Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.923 s12.5

A car driving at 45 km/h brakes with a constant deceleration of 6.5 m/s² until it stops. Find the braking distance s.

v₀ = 45 km/ha = −6.5 m/s²v = 0
s = m
2.KinematicsHard
t (s)v (m/s)4 s

A tram starts from rest and accelerates at 2.5 m/s² for 4 s, then runs at constant speed for 20 s, and finally brakes at 4 m/s² until it stops. Find the total distance s between the two stops.

a1 = 2.5 m/s²t1 = 4 st2 = 20 sa3 = −4 m/s²
s = m
3.Newton’s lawsMedium
θ = 25°a = ?m = 12 kg

A 12 kg block slides down a frictionless slope at 25° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 12 kgθ = 25°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 25°blockv₀ = 10.5 m/s

A block is given a push so that it starts sliding up a ramp at 25° with a speed of 10.5 m/s. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 10.5 m/sθ = 25°μ = 0.2g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = ?65°R = 140 m

A ball is launched from level ground at 65° above the horizontal and lands 140 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 65°R = 140 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 30 mv0​ = 20 m/s40°H = ?

A ball is launched at 20 m/s and 40° above the horizontal from the top of a 30 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 20 m/sθ = 40°h = 30 mg = 9.81 m/s²
H = m
7.Circular motionMedium
θ = ?to centre80 km/h

A road engineer wants cars to take a curve of radius 240 m at 80 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.

r = 240 mv = 80 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
r = 0.7 mv = 9 m/s

A 1.9 kg ball on a string 0.7 m long is swung in a vertical circle. At the lowest point it moves at 9 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.9 kgr = 0.7 mv = 9 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
0.5 kgk = 800 N/mh = ?

A toy launcher has a vertical spring of stiffness 800 N/m. A 0.5 kg ball is placed on it and the spring is compressed by 5 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.5 kgk = 800 N/mx = 5 cmg = 9.81 m/s²
h = m
10.Work & energyHard
h = 3 mL = 4 mμ = 0.15k = 1500 N/m

A 2.5 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.15) and then runs onto a spring (k = 1500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 2.5 kgh = 3 mL = 4 mμ = 0.15k = 1500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1 kg3 m/s0.5 kg

A 1 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 1 kgm2 = 0.5 kgv1 = 3 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
19 m/s15 m/s

A 0.6 kg ball hits a wall at 19 m/s and bounces straight back at 15 m/s. The contact lasts 10 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.6 kgvin = 19 m/svout = 15 m/sΔt = 10 ms
J = N·s
13.Rigid-body rotationMedium
L = 0.8 mm = 17.5 kgα

A uniform slender rod of mass 17.5 kg and length 0.8 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 17.5 kgL = 0.8 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
disc: 15 kgring: 18 kgn1​ = 1200 rpm

A uniform solid disc (mass 15 kg, radius 0.5 m) spins freely at 1200 rpm about a vertical frictionless shaft. A thin ring of mass 18 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. How much kinetic energy ΔE is lost in the process?

Mdisc = 15 kgMring = 18 kgR = 0.5 mn1 = 1200 rpm
ΔE = J
15.Gears & gear trainsMedium
N1​ = 45N2​ = 72

A 5.5 kW motor running at 960 rpm drives a pinion with 45 teeth, which meshes with a gear with 72 teeth. The gear pair has an efficiency of 96%. Find the output torque T2 on the gear shaft.

P = 5.5 kWn1 = 960 rpmN1 = 45N2 = 72η = 96%
T2 = N·m
16.Gears & gear trainsHard
d1​ = 80 mmd2​ = 250 mm1450 rpmC = 1000 mmθ = ?

An open belt connects an 80 mm pulley and a 250 mm pulley whose centres are 1000 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 80 mmd2 = 250 mmC = 1000 mm
θ = °
17.Springs & pendulumsMedium
L = 2.1 m

A simple pendulum has a length of 2.1 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.1 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
1.4 kgk = 410 N/mA = 11 cm

A 1.4 kg mass on a spring with k = 410 N/m is pulled 11 cm from equilibrium and released. Find its maximum acceleration amax.

m = 1.4 kgk = 410 N/mA = 11 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 1 kN/mc = 10 N·s/mm = 2 kg

A 2 kg mass is supported by a spring with a stiffness of 1 kN/m and a viscous damper with a damping coefficient of 10 N·s/m. Find the damping ratio ζ.

m = 2 kgk = 1 kN/mc = 10 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 5k2​ = 5m = 50 kg

A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 5 kN/m and k₂ = 5 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 5 kN/mk2 = 5 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 12.02 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·6.5) = 12.02 m

Answer

s = 12.02 m
2.Kinematics

Answer: s = 232.5 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 2.5·4 = 10 m/s

Distance of each phase

s1 = ½·2.5·4² = 20 m
s2 = 10·20 = 200 m
s3 = 10²/(2·4) = 12.5 m

Total distance

s = 20 + 200 + 12.5 = 232.5 m

Answer

s = 232.5 m
3.Newton’s laws

Answer: a = 4.146 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0·cos 25°) = 9.81·(0.4226 − 0) = 4.146 m/s²

Answer

a = 4.146 m/s²
4.Newton’s laws

Answer: d = 9.305 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 25° + 0.2·cos 25°) = 5.924 m/s²

Distance

d = v₀²/(2a) = 10.5²/(2·5.924) = 9.305 m

Answer

d = 9.305 m
5.Projectile motion

Answer: v0 = 42.34 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·140/sin 130°) = 42.34 m/s

Answer

v0 = 42.34 m/s
6.Projectile motion

Answer: H = 38.42 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 20·sin 40° = 12.86 m/s

Rise above the cliff

Δh = vy²/(2g) = 12.86²/(2·9.81) = 8.424 m

Height above the ground

H = 30 + 8.424 = 38.42 m

Answer

H = 38.42 m
7.Circular motion

Answer: θ = 11.85 °

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Units

v = 80/3.6 = 22.22 m/s

Banking angle

tan θ = v²/(r·g) = 22.22²/(240·9.81) = 0.2097
θ = 11.85°

Answer

θ = 11.85°
8.Circular motion

Answer: T = 238.5 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.9·9.81 + 1.9·9²/0.7 = 18.64 + 219.9 = 238.5 N

Answer

T = 238.5 N
9.Work & energy

Answer: h = 0.2039 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 5 cm = 0.05 m
½kx² = ½·800·0.05² = 1 J

Height

m·g = 0.5·9.81 = 4.905 N
h = ½kx²/(mg) = 1/4.905 = 0.2039 m

Answer

h = 0.2039 m
10.Work & energy

Answer: v = 6.862 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 24.53·(3 − 0.15·4) = 58.86 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·2.4) = 6.862 m/s

Answer

v = 6.862 m/s
11.Momentum & collisions

Answer: v′2 = 4 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1 − 0.5)/(1 + 0.5)·3 = 1 m/s
v′2 = 2·1/(1 + 0.5)·3 = 4 m/s

Answer

v′2 = 4 m/s
12.Momentum & collisions

Answer: J = 20.4 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.6·(15 + 19) = 20.4 N·s

Answer

J = 20.4 N·s
13.Rigid-body rotation

Answer: R = 42.92 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·0.8) = 18.39 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 17.5·(9.81 − 7.357) = 42.92 N

Answer

R = 42.92 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: ΔE = 10450 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = ½·15·0.5² = 1.875 kg·m²
I2 = 18·0.5² = 4.5 kg·m²

Conservation of angular momentum

n2 = n1·I1/(I1 + I2) = 1200·1.875/6.375 = 352.9 rpm

Kinetic energy before and after

E1 = ½·1.875·125.7² = 14804 J
E2 = ½·6.375·36.96² = 4354 J
ΔE = 14804 − 4354 = 10450 J

Answer

ΔE = 10450 J
15.Gears & gear trains

Answer: T2 = 84.03 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 5500/100.5 = 54.71 N·m

Output torque

T2 = 54.71·72/45·0.96 = 84.03 N·m

Answer

T2 = 84.03 N·m
16.Gears & gear trains

Answer: θ = 170.2 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.085) = 4.876°

Angle of wrap

θ = 180 − 2·4.876 = 170.2°

Answer

θ = 170.2°
17.Springs & pendulums

Answer: T = 2.907 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.1/9.81) = 2.907 s

Answer

T = 2.907 s
18.Springs & pendulums

Answer: amax = 32.21 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(410/1.4) = 17.11 rad/s

Maximum acceleration

amax = A·ω² = 0.11·17.11² = 32.21 m/s²

Answer

amax = 32.21 m/s²
19.Mechanical vibrations

Answer: ζ = 0.1118

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(1000·2) = 89.44 N·s/m

Damping ratio

ζ = c/cc = 10/89.44 = 0.1118

Answer

ζ = 0.1118

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 2.251 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 5 + 5 = 10 kN/m

Natural frequency

ωn = √(10000/50) = 14.14 rad/s
fn = 14.14/(2π) = 2.251 Hz

Answer

fn = 2.251 Hz

ExamProblems · examproblems.com/courses/dynamics