Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.923 s12.5

A car driving at 45 km/h brakes with a constant deceleration of 6.5 m/s² until it stops. Find the braking distance s.

v₀ = 45 km/ha = −6.5 m/s²v = 0
s = m
2.KinematicsHard
t (s)v (m/s)7 s

A tram starts from rest and accelerates at 2.5 m/s² for 7 s, then runs at constant speed for 27 s, and finally brakes at 2.5 m/s² until it stops. Find the total travel time t.

a1 = 2.5 m/s²t1 = 7 st2 = 27 sa3 = −2.5 m/s²
t = s
3.Newton’s lawsMedium
θ = 40°a = ?m = 14 kg

A 14 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 14 kgθ = 40°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 8.5 kg3 kgμ = 0.1

An 8.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 8.5 kgm2 = 3 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 30 m/s25°x = ?

A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 30 m/sθ = 25°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 40 mv0​ = 26 m/s40°range

A ball is launched at 40° above horizontal from the top of a 40 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 26 m/sθ = 40°h = 40 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 30 mvmax​ = ?

A car takes a flat curve of radius 30 m. The coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 30 mμs = 0.4g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.5 m7 m/svtop​ = ?

A 0.4 kg ball on a light string 0.5 m long is swung in a vertical circle. At the lowest point its speed is 7 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 0.4 kgr = 0.5 mvbottom = 7 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
45°d = 15 mμ = 0.2

A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.2. Find its speed v after it has slid 15 m along the slope.

θ = 45°μ = 0.2d = 15 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 3.5 mL = 3.5 mμ = 0.1k = 1000 N/m

A 2 kg block is released from rest at height 3.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.1) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 2 kgh = 3.5 mL = 3.5 mμ = 0.1k = 1000 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
18 kg61 m/s1 kgv′2​ = ?

A 19 kg projectile moving horizontally at 15 m/s explodes into two fragments that move along the same line. The 18 kg fragment continues forwards at 61 m/s. Find the velocity v′2 of the 1 kg fragment (positive in the original direction).

M = 19 kgu = 15 m/sm1 = 18 kgv′1 = 61 m/sm2 = 1 kg
v′2 = m/s
12.Momentum & collisionsHard
900 kg17 m/s1500 kg23 m/sθ = ?

At a crossing a 900 kg car travelling east at 17 m/s collides with a 1500 kg car travelling north at 23 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 900 kgv1 = 17 m/s (E)m2 = 1500 kgv2 = 23 m/s (N)
θ = °
13.Rigid-body rotationMedium
n = 800 rpmTb​ = 125 N·mI = 24 kg·m²

A flywheel with a moment of inertia of 24 kg·m² spins at 800 rpm. A brake applies a constant friction torque of 125 N·m. How many revolutions N does the flywheel make before it stops?

I = 24 kg·m²n = 800 rpmTb = 125 N·m
N = rev
14.Rigid-body rotationHard
disc: 4 kgring: 19 kgn1​ = 450 rpm

A uniform solid disc (mass 4 kg, radius 0.1 m) spins freely at 450 rpm about a vertical frictionless shaft. A thin ring of mass 19 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. Find their common speed n2 in rpm.

Mdisc = 4 kgMring = 19 kgR = 0.1 mn1 = 450 rpm
n2 = rpm
15.Gears & gear trainsMedium
N1​ = 25, m = 5 mm

A 2.2 kW motor running at 960 rpm drives a pinion with 25 teeth and a module of 5 mm. Find the tangential force Ft on the pinion teeth.

P = 2.2 kWn = 960 rpmN1 = 25m = 5 mm
Ft = N
16.Gears & gear trainsHard
d1​ = 150 mmd2​ = 200 mm2880 rpmC = 800 mmθ = ?

An open belt connects a 150 mm pulley and a 200 mm pulley whose centres are 800 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 150 mmd2 = 200 mmC = 800 mm
θ = °
17.Springs & pendulumsMedium
L = 0.6 m

A simple pendulum has a length of 0.6 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 0.6 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
mk = 430 N/mA = 14 cmx = 11 cm

A mass on a spring with k = 430 N/m oscillates on a frictionless surface with an amplitude of 14 cm. Find its kinetic energy K when it is 11 cm from equilibrium.

k = 430 N/mA = 14 cmx = 11 cm
K = J
19.Mechanical vibrationsMedium
k = 25 kN/mζ = 0.35m = 150 kg

A 150 kg mass on a spring with a stiffness of 25 kN/m has a viscous damper giving a damping ratio of 0.35. Find the damped natural frequency fd of its free vibration in Hz.

m = 150 kgk = 25 kN/mζ = 0.35
fd = Hz
20.Mechanical vibrationsHard
k1​ = 20k2​ = 25m = 10 kg

A 10 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 20 kN/m and k₂ = 25 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 10 kgk1 = 20 kN/mk2 = 25 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 12.02 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·6.5) = 12.02 m

Answer

s = 12.02 m
2.Kinematics

Answer: t = 41 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 2.5·7 = 17.5 m/s

Braking time

t3 = v/a3 = 17.5/2.5 = 7 s

Total time

t = 7 + 27 + 7 = 41 s

Answer

t = 41 s
3.Newton’s laws

Answer: a = 4.051 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.3·cos 40°) = 9.81·(0.6428 − 0.2298) = 4.051 m/s²

Answer

a = 4.051 m/s²
4.Newton’s laws

Answer: T = 23.93 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (29.43 − 8.339)/11.5 = 1.834 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 8.5·1.834 + 8.339 = 23.93 N

Answer

T = 23.93 N
5.Projectile motion

Answer: x = 70.28 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 30·cos 25° = 27.19 m/s
vy = v0·sin θ = 30·sin 25° = 12.68 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·12.68/9.81 = 2.585 s

Horizontal distance

x = vx·t = 27.19·2.585 = 70.28 m

Answer

x = 70.28 m
6.Projectile motion

Answer: t = 5.029 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 26·cos 40° = 19.92 m/s
vy = v0·sin θ = 26·sin 40° = 16.71 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 40 + 16.71·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (16.71 + √(279.3 + 784.8))/9.81 = 5.029 s

Answer

t = 5.029 s
7.Circular motion

Answer: vmax = 10.85 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.4·9.81·30) = 10.85 m/s

Answer

vmax = 10.85 m/s (39.06 km/h)
8.Circular motion

Answer: Ttop = 19.58 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 7² − 4·9.81·0.5 = 29.38 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 0.4·29.38/0.5 − 0.4·9.81 = 19.58 N

Answer

Ttop = 19.58 N
9.Work & energy

Answer: v = 12.9 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·15·(0.7071 − 0.2·0.7071)) = 12.9 m/s

Answer

v = 12.9 m/s
10.Work & energy

Answer: v = 7.861 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 19.62·(3.5 − 0.1·3.5) = 61.8 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.15) = 7.861 m/s

Answer

v = 7.861 m/s
11.Momentum & collisions

Answer: v′2 = −813 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 19·15 = 285 kg·m/s

Momentum after

285 = 18·61 + 1·v′2
v′2 = (285 − 1098)/1 = −813 m/s

Answer

v′2 = −813 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: θ = 66.08 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 900·17 = 15300 kg·m/s
py = 1500·23 = 34500 kg·m/s

Direction

tan θ = py/px = 2.255 → θ = 66.08°

Answer

θ = 66.08°
13.Rigid-body rotation

Answer: N = 107.2 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·800/60 = 83.78 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·24·83.78² = 84221 J
θ = 84221/125 = 673.8 rad

Revolutions

N = θ/2π = 107.2 rev

Answer

N = 107.2 rev
14.Rigid-body rotation

Answer: n2 = 42.86 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = ½·4·0.1² = 0.02 kg·m²
I2 = 19·0.1² = 0.19 kg·m²

Conservation of angular momentum

n2 = n1·I1/(I1 + I2) = 450·0.02/0.21 = 42.86 rpm

Answer

n2 = 42.86 rpm
15.Gears & gear trains

Answer: Ft = 350.1 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·960/60 = 100.5 rad/s
T = P/ω = 2200/100.5 = 21.88 N·m

Pitch diameter

d = m·N = 5·25 = 125 mm

Tangential force

Ft = 2T/d = 2·21.88/0.125 = 350.1 N

Answer

Ft = 350.1 N
16.Gears & gear trains

Answer: θ = 176.4 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.03125) = 1.791°

Angle of wrap

θ = 180 − 2·1.791 = 176.4°

Answer

θ = 176.4°
17.Springs & pendulums

Answer: T = 1.554 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(0.6/9.81) = 1.554 s

Answer

T = 1.554 s
18.Springs & pendulums

Answer: K = 1.613 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Total energy

E = ½·k·A² = ½·430·0.14² = 4.214 J

Spring energy at x

U = ½·k·x² = ½·430·0.11² = 2.601 J

Kinetic energy

K = 4.214 − 2.601 = 1.613 J

Answer

K = 1.613 J
19.Mechanical vibrations

Answer: fd = 1.925 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(25000/150) = 12.91 rad/s
fn = 12.91/(2π) = 2.055 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 2.055·√(1 − 0.35²) = 1.925 Hz

Answer

fd = 1.925 Hz
20.Mechanical vibrations

Answer: keq = 45 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 20 + 25 = 45 kN/m

Answer

keq = 45 kN/m

ExamProblems · examproblems.com/courses/dynamics