Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.778 s12.5

A car driving at 45 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. Find the braking distance s.

v₀ = 45 km/ha = −4.5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 11 m/s25 m

A ball is thrown straight up at 11 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 11 m/sh₀ = 25 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
9 kg4.5 kg

Masses of 9 kg and 4.5 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 9 kgm2 = 4.5 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
1 kg5 kgTF = 40 Nμ = 0.3

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 40 N pulls the front 5 kg block; the 1 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 1 kgm2 = 5 kgF = 40 Nμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 34 m/s60°x = ?

A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 34 m/sθ = 60°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 40 mv0​ = 35 m/s50°H = ?

A ball is launched at 35 m/s and 50° above the horizontal from the top of a 40 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 35 m/sθ = 50°h = 40 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 115 mvmax​ = ?

A car drives over the top of a hump in the road, which is a circular arc of radius 115 m. Use g = 9.81 m/s². Above what speed vmax do the wheels leave the road at the top?

r = 115 mg = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 5 mh = 18 m

A 5 kg cart is released from rest at a height of 18 m on a frictionless track and runs through a vertical loop of radius 5 m. Use g = 9.81 m/s². Find the normal force Ntop of the track on the cart at the top of the loop.

m = 5 kgh = 18 mR = 5 mg = 9.81 m/s²
Ntop = N
9.Work & energyMedium
35°d = 17 mμ = 0.1

A 2 kg block slides 17 m down a slope at 35° to the horizontal, with a coefficient of kinetic friction of 0.1. Find the work Wf done against friction.

m = 2 kgθ = 35°μ = 0.1d = 17 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
5 kg3 kgμ = 0.1d = 1 m

A 5 kg block rests on a rough horizontal table (μ = 0.1). A light string runs from it over a smooth pulley at the edge of the table to a hanging 3 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 1 m.

m1 = 5 kgm2 = 3 kgμ = 0.1d = 1 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
3.5 kg6 m/s2 kg

A 3.5 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 2 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 3.5 kgm2 = 2 kgv1 = 6 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
1900 kgv1​ = ?1500 kg

A 1900 kg car runs into a parked 1500 kg car. The wrecks lock together and skid 22 m before stopping. The coefficient of kinetic friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1900 kgm2 = 1500 kgd = 22 mμ = 0.6g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
0 → 800 rpmI = 27.5 kg·m²

A motor brings a flywheel with a moment of inertia of 27.5 kg·m² from rest up to 800 rpm in 38 s. Ignoring losses, find the average power Pavg it delivers, in kW.

I = 27.5 kg·m²n = 800 rpmt = 38 s
Pavg = kW
14.Rigid-body rotationHard
θ = 40°vs = 7.5 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 7.5 m along the slope.

θ = 40°s = 7.5 mI = m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
N1​ = 72N2​ = 80

A 1.1 kW motor running at 1500 rpm drives a pinion with 72 teeth, which meshes with a gear with 80 teeth. The gear pair has an efficiency of 96%. Find the torque T1 on the motor shaft.

P = 1.1 kWn1 = 1500 rpmN1 = 72N2 = 80η = 96%
T1 = N·m
16.Gears & gear trainsHard
d1​ = 120 mmd2​ = 250 mm1500 rpmC = 1200 mmθ = ?

An open belt connects a 120 mm pulley and a 250 mm pulley whose centres are 1200 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 120 mmd2 = 250 mmC = 1200 mm
θ = °
17.Springs & pendulumsMedium
L = 1.5 mT = 3.99 s

An astronaut on another planet finds that a simple pendulum 1.5 m long has a period of 3.99 s for small swings. Find the gravitational acceleration g on that planet.

L = 1.5 mT = 3.99 s
g = m/s²
18.Springs & pendulumsHard
3 kgk = 800 N/m150 m/s

A 5 g bullet moving at 150 m/s hits and stays in a 3 kg block resting on a frictionless surface. The block is attached to a horizontal spring with k = 800 N/m. Find the amplitude A of the resulting oscillation in cm.

m = 5 gv = 150 m/sM = 3 kgk = 800 N/m
A = cm
19.Mechanical vibrationsMedium
k = 25 kN/mc = 490 N·s/mm = 15 kg

A 15 kg mass is supported by a spring with a stiffness of 25 kN/m and a viscous damper with a damping coefficient of 490 N·s/m. Find the damping ratio ζ.

m = 15 kgk = 25 kN/mc = 490 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 50k2​ = 80m = 5 kg

A 5 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 50 kN/m and k₂ = 80 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 50 kN/mk2 = 80 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 17.36 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·4.5) = 17.36 m

Answer

s = 17.36 m
2.Kinematics

Answer: t = 3.642 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−25 = 11·t − ½·9.81·t²
4.905·t² − 11·t − 25 = 0

Solve the quadratic

Only the positive root is physical.

t = (11 + √(11² + 2·9.81·25))/9.81 = 3.642 s

Answer

t = 3.642 s
3.Newton’s laws

Answer: T = 58.86 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration

The net driving force is the difference of the weights; it moves the total mass.

a = (9 − 4.5)·9.81/(9 + 4.5) = 3.27 m/s²

Tension from the lighter mass

T − m2·g = m2·a → T = 4.5·(9.81 + 3.27) = 58.86 N

Answer

T = 58.86 N
4.Newton’s laws

Answer: T = 6.667 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (40 − 17.66)/6 = 3.724 m/s²

Rear block alone

T = m1·(a + μ·g) = 1·(3.724 + 2.943) = 6.667 N

Answer

T = 6.667 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: x = 102.1 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 34·cos 60° = 17 m/s
vy = v0·sin θ = 34·sin 60° = 29.44 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·29.44/9.81 = 6.003 s

Horizontal distance

x = vx·t = 17·6.003 = 102.1 m

Answer

x = 102.1 m
6.Projectile motion

Answer: H = 76.64 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 35·sin 50° = 26.81 m/s

Rise above the cliff

Δh = vy²/(2g) = 26.81²/(2·9.81) = 36.64 m

Height above the ground

H = 40 + 36.64 = 76.64 m

Answer

H = 76.64 m
7.Circular motion

Answer: vmax = 33.59 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Normal force zero

m·g = m·v²/r → v = √(g·r) = √(9.81·115) = 33.59 m/s

Answer

vmax = 33.59 m/s
(120.9 km/h)
8.Circular motion

Answer: Ntop = 107.9 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·(18 − 2·5) = 157 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R − m·g = 5·157/5 − 49.05 = 107.9 N

Answer

Ntop = 107.9 N
9.Work & energy

Answer: Wf = 27.32 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 19.62·0.8192 = 16.07 N
F = μN = 0.1·16.07 = 1.607 N

Work against friction

Wf = F·d = 1.607·17 = 27.32 J

Answer

Wf = 27.32 J
10.Work & energy

Answer: v = 2.476 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 29.43·1 = 29.43 J
μ·m₁g·d = 0.1·49.05·1 = 4.905 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 24.52 → v = √(2·24.52/8) = 2.476 m/s

Answer

v = 2.476 m/s
11.Momentum & collisions

Answer: v′1 = 1.636 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (3.5 − 2)/(3.5 + 2)·6 = 1.636 m/s
v′2 = 2·3.5/(3.5 + 2)·6 = 7.636 m/s

Answer

v′1 = 1.636 m/s
12.Momentum & collisions

Answer: v1 = 28.8 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.6·9.81·22) = 16.09 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 3400·16.09/1900 = 28.8 m/s

Answer

v1 = 28.8 m/s
(103.7 km/h)
13.Rigid-body rotation

Answer: Pavg = 2.54 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·800/60 = 83.78 rad/s

Energy

E = ½·I·ω² = ½·27.5·83.78² = 96503 J

Average power

Pavg = E/t = 96503/38 = 2540 W = 2.54 kW

Answer

Pavg = 2.54 kW
14.Rigid-body rotation

Answer: v = 6.877 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 7.5·sin 40° = 4.821 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·4.821/2) = 6.877 m/s

Answer

v = 6.877 m/s
15.Gears & gear trains

Answer: T1 = 7.003 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 1100/157.1 = 7.003 N·m

Answer

T1 = 7.003 N·m
16.Gears & gear trains

Answer: θ = 173.8 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.05417) = 3.105°

Angle of wrap

θ = 180 − 2·3.105 = 173.8°

Answer

θ = 173.8°
17.Springs & pendulums

Answer: g = 3.72 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·1.5/3.99² = 3.72 m/s²

Answer

g = 3.72 m/s²
18.Springs & pendulums

Answer: A = 1.53 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Speed after impact

V = m·v/(m + M) = 0.005·150/3.005 = 0.2496 m/s

Angular frequency

ω = √(k/(m + M)) = √(800/3.005) = 16.32 rad/s

Amplitude

A = V/ω = 0.2496/16.32 = 0.0153 m = 1.53 cm

Answer

A = 1.53 cm
19.Mechanical vibrations

Answer: ζ = 0.4001

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(25000·15) = 1225 N·s/m

Damping ratio

ζ = c/cc = 490/1225 = 0.4001

Answer

ζ = 0.4001

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 25.66 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 50 + 80 = 130 kN/m

Natural frequency

ωn = √(130000/5) = 161.2 rad/s
fn = 161.2/(2π) = 25.66 Hz

Answer

fn = 25.66 Hz

ExamProblems · examproblems.com/courses/dynamics