In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A plane needs a speed of 240 km/h to take off and the usable runway is 2200 m long. Starting from rest, what constant acceleration a does it need?
v₀ = 0v = 240 km/hs = 2200 m
a = m/s²
2.KinematicsHard
A ball is thrown straight up at 9 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 9 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
An 18 kg block slides down a frictionless slope at 25° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 18 kgθ = 25°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A block is given a push so that it starts sliding up a ramp at 30° with a speed of 8.5 m/s. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?
v₀ = 8.5 m/sθ = 30°μ = 0.2g = 9.81 m/s²
d = m
5.Projectile motionMedium
A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 20 m/sθ = 25°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 26 m/s and 55° above the horizontal from the top of a 15 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?
v₀ = 26 m/sθ = 55°h = 15 mg = 9.81 m/s²
α = °
7.Circular motionMedium
In a fairground rotor, riders stand against the wall of a vertical cylinder of radius 3.3 m. When it spins fast enough the floor drops away and friction holds them up. The coefficient of static friction is 0.4. Use g = 9.81 m/s². Find the smallest angular speed ω in rad/s.
r = 3.3 mμs = 0.4g = 9.81 m/s²
ω = rad/s
8.Circular motionHard
A ball on a string 0.9 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?
r = 0.9 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
A 1 kg block slides 14 m down a slope at 20° to the horizontal, with a coefficient of kinetic friction of 0.15. Find the work Wf done against friction.
m = 1 kgθ = 20°μ = 0.15d = 14 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
A spring of stiffness 5000 N/m at the bottom of a 25° slope is compressed by 10 cm against a 5 kg block and released. The coefficient of kinetic friction between block and slope is 0.3. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)
A 1 kg glider moving at 7 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 1 kgm2 = 0.5 kgv1 = 7 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
At a crossing a 900 kg car travelling east at 11 m/s collides with a 1700 kg car travelling north at 17 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.
m1 = 900 kgv1 = 11 m/s (E)m2 = 1700 kgv2 = 17 m/s (N)
θ = °
13.Rigid-body rotationMedium
An 8 kg block hangs from a light cord wrapped around a pulley, a uniform solid disc of mass 17.5 kg and radius 0.5 m that turns on a frictionless horizontal axle. The block is released from rest. Use g = 9.81 m/s². Find the tension T in the cord.
m = 8 kgM = 17.5 kgR = 0.5 mg = 9.81 m/s²
T = N
14.Rigid-body rotationHard
A thin hoop starts from rest and rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 9.5 m along the slope.
θ = 20°s = 9.5 mI = m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
A 100 mm pulley at 960 rpm drives a 300 mm pulley by a belt with 1 % slip. Find the speed n2 of the driven pulley.
n1 = 960 rpmd1 = 100 mmd2 = 300 mms = 1 %
n2 = rpm
16.Gears & gear trainsHard
In a compound gear train, gear A (15 teeth) on the input shaft turning at 3000 rpm drives gear B (36 teeth). Gear C (15 teeth) is fixed to the same shaft as B and drives gear D (32 teeth) on the output shaft. Find the output speed nout.
nin = 3000 rpmA = 15B = 36C = 15D = 32
nout = rpm
17.Springs & pendulumsMedium
A simple pendulum has a length of 1 m. Use g = 9.81 m/s². Find its period T for small swings.
L = 1 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
A 1.5 kg mass is attached to the lower end of an unstretched vertical spring with k = 270 N/m and released from rest. Use g = 9.81 m/s². Find the greatest speed vmax of the mass.
m = 1.5 kgk = 270 N/mg = 9.81 m/s²
vmax = m/s
19.Mechanical vibrationsMedium
A 5 kg mass is supported by a spring with a stiffness of 25 kN/m and a viscous damper with a damping coefficient of 110 N·s/m. Find the damping ratio ζ.
m = 5 kgk = 25 kN/mc = 110 N·s/m
ζ =
20.Mechanical vibrationsHard
A 20 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 10 kN/m and the lower one k₂ = 80 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.
m = 20 kgk1 = 10 kN/mk2 = 80 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: a = 1.01 m/s²
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v = 240/3.6 = 66.67 m/s
Acceleration
a = v²/(2s) = 66.67²/(2·2200) = 1.01 m/s²
Answer
a = 1.01 m/s²
2.Kinematics
Answer: t = 2.892 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−15 = 9·t − ½·9.81·t²
4.905·t² − 9·t − 15 = 0
Solve the quadratic
Only the positive root is physical.
t = (9 + √(9² + 2·9.81·15))/9.81 = 2.892 s
Answer
t = 2.892 s
3.Newton’s laws
Answer: a = 4.146 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
Both forces point down the slope; the mass cancels.
a = 9.81·(sin 30° + 0.2·cos 30°) = 6.604 m/s²
Distance
d = v₀²/(2a) = 8.5²/(2·6.604) = 5.47 m
Answer
d = 5.47 m
5.Projectile motion
Answer: t = 1.723 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 20·cos 25° = 18.13 m/s
vy = v0·sin θ = 20·sin 25° = 8.452 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·8.452/9.81 = 1.723 s
Answer
t = 1.723 s
6.Projectile motion
Answer: α = 61.4 °
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 26·cos 55° = 14.91 m/s
vy0 = 26·sin 55° = 21.3 m/s
Vertical speed at impact
Energy or v² = v₀² + 2as in the vertical direction.
vy = √(21.3² + 2·9.81·15) = 27.35 m/s
Impact angle
tan α = vy/vx = 27.35/14.91 → α = 61.4°
Answer
α = 61.4°
7.Circular motion
Answer: ω = 2.726 rad/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Forces on a rider
N = m·ω²·r
μ·N = m·g → μ·ω²·r = g
Angular speed
ω = √(g/(μ·r)) = √(9.81/(0.4·3.3)) = 2.726 rad/s
Answer
ω = 2.726 rad/s
8.Circular motion
Answer: vmin = 2.971 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Tension zero at the top
m·g = m·v²/r → v = √(g·r) = √(9.81·0.9) = 2.971 m/s
Answer
vmin = 2.971 m/s
9.Work & energy
Answer: Wf = 19.36 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 9.81·0.9397 = 9.218 N
F = μN = 0.15·9.218 = 1.383 N
Work against friction
Wf = F·d = 1.383·14 = 19.36 J
Answer
Wf = 19.36 J
10.Work & energy
Answer: d = 0.7339 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 10 cm = 0.1 m
½kx² = ½·5000·0.1² = 25 J
Energy balance along the slope
m·g = 5·9.81 = 49.05 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 25/(49.05·(0.4226 + 0.3·0.9063)) = 0.7339 m
Answer
d = 0.7339 m
11.Momentum & collisions
Answer: v′2 = 9.333 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (1 − 0.5)/(1 + 0.5)·7 = 2.333 m/s
v′2 = 2·1/(1 + 0.5)·7 = 9.333 m/s
Answer
v′2 = 9.333 m/s
12.Momentum & collisions
Answer: θ = 71.09 °
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum components
px = 900·11 = 9900 kg·m/s
py = 1700·17 = 28900 kg·m/s
Direction
tan θ = py/px = 2.919 → θ = 71.09°
Answer
θ = 71.09°
13.Rigid-body rotation
Answer: T = 41 N
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 9.5·sin 20° = 3.249 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·3.249/2) = 5.646 m/s
Answer
v = 5.646 m/s
15.Gears & gear trains
Answer: n2 = 316.8 rpm
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Speed without slip
960·100/300 = 320 rpm
With slip
n2 = 320·0.99 = 316.8 rpm
Answer
n2 = 316.8 rpm
16.Gears & gear trains
Answer: nout = 585.9 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 3000·15/36 = 1250 rpm = nC
Second stage
nout = 1250·15/32 = 585.9 rpm
Answer
nout = 585.9 rpm
total ratio = 5.12 : 1
17.Springs & pendulums
Answer: T = 2.006 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Pendulum period
T = 2π·√(1/9.81) = 2.006 s
Answer
T = 2.006 s
18.Springs & pendulums
Answer: vmax = 0.7312 m/s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Equilibrium and amplitude
x₀ = m·g/k = 1.5·9.81/270 = 0.0545 m = A
Greatest speed
The speed is largest at equilibrium.
ω = √(270/1.5) = 13.42 rad/s
vmax = A·ω = 0.0545·13.42 = 0.7312 m/s
Answer
vmax = 0.7312 m/s
19.Mechanical vibrations
Answer: ζ = 0.1556
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(25000·5) = 707.1 N·s/m
Damping ratio
ζ = c/cc = 110/707.1 = 0.1556
Answer
ζ = 0.1556
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 3.355 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.