Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 3 m/s²car18 m/s

A car speeding at a constant 18 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 18 m/sapolice = 3 m/s²v0,police = 0
d = m
2.KinematicsHard
t (s)v (m/s)7 s

A tram starts from rest and accelerates at 2.5 m/s² for 7 s, then runs at constant speed for 9 s, and finally brakes at 5 m/s² until it stops. Find the total travel time t.

a1 = 2.5 m/s²t1 = 7 st2 = 9 sa3 = −5 m/s²
t = s
3.Newton’s lawsMedium
15 kg15°F = 100 Nμ = 0.3

A 15 kg sled is pulled across level snow by a rope at 15° above the horizontal with a force of 100 N. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 15 kgF = 100 Nθ = 15°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 6.5 kg4 kgno friction

A 6.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 6.5 kgm2 = 4 kgμ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
44 my = ?v0​ = 34 m/s35°

A ball is kicked from level ground at 34 m/s and 35° above the horizontal towards a wall 44 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 34 m/sθ = 35°x = 44 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 55 mv0​ = 33 m/s55°x = ?

A ball is launched at 55° above horizontal from the top of a 55 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 33 m/sθ = 55°h = 55 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 110 mvmax​ = ?

A car takes a flat curve of radius 110 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 110 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 1.2 mv = ?

A ball on a string 1.2 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 1.2 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
40°d = 5 mμ = 0.3

A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.3. Find its speed v after it has slid 5 m along the slope.

θ = 40°μ = 0.3d = 5 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 2.5 mL = 2.5 mμ = 0.15k = 500 N/m

A 5 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.15) and then runs onto a spring (k = 500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 5 kgh = 2.5 mL = 2.5 mμ = 0.15k = 500 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1900 kg19 m/s1500 kg

A 1900 kg car moving at 19 m/s runs into a stationary 1500 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 1900 kgv1 = 19 m/sm2 = 1500 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
20 m/s4 m/s

A 0.25 kg ball hits a wall at 20 m/s and bounces straight back at 4 m/s. The contact lasts 40 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.25 kgvin = 20 m/svout = 4 m/sΔt = 40 ms
J = N·s
13.Rigid-body rotationMedium
n = 1500 rpmTb​ = 135 N·mI = 1.5 kg·m²

A flywheel with a moment of inertia of 1.5 kg·m² spins at 1500 rpm. A brake applies a constant friction torque of 135 N·m. How long t does it take to stop?

I = 1.5 kg·m²n = 1500 rpmTb = 135 N·m
t = s
14.Rigid-body rotationHard
θ = 20°as = 9 m

A solid sphere rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 9 m down the slope?

θ = 20°I = (2/5)·m·r²g = 9.81 m/s²s = 9 m
t = s
15.Gears & gear trainsMedium
d1​ = 150 mmd2​ = 200 mm2880 rpmT1​ = 1500 NT2​ = 750 NP = ?

A belt runs on a 150 mm driving pulley at 2880 rpm. The tension is 1500 N on the tight side and 750 N on the slack side. Find the power P transmitted, in kW.

d1 = 150 mmn1 = 2880 rpmT1 = 1500 NT2 = 750 N
P = kW
16.Gears & gear trainsHard
d1​ = 150 mmd2​ = 500 mm960 rpmC = 600 mmT1​ = 500 NT2​P = ?

An open belt connects a 150 mm driving pulley at 960 rpm to a 500 mm pulley; the centres are 600 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 500 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 150 mmn1 = 960 rpmd2 = 500 mmC = 600 mmμ = 0.25T1 = 500 N
P = kW
17.Springs & pendulumsMedium
0.5 kgk = 220 N/mA = 4 cmx = 3 cm

A 0.5 kg mass on a spring with k = 220 N/m oscillates on a frictionless surface with an amplitude of 4 cm. Find its speed v when it is 3 cm from equilibrium.

m = 0.5 kgk = 220 N/mA = 4 cmx = 3 cm
v = m/s
18.Springs & pendulumsHard
2.3 kgk = 120 N/m

A 2.3 kg mass is attached to the lower end of an unstretched vertical spring with k = 120 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.

m = 2.3 kgk = 120 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
k = 8 kN/mζ = 0.4m = 5 kg

A 5 kg mass on a spring with a stiffness of 8 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 5 kgk = 8 kN/mζ = 0.4
fd = Hz
20.Mechanical vibrationsHard
k1​ = 50k2​ = 10k3​ = 12m = 50 kg

A 50 kg mass hangs from spring k₃ = 12 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 50 kN/m and k₂ = 10 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 50 kN/mk2 = 10 kN/mk3 = 12 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: d = 216 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·18/3 = 12 s

Distance

d = v·t = 18·12 = 216 m

Answer

d = 216 m

At that moment the police car moves at 2v = 36 m/s.

2.Kinematics

Answer: t = 19.5 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 2.5·7 = 17.5 m/s

Braking time

t3 = v/a3 = 17.5/5 = 3.5 s

Total time

t = 7 + 9 + 3.5 = 19.5 s

Answer

t = 19.5 s
3.Newton’s laws

Answer: a = 4.014 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 147.2 − 100·sin 15° = 121.3 N

Horizontal forces

m·a = F·cos θ − μ·N = 96.59 − 36.38
a = 60.21/15 = 4.014 m/s²

Answer

a = 4.014 m/s²
4.Newton’s laws

Answer: T = 24.29 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (39.24 − 0)/10.5 = 3.737 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 6.5·3.737 + 0 = 24.29 N

Answer

T = 24.29 N
5.Projectile motion

Answer: y = 18.57 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 34·cos 35° = 27.85 m/s
t = x/vx = 44/27.85 = 1.58 s

Height at that time

y = 19.5·1.58 − ½·9.81·1.58² = 18.57 m

Answer

y = 18.57 m

The ball is still rising at the wall.

6.Projectile motion

Answer: x = 134.2 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 33·cos 55° = 18.93 m/s
vy = v0·sin θ = 33·sin 55° = 27.03 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 55 + 27.03·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (27.03 + √(730.7 + 1079))/9.81 = 7.092 s

Horizontal distance

x = vx·t = 18.93·7.092 = 134.2 m

Answer

x = 134.2 m
7.Circular motion

Answer: vmax = 23.23 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·110) = 23.23 m/s

Answer

vmax = 23.23 m/s (83.62 km/h)
8.Circular motion

Answer: vmin = 3.431 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·1.2) = 3.431 m/s

Answer

vmin = 3.431 m/s
9.Work & energy

Answer: v = 6.365 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·5·(0.6428 − 0.3·0.766)) = 6.365 m/s

Answer

v = 6.365 m/s
10.Work & energy

Answer: x = 64.57 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 49.05·(2.5 − 0.15·2.5) = 104.2 J

Maximum compression

½kx² = 104.2 → x = √(2·104.2/500) = 0.6457 m = 64.57 cm

Answer

x = 64.57 cm
11.Momentum & collisions

Answer: ΔK = 151301 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1900·19/3400 = 10.62 m/s

Kinetic energy before and after

Kbefore = ½·1900·19² = 342950 J
Kafter = ½·3400·10.62² = 191649 J

Energy lost

ΔK = 342950 − 191649 = 151301 J

Answer

ΔK = 151301 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: J = 6 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.25·(4 + 20) = 6 N·s

Answer

J = 6 N·s
13.Rigid-body rotation

Answer: t = 1.745 s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1500/60 = 157.1 rad/s

Deceleration and time

α = Tb/I = 135/1.5 = 90 rad/s²
t = ω/α = 157.1/90 = 1.745 s

Answer

t = 1.745 s
14.Rigid-body rotation

Answer: t = 2.741 s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.4·m·r²·(a/r) → f = 0.4·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 20°/1.4 = 2.397 m/s²

Time

s = ½·a·t² → t = √(2·9/2.397) = 2.741 s

Answer

t = 2.741 s
15.Gears & gear trains

Answer: P = 16.96 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 22.62 m/s

Power

P = (1500 − 750)·22.62 = 16965 W = 16.96 kW

Answer

P = 16.96 kW
16.Gears & gear trains

Answer: P = 1.777 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.55 rad

Slack-side tension

eμθ = e0.6374 = 1.892, T₂ = 500/1.892 = 264.3 N

Power

P = (500 − 264.3)·7.54 = 1.777 kW

Answer

P = 1.777 kW
17.Springs & pendulums

Answer: v = 0.555 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(220/0.5) = 20.98 rad/s

Speed at x

v = ω·√(A² − x²) = 20.98·√(0.04² − 0.03²) = 0.555 m/s

Answer

v = 0.555 m/s
18.Springs & pendulums

Answer: xmax = 37.6 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 2.3·9.81/120 = 0.188 m = A

Lowest point

xmax = 2A = 0.376 m = 37.6 cm

Answer

xmax = 37.6 cm
19.Mechanical vibrations

Answer: fd = 5.835 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(8000/5) = 40 rad/s
fn = 40/(2π) = 6.366 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 6.366·√(1 − 0.4²) = 5.835 Hz

Answer

fd = 5.835 Hz
20.Mechanical vibrations

Answer: fn = 2.251 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 50 + 10 = 60 kN/m
keq = 60·12/(60 + 12) = 10 kN/m

Natural frequency

ωn = √(10000/50) = 14.14 rad/s
fn = 14.14/(2π) = 2.251 Hz

Answer

fn = 2.251 Hz

ExamProblems · examproblems.com/courses/dynamics