard
θ = 20°to centrevmin​ = ?

A curve of radius 50 m is banked at 20°, and the coefficient of static friction between tyres and road is 0.15. Use g = 9.81 m/s². Find the lowest speed vmin at which a car can take the curve without sliding down the bank.

r = 50 mθ = 20°μs = 0.15g = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
40°d = 14 mμ = 0.25

A 4 kg block slides 14 m down a slope at 40° to the horizontal, with a coefficient of kinetic friction of 0.25. Find the work Wf done against friction.

m = 4 kgθ = 40°μ = 0.25d = 14 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 5 mL = 4 mμ = 0.25k = 500 N/m

A 5 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.25) and then runs onto a spring (k = 500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 5 kgh = 5 mL = 4 mμ = 0.25k = 500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1 kg9 m/s2.5 kg

A 1 kg glider moving at 9 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 1 kgm2 = 2.5 kgv1 = 9 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
3.5 kgv = ?20 g10°L = 0.6 m

A 20 g bullet is fired horizontally into a 3.5 kg block hanging from light strings 0.6 m long, and stays in it. The strings swing out to a largest angle of 10° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 20 gM = 3.5 kgL = 0.6 mθ = 10°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
L = 0.7 mm = 2 kgα

A uniform slender rod of mass 2 kg and length 0.7 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find its angular acceleration α just after release.

m = 2 kgL = 0.7 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
θ = 15°as = 2 m

A solid cylinder rolls without slipping down a slope inclined at 15° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 2 m down the slope?

θ = 15°I = ½·m·r²g = 9.81 m/s²s = 2 m
t = s
15.Gears & gear trainsMedium
N1​ = 25N2​ = 72

A 1.5 kW motor running at 2900 rpm drives a pinion with 25 teeth, which meshes with a gear with 72 teeth. The gear pair has an efficiency of 95%. Find the output torque T2 on the gear shaft.

P = 1.5 kWn1 = 2900 rpmN1 = 25N2 = 72η = 95%
T2 = N·m
16.Gears & gear trainsHard
A = 18B = 45C = 32D = 72

A 5.5 kW motor at 2900 rpm drives gear A (18 teeth), which meshes with gear B (45 teeth). Gear C (32 teeth) on the same shaft as B drives gear D (72 teeth) on the output shaft. Each gear mesh has an efficiency of 96%. Find the output torque Tout.

P = 5.5 kWnin = 2900 rpmA = 18B = 45C = 32D = 72ηmesh = 96%
Tout = N·m
17.Springs & pendulumsMedium
L = 1.1 m

A simple pendulum has a length of 1.1 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 1.1 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
t (s)x (cm)t = ?4.5

A body oscillates in simple harmonic motion with period 0.7 s and amplitude 15 cm. What is the shortest time t it needs to move from its maximum displacement of 15 cm to a displacement of 4.5 cm?

T = 0.7 sA = 15 cmx = 4.5 cm
t = s
19.Mechanical vibrationsMedium
k = 50 kN/mc = 4240 N·s/mm = 250 kg

A 250 kg mass is supported by a spring with a stiffness of 50 kN/m and a viscous damper with a damping coefficient of 4240 N·s/m. Find the damping ratio ζ.

m = 250 kgk = 50 kN/mc = 4240 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 50k2​ = 5k3​ = 30m = 50 kg

A 50 kg mass hangs from spring k₃ = 30 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 50 kN/m and k₂ = 5 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 50 kN/mk2 = 5 kN/mk3 = 30 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 21.43 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 50/3.6 = 13.89 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 13.89²/(2·4.5) = 21.43 m

Answer

s = 21.43 m
2.Kinematics

Answer: t = 4.022 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−15 = 16·t − ½·9.81·t²
4.905·t² − 16·t − 15 = 0

Solve the quadratic

Only the positive root is physical.

t = (16 + √(16² + 2·9.81·15))/9.81 = 4.022 s

Answer

t = 4.022 s
3.Newton’s laws

Answer: a = 1.972 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0.15·cos 20°) = 9.81·(0.342 − 0.141) = 1.972 m/s²

Answer

a = 1.972 m/s²
4.Newton’s laws

Answer: d = 3.345 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 15° + 0.3·cos 15°) = 5.382 m/s²

Distance

d = v₀²/(2a) = 6²/(2·5.382) = 3.345 m

Answer

d = 3.345 m
5.Projectile motion

Answer: H = 8.206 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 14·cos 65° = 5.917 m/s
vy = v0·sin θ = 14·sin 65° = 12.69 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 12.69²/(2·9.81) = 8.206 m

Answer

H = 8.206 m
6.Projectile motion

Answer: H = 57.24 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 33·sin 55° = 27.03 m/s

Rise above the cliff

Δh = vy²/(2g) = 27.03²/(2·9.81) = 37.24 m

Height above the ground

H = 20 + 37.24 = 57.24 m

Answer

H = 57.24 m
7.Circular motion

Answer: ω = 2.093 rad/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces on a rider

N = m·ω²·r
μ·N = m·g → μ·ω²·r = g

Angular speed

ω = √(g/(μ·r)) = √(9.81/(0.7·3.2)) = 2.093 rad/s

Answer

ω = 2.093 rad/s
8.Circular motion

Answer: vmin = 9.976 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points up the slope.

N·(sin θ − μ·cos θ) = m·v²/r
N·(cos θ + μ·sin θ) = m·g

Speed

v = √(50·9.81·0.2011/0.991) = 9.976 m/s

Answer

vmin = 9.976 m/s
(35.91 km/h)
9.Work & energy

Answer: Wf = 105.2 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 39.24·0.766 = 30.06 N
F = μN = 0.25·30.06 = 7.515 N

Work against friction

Wf = F·d = 7.515·14 = 105.2 J

Answer

Wf = 105.2 J
10.Work & energy

Answer: x = 88.59 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 49.05·(5 − 0.25·4) = 196.2 J

Maximum compression

½kx² = 196.2 → x = √(2·196.2/500) = 0.8859 m = 88.59 cm

Answer

x = 88.59 cm
11.Momentum & collisions

Answer: v′1 = −3.857 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1 − 2.5)/(1 + 2.5)·9 = −3.857 m/s
v′2 = 2·1/(1 + 2.5)·9 = 5.143 m/s

Answer

v′1 = −3.857 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: v = 74.43 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 0.6·(1 − cos 10°) = 0.009115 m

Speed after impact

V = √(2·9.81·0.009115) = 0.4229 m/s

Collision

v = (m + M)·V/m = 3.52·0.4229/0.02 = 74.43 m/s

Answer

v = 74.43 m/s
13.Rigid-body rotation

Answer: α = 21.02 rad/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·0.7) = 21.02 rad/s²

Answer

α = 21.02 rad/s²
14.Rigid-body rotation

Answer: t = 1.537 s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.5·m·r²·(a/r) → f = 0.5·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 15°/1.5 = 1.693 m/s²

Time

s = ½·a·t² → t = √(2·2/1.693) = 1.537 s

Answer

t = 1.537 s
15.Gears & gear trains

Answer: T2 = 13.51 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·2900/60 = 303.7 rad/s
T1 = P/ω₁ = 1500/303.7 = 4.939 N·m

Output torque

T2 = 4.939·72/25·0.95 = 13.51 N·m

Answer

T2 = 13.51 N·m
16.Gears & gear trains

Answer: Tout = 93.89 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Output speed

nout = 2900·(18/45)·(32/72) = 515.6 rpm
ωout = 2π·515.6/60 = 53.99 rad/s

Output power and torque

Pout = 5500·0.96² = 5069 W
Tout = Pout/ωout = 5069/53.99 = 93.89 N·m

Answer

Tout = 93.89 N·m
17.Springs & pendulums

Answer: T = 2.104 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(1.1/9.81) = 2.104 s

Answer

T = 2.104 s
18.Springs & pendulums

Answer: t = 0.1411 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/0.7 = 8.976 rad/s

Solve for the time

0.3 = cos(ω·t) → ω·t = arccos(0.3) = 1.266 rad
t = 1.266/8.976 = 0.1411 s

Answer

t = 0.1411 s
19.Mechanical vibrations

Answer: ζ = 0.5996

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(50000·250) = 7071 N·s/m

Damping ratio

ζ = c/cc = 4240/7071 = 0.5996

Answer

ζ = 0.5996

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 3.136 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 50 + 5 = 55 kN/m
keq = 55·30/(55 + 30) = 19.41 kN/m

Natural frequency

ωn = √(19412/50) = 19.7 rad/s
fn = 19.7/(2π) = 3.136 Hz

Answer

fn = 3.136 Hz

ExamProblems · examproblems.com/courses/dynamics