Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?15

A car driving at 54 km/h brakes with a constant deceleration of 7.5 m/s² until it stops. How long does braking take? Find t.

v₀ = 54 km/ha = −7.5 m/s²v = 0
t = s
2.KinematicsHard
a = 24 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 24 m/s² for 1.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 24 m/s²t1 = 1.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 40°a = ?m = 8 kg

An 8 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 8 kgθ = 40°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 9.5 kg10 kgθ = 20°

A 9.5 kg block on a ramp at 20° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 10 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.15. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 9.5 kgm2 = 10 kgθ = 20°μ = 0.15g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 18 m/s60°rangeH = ?

A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 18 m/sθ = 60°g = 9.81 m/s²
H = m
6.Projectile motionHard
14 mv0​ = 35 m/s35°x = ?

A ball is thrown from ground level at 35 m/s and 35° above the horizontal. It lands on the flat roof of a building 14 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 35 m/sθ = 35°hroof = 14 mg = 9.81 m/s²
x = m
7.Circular motionMedium
L = 1.2 m30°

A small ball on a string of length 1.2 m moves in a horizontal circle so that the string makes a constant angle of 30° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.

L = 1.2 mθ = 30°g = 9.81 m/s²
T = s
8.Circular motionHard
R = 10 mh = ?

A small cart is released from rest on a frictionless track and runs into a vertical loop of radius 10 m. From what minimum height hmin above the bottom of the loop must it start to stay on the track at the top of the loop?

R = 10 mv₀ = 0
hmin = m
9.Work & energyMedium
60 km/h

A car travelling at 60 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.8. Find the stopping distance d.

v = 60 km/hμ = 0.8g = 9.81 m/s²
d = m
10.Work & energyHard
F = 105 N35°μ = 0.110 kg

A 10 kg block starts from rest at the bottom of a 35° slope and is pulled up the slope by a constant force of 105 N parallel to the slope. The coefficient of kinetic friction is 0.1. Find the speed v of the block after it has moved 5 m up the slope.

m = 10 kgF = 105 Nθ = 35°μ = 0.1d = 5 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
2 kgv = ?12 gh = 22 cm

A 12 g bullet is fired horizontally into a 2 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 22 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 12 gM = 2 kgh = 22 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
1900 kgv1​ = ?1500 kg

A 1900 kg car runs into a parked 1500 kg car. The wrecks lock together and skid 6 m before stopping. The coefficient of kinetic friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1900 kgm2 = 1500 kgd = 6 mμ = 0.6g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
n = 1600 rpmT = 690 N·m

A motor delivers a torque of 690 N·m at 1600 rpm. Find its power output P in kW.

T = 690 N·mn = 1600 rpm
P = kW
14.Rigid-body rotationHard
7.5 m/sω

A hollow sphere of mass 9.5 kg rolls without slipping at 7.5 m/s. Find its rotational kinetic energy Erot.

m = 9.5 kgv = 7.5 m/sI = (2/3)·m·r²
Erot = J
15.Gears & gear trainsMedium
d1​ = 120 mmd2​ = 400 mm1450 rpmn2​ = ?

A 120 mm pulley at 1450 rpm drives a 400 mm pulley by a belt with 1 % slip. Find the speed n2 of the driven pulley.

n1 = 1450 rpmd1 = 120 mmd2 = 400 mms = 1 %
n2 = rpm
16.Gears & gear trainsHard
d1​ = 150 mmd2​ = 200 mm720 rpmC = 500 mmT1​ = 1200 NT2​P = ?

An open belt connects a 150 mm driving pulley at 720 rpm to a 200 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 1200 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 150 mmn1 = 720 rpmd2 = 200 mmC = 500 mmμ = 0.3T1 = 1200 N
P = kW
17.Springs & pendulumsMedium
L = 1.6 mT = 2.67 s

An astronaut on another planet finds that a simple pendulum 1.6 m long has a period of 2.67 s for small swings. Find the gravitational acceleration g on that planet.

L = 1.6 mT = 2.67 s
g = m/s²
18.Springs & pendulumsHard
2.1 kgk = 340 N/mA = 12 cm

A 2.1 kg mass on a spring with k = 340 N/m is pulled 12 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 2.1 kgk = 340 N/mA = 12 cm
E = J
19.Mechanical vibrationsMedium
tx15 mm2 cycles8 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 15 mm is followed 2 cycles later by a peak of 8 mm. Find the damping ratio ζ.

x0 = 15 mmx2 = 8 mmn = 2
ζ =
20.Mechanical vibrationsHard
k1​ = 15k2​ = 25k3​ = 40m = 20 kg

A 20 kg mass hangs from spring k₃ = 40 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 15 kN/m and k₂ = 25 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 20 kgk1 = 15 kN/mk2 = 25 kN/mk3 = 40 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 2 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 54/3.6 = 15 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 15/7.5 = 2 s

Answer

t = 2 s
2.Kinematics

Answer: hmax = 93.06 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 24·1.5 = 36 m/s
h₁ = ½·24·1.5² = 27 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 36²/(2·9.81) = 66.06 m
hmax = 27 + 66.06 = 93.06 m

Answer

hmax = 93.06 m
3.Newton’s laws

Answer: a = 4.803 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.2·cos 40°) = 9.81·(0.6428 − 0.1532) = 4.803 m/s²

Answer

a = 4.803 m/s²
4.Newton’s laws

Answer: a = 2.723 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 98.1 N
m₁·g·sin θ = 31.87 N
μ·m₁·g·cos θ = 13.14 N

Acceleration of the system

a = (98.1 − 31.87 − 13.14)/19.5 = 2.723 m/s²

Answer

a = 2.723 m/s²
5.Projectile motion

Answer: H = 12.39 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 60° = 9 m/s
vy = v0·sin θ = 18·sin 60° = 15.59 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 15.59²/(2·9.81) = 12.39 m

Answer

H = 12.39 m
6.Projectile motion

Answer: x = 91.78 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 28.67 m/s, vy = 20.08 m/s

Time to land on the roof

Larger root: the ball is descending.

14 = 20.08·t − 4.905·t²
t = (20.08 + √(20.08² − 2·9.81·14))/9.81 = 3.201 s

Horizontal distance

x = vx·t = 28.67·3.201 = 91.78 m

Answer

x = 91.78 m
7.Circular motion

Answer: T = 2.045 s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 1.2·sin 30° = 0.6 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.6·9.81·tan 30°) = 1.843 m/s

Period

T = 2π·r/v = 2π·0.6/1.843 = 2.045 s

Answer

T = 2.045 s
8.Circular motion

Answer: hmin = 25 m

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Condition at the top

m·g = m·v²/R → v² = g·R

Energy conservation

g·h = g·2R + ½·g·R → h = 2.5·R = 2.5·10 = 25 m

Answer

hmin = 25 m
9.Work & energy

Answer: d = 17.7 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 60/3.6 = 16.67 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 16.67²/(2·0.8·9.81) = 17.7 m

Answer

d = 17.7 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: v = 6.379 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 10·9.81 = 98.1 N
mg·sin θ = 56.27 N
μ·mg·cos θ = 8.036 N

Work–energy

½mv² = (105 − 64.3)·5 = 203.5 J
v = √(2·203.5/10) = 6.379 m/s

Answer

v = 6.379 m/s
11.Momentum & collisions

Answer: v = 348.3 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.22) = 2.078 m/s

Collision

m·v = (m + M)·V → v = (0.012 + 2)·2.078/0.012 = 348.3 m/s

Answer

v = 348.3 m/s
12.Momentum & collisions

Answer: v1 = 15.04 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.6·9.81·6) = 8.404 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 3400·8.404/1900 = 15.04 m/s

Answer

v1 = 15.04 m/s
(54.14 km/h)
13.Rigid-body rotation

Answer: P = 115.6 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1600/60 = 167.6 rad/s

Power

P = T·ω = 690·167.6 = 115611 W = 115.6 kW

Answer

P = 115.6 kW
14.Rigid-body rotation

Answer: Erot = 178.1 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·9.5·7.5² = 267.2 J
Erot = ½·I·ω² = ½·0.6667·m·r²·(v/r)² = 0.6667·267.2 = 178.1 J

Answer

Erot = 178.1 J
15.Gears & gear trains

Answer: n2 = 430.6 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1450·120/400 = 435 rpm

With slip

n2 = 435·0.99 = 430.6 rpm

Answer

n2 = 430.6 rpm
16.Gears & gear trains

Answer: P = 4.061 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 3.042 rad

Slack-side tension

eμθ = e0.9125 = 2.49, T₂ = 1200/2.49 = 481.8 N

Power

P = (1200 − 481.8)·5.655 = 4.061 kW

Answer

P = 4.061 kW
17.Springs & pendulums

Answer: g = 8.86 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·1.6/2.67² = 8.86 m/s²

Answer

g = 8.86 m/s²
18.Springs & pendulums

Answer: E = 2.448 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(340/2.1) = 12.72 rad/s

Energy

E = ½·k·A² = ½·340·0.12² = 2.448 J

Answer

E = 2.448 J
19.Mechanical vibrations

Answer: ζ = 0.04996

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/2)·ln(15/8) = 0.3143

Damping ratio

ζ = δ/√(4π² + δ²) = 0.3143/√(39.48 + 0.09879) = 0.04996

Answer

ζ = 0.04996
20.Mechanical vibrations

Answer: fn = 5.033 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 15 + 25 = 40 kN/m
keq = 40·40/(40 + 40) = 20 kN/m

Natural frequency

ωn = √(20000/20) = 31.62 rad/s
fn = 31.62/(2π) = 5.033 Hz

Answer

fn = 5.033 Hz

ExamProblems · examproblems.com/courses/dynamics