Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?25

A car driving at 90 km/h brakes with a constant deceleration of 4 m/s² until it stops. How long does braking take? Find t.

v₀ = 90 km/ha = −4 m/s²v = 0
t = s
2.KinematicsHard
AB: 29 m/s40 m

Ball A is dropped from rest from a height of 40 m. At the same instant ball B is thrown straight up from the ground directly below at 29 m/s. Ignore air resistance and use g = 9.81 m/s². At what height y above the ground do they meet?

H = 40 mv0B = 29 m/sg = 9.81 m/s²
y = m
3.Newton’s lawsMedium
θ = 20°a = ?m = 17 kg

A 17 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 17 kgθ = 20°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 1 kg5 kgμ = 0.1

A 1 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 1 kgm2 = 5 kgμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 26 m/s25°rangeH = ?

A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 26 m/sθ = 25°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 10 mv0​ = 20 m/s20°x = ?

A ball is launched at 20° above horizontal from the top of a 10 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 20 m/sθ = 20°h = 10 mg = 9.81 m/s²
x = m
7.Circular motionMedium
θ = 10°to centrev = ?

A curve of radius 280 m is banked at 10°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².

r = 280 mθ = 10°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 0.8 mv = 9 m/s

A 2 kg ball on a string 0.8 m long is swung in a vertical circle. At the lowest point it moves at 9 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 2 kgr = 0.8 mv = 9 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
25°d = 12 mμ = 0.3

A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.3. Find its speed v after it has slid 12 m along the slope.

θ = 25°μ = 0.3d = 12 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
10 kg6 kgμ = 0.2d = 1 m

A 10 kg block rests on a rough horizontal table (μ = 0.2). A light string runs from it over a smooth pulley at the edge of the table to a hanging 6 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 1 m.

m1 = 10 kgm2 = 6 kgμ = 0.2d = 1 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
5 kgv = ?10 gh = 15 cm

A 10 g bullet is fired horizontally into a 5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 15 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 10 gM = 5 kgh = 15 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
21 m/s12 m/s

A 0.25 kg ball hits a wall at 21 m/s and bounces straight back at 12 m/s. The contact lasts 40 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.25 kgvin = 21 m/svout = 12 m/sΔt = 40 ms
J = N·s
13.Rigid-body rotationMedium
ω = ?1 kgL = 1.5 mm = 10 kg

A uniform slender rod of mass 10 kg and length 1.5 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 1 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 10 kgL = 1.5 mmball = 1 kgg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
340 m/s20 g0.95 mL = 2 m2 kgφ

A uniform slender rod of mass 2 kg and length 2 m hangs at rest from a frictionless pivot at its top end. A 20 g bullet moving horizontally at 340 m/s hits the rod 0.95 m below the pivot and stays embedded. Use g = 9.81 m/s². Find the largest angle φ from the vertical through which the rod swings.

M = 2 kgL = 2 mm = 20 gv = 340 m/sd = 0.95 mg = 9.81 m/s²
φ = °
15.Gears & gear trainsMedium
N1​ = 18N2​ = 50

An 11 kW motor running at 1440 rpm drives a pinion with 18 teeth, which meshes with a gear with 50 teeth. The gear pair has an efficiency of 96%. Find the torque T1 on the motor shaft.

P = 11 kWn1 = 1440 rpmN1 = 18N2 = 50η = 96%
T1 = N·m
16.Gears & gear trainsHard
d1​ = 160 mmd2​ = 450 mm1450 rpmC = 1000 mmT1​ = 600 NT2​P = ?

An open belt connects a 160 mm driving pulley at 1450 rpm to a 450 mm pulley; the centres are 1000 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 600 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 160 mmn1 = 1450 rpmd2 = 450 mmC = 1000 mmμ = 0.3T1 = 600 N
P = kW
17.Springs & pendulumsMedium
L = 3 m

A simple pendulum has a length of 3 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 3 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
t (s)x (cm)t = ?8.4

A body oscillates in simple harmonic motion with period 2.9 s and amplitude 14 cm. What is the shortest time t it needs to move from its maximum displacement of 14 cm to a displacement of 8.4 cm?

T = 2.9 sA = 14 cmx = 8.4 cm
t = s
19.Mechanical vibrationsMedium
tx10 mm5 cycles3.9 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 10 mm is followed 5 cycles later by a peak of 3.9 mm. Find the damping ratio ζ.

x0 = 10 mmx5 = 3.9 mmn = 5
ζ =
20.Mechanical vibrationsHard
k1​ = 80k2​ = 15m = 100 kg

A 100 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 80 kN/m and k₂ = 15 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 100 kgk1 = 80 kN/mk2 = 15 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: t = 6.25 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 90/3.6 = 25 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 25/4 = 6.25 s

Answer

t = 6.25 s
2.Kinematics

Answer: y = 30.67 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Meeting time

Up is positive, the ground is y = 0.

40 − ½g·t² = 29·t − ½g·t² → t = 40/29 = 1.379 s

Meeting height

y = 29·1.379 − ½·9.81·1.379² = 30.67 m

Answer

y = 30.67 m
3.Newton’s laws

Answer: a = 1.972 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0.15·cos 20°) = 9.81·(0.342 − 0.141) = 1.972 m/s²

Answer

a = 1.972 m/s²
4.Newton’s laws

Answer: a = 8.011 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (49.05 − 0.981)/6 = 8.011 m/s²

Answer

a = 8.011 m/s²
5.Projectile motion

Answer: H = 6.154 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 26·cos 25° = 23.56 m/s
vy = v0·sin θ = 26·sin 25° = 10.99 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 10.99²/(2·9.81) = 6.154 m

Answer

H = 6.154 m
6.Projectile motion

Answer: x = 42.97 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 20·cos 20° = 18.79 m/s
vy = v0·sin θ = 20·sin 20° = 6.84 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 10 + 6.84·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (6.84 + √(46.79 + 196.2))/9.81 = 2.286 s

Horizontal distance

x = vx·t = 18.79·2.286 = 42.97 m

Answer

x = 42.97 m
7.Circular motion

Answer: v = 22.01 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balance

N·cos θ = m·g, N·sin θ = m·v²/r → tan θ = v²/(r·g)

Speed

v = √(r·g·tan θ) = √(280·9.81·tan 10°) = 22.01 m/s

Answer

v = 22.01 m/s
(79.23 km/h)
8.Circular motion

Answer: T = 222.1 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 2·9.81 + 2·9²/0.8 = 19.62 + 202.5 = 222.1 N

Answer

T = 222.1 N
9.Work & energy

Answer: v = 5.957 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·12·(0.4226 − 0.3·0.9063)) = 5.957 m/s

Answer

v = 5.957 m/s
10.Work & energy

Answer: v = 2.215 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 58.86·1 = 58.86 J
μ·m₁g·d = 0.2·98.1·1 = 19.62 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 39.24 → v = √(2·39.24/16) = 2.215 m/s

Answer

v = 2.215 m/s
11.Momentum & collisions

Answer: v = 859.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.15) = 1.716 m/s

Collision

m·v = (m + M)·V → v = (0.01 + 5)·1.716/0.01 = 859.5 m/s

Answer

v = 859.5 m/s
12.Momentum & collisions

Answer: J = 8.25 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.25·(12 + 21) = 8.25 N·s

Answer

J = 8.25 N·s
13.Rigid-body rotation

Answer: ω = 4.256 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 10·9.81·0.75 + 1·9.81·1.5 = 88.29 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 7.5 + 2.25 = 9.75 kg·m²

Energy balance

½·IO·ω² = 88.29 → ω = √(2·88.29/9.75) = 4.256 rad/s

Answer

ω = 4.256 rad/s
14.Rigid-body rotation

Answer: φ = 52.58 °

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 2·2²/3 + 0.02·0.95² = 2.685 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.02·340·0.95/2.685 = 2.406 rad/s

Energy during the swing

½·I·ω² = ½·2.685·2.406² = 7.772 J
(M·g·L/2 + m·g·d)·(1 − cos φ) = 19.81·(1 − cos φ)
cos φ = 1 − 7.772/19.81 = 0.6076 → φ = 52.58°

Answer

φ = 52.58°
15.Gears & gear trains

Answer: T1 = 72.95 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 11000/150.8 = 72.95 N·m

Answer

T1 = 72.95 N·m
16.Gears & gear trains

Answer: P = 4.189 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.851 rad

Slack-side tension

eμθ = e0.8552 = 2.352, T₂ = 600/2.352 = 255.1 N

Power

P = (600 − 255.1)·12.15 = 4.189 kW

Answer

P = 4.189 kW
17.Springs & pendulums

Answer: T = 3.475 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(3/9.81) = 3.475 s

Answer

T = 3.475 s
18.Springs & pendulums

Answer: t = 0.428 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = 2π/T = 2π/2.9 = 2.167 rad/s

Solve for the time

0.6 = cos(ω·t) → ω·t = arccos(0.6) = 0.9273 rad
t = 0.9273/2.167 = 0.428 s

Answer

t = 0.428 s
19.Mechanical vibrations

Answer: ζ = 0.02996

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/5)·ln(10/3.9) = 0.1883

Damping ratio

ζ = δ/√(4π² + δ²) = 0.1883/√(39.48 + 0.03547) = 0.02996

Answer

ζ = 0.02996
20.Mechanical vibrations

Answer: keq = 95 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 80 + 15 = 95 kN/m

Answer

keq = 95 kN/m

ExamProblems · examproblems.com/courses/dynamics