In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A driver moving at 50 km/h sees an obstacle. Her reaction time is 1.4 s, after which the car brakes with a constant deceleration of 8 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 50 km/htr = 1.4 sa = −8 m/s²
d = m
2.KinematicsHard
A stone is dropped from rest into a well. The splash is heard 3.1 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.
ttotal = 3.1 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
A 14 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 14 kgθ = 25°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 65 N pulls the front 11 kg block; the 6 kg block is towed behind. The coefficient of kinetic friction is 0.1 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.
m1 = 6 kgm2 = 11 kgF = 65 Nμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 34 m/sθ = 60°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is thrown from ground level at 18 m/s and 50° above the horizontal. It lands on the flat roof of a building 4 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 18 m/sθ = 50°hroof = 4 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A car takes a flat curve of radius 75 m. The coefficient of static friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.
r = 75 mμs = 0.8g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
A curve of radius 70 m is banked at 10°, and the coefficient of static friction between tyres and road is 0.1. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.
r = 70 mθ = 10°μs = 0.1g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
A car travelling at 50 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.8. Find the stopping distance d.
v = 50 km/hμ = 0.8g = 9.81 m/s²
d = m
10.Work & energyHard
A 2.5 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4.5 m long (μ = 0.3) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 2.5 kgh = 2.5 mL = 4.5 mμ = 0.3k = 800 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
A 19 kg projectile moving horizontally at 7 m/s explodes into two fragments that move along the same line. The 17 kg fragment continues forwards at 30 m/s. Find the velocity v′2 of the 2 kg fragment (positive in the original direction).
M = 19 kgu = 7 m/sm1 = 17 kgv′1 = 30 m/sm2 = 2 kg
v′2 = m/s
12.Momentum & collisionsHard
A 5 g bullet is fired horizontally into a 3.5 kg block hanging from light strings 1.4 m long, and stays in it. The strings swing out to a largest angle of 15° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 5 gM = 3.5 kgL = 1.4 mθ = 15°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
A flywheel with a moment of inertia of 21.5 kg·m² spins at 500 rpm. A brake applies a constant friction torque of 135 N·m. How long t does it take to stop?
I = 21.5 kg·m²n = 500 rpmTb = 135 N·m
t = s
14.Rigid-body rotationHard
A thin hoop starts from rest and rolls without slipping down a slope inclined at 30° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 9.5 m along the slope.
θ = 30°s = 9.5 mI = m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
A 5.5 kW motor running at 1450 rpm drives a pinion with 25 teeth and a module of 3 mm. Find the tangential force Ft on the pinion teeth.
P = 5.5 kWn = 1450 rpmN1 = 25m = 3 mm
Ft = N
16.Gears & gear trainsHard
An open belt connects a 120 mm driving pulley at 960 rpm to a 300 mm pulley; the centres are 600 mm apart. The coefficient of friction is 0.3 and the tight-side tension may not exceed 1500 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).
A 1.8 kg mass on a spring with k = 190 N/m is pulled 9 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 0.9 s (with sign).
m = 1.8 kgk = 190 N/mA = 9 cmt = 0.9 s
x = cm
18.Springs & pendulumsHard
A 2.8 kg mass on a spring with k = 220 N/m is pulled 16 cm from equilibrium and released. Find its maximum acceleration amax.
m = 2.8 kgk = 220 N/mA = 16 cm
amax = m/s²
19.Mechanical vibrationsMedium
A 20 kg mass is supported by a spring with a stiffness of 100 kN/m and a viscous damper with a damping coefficient of 420 N·s/m. Find the damping ratio ζ.
m = 20 kgk = 100 kN/mc = 420 N·s/m
ζ =
20.Mechanical vibrationsHard
A 10 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 50 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.
m = 10 kgk1 = 40 kN/mk2 = 50 kN/mk3 = 25 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: d = 31.5 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 50/3.6 = 13.89 m/s
Reaction distance
d1 = v₀·tr = 13.89·1.4 = 19.44 m
Braking distance
d2 = v₀²/(2a) = 13.89²/(2·8) = 12.06 m
Total
d = 19.44 + 12.06 = 31.5 m
Answer
d = 31.5 m
2.Kinematics
Answer: d = 43.37 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Two parts of the time
½·9.81·t₁² = 343·(3.1 − t₁)
4.905·t₁² + 343·t₁ − 1063 = 0
Fall time
Only the positive root is physical.
t₁ = (−343 + √(343² + 4·4.905·1063))/(2·4.905) = 2.974 s
Depth
d = ½·9.81·2.974² = 43.37 m
Answer
d = 43.37 m
3.Newton’s laws
Answer: a = 1.479 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 34·cos 60° = 17 m/s
vy = v0·sin θ = 34·sin 60° = 29.44 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·29.44/9.81 = 6.003 s
Answer
t = 6.003 s
6.Projectile motion
Answer: x = 28.73 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 11.57 m/s, vy = 13.79 m/s
Time to land on the roof
Larger root: the ball is descending.
4 = 13.79·t − 4.905·t²
t = (13.79 + √(13.79² − 2·9.81·4))/9.81 = 2.483 s
Horizontal distance
x = vx·t = 11.57·2.483 = 28.73 m
Answer
x = 28.73 m
7.Circular motion
Answer: vmax = 24.26 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Friction provides the centripetal force
m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.8·9.81·75) = 24.26 m/s
Answer
vmax = 24.26 m/s (87.34 km/h)
8.Circular motion
Answer: vmax = 13.9 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Force balances
Friction points down the slope.
N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g
Speed
v = √(70·9.81·0.2721/0.9674) = 13.9 m/s
Answer
vmax = 13.9 m/s
(50.03 km/h)
9.Work & energy
Answer: d = 12.29 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Speed in base units
v = 50/3.6 = 13.89 m/s
Energy balance
½mv² = μmg·d → d = v²/(2μg) = 13.89²/(2·0.8·9.81) = 12.29 m
Answer
d = 12.29 m
Doubling the speed makes the stopping distance four times longer.
10.Work & energy
Answer: x = 26.55 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 24.53·(2.5 − 0.3·4.5) = 28.2 J
Maximum compression
½kx² = 28.2 → x = √(2·28.2/800) = 0.2655 m = 26.55 cm
Answer
x = 26.55 cm
11.Momentum & collisions
Answer: v′2 = −188.5 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum before
p = M·u = 19·7 = 133 kg·m/s
Momentum after
133 = 17·30 + 2·v′2
v′2 = (133 − 510)/2 = −188.5 m/s
Answer
v′2 = −188.5 m/s
The minus sign means the second fragment flies backwards.
12.Momentum & collisions
Answer: v = 678.2 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 1.4·(1 − cos 15°) = 0.0477 m
Speed after impact
V = √(2·9.81·0.0477) = 0.9674 m/s
Collision
v = (m + M)·V/m = 3.505·0.9674/0.005 = 678.2 m/s
Answer
v = 678.2 m/s
13.Rigid-body rotation
Answer: t = 8.339 s
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·500/60 = 52.36 rad/s
Deceleration and time
α = Tb/I = 135/21.5 = 6.279 rad/s²
t = ω/α = 52.36/6.279 = 8.339 s
Answer
t = 8.339 s
14.Rigid-body rotation
Answer: v = 6.826 m/s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 9.5·sin 30° = 4.75 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·4.75/2) = 6.826 m/s
Answer
v = 6.826 m/s
15.Gears & gear trains
Answer: Ft = 965.9 N
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Torque on the pinion
ω = 2π·1450/60 = 151.8 rad/s
T = P/ω = 5500/151.8 = 36.22 N·m
Pitch diameter
d = m·N = 3·25 = 75 mm
Tangential force
Ft = 2T/d = 2·36.22/0.075 = 965.9 N
Answer
Ft = 965.9 N
16.Gears & gear trains
Answer: P = 5.189 kW
Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.
Angle of wrap
θ = 2.84 rad
Slack-side tension
eμθ = e0.8521 = 2.345, T₂ = 1500/2.345 = 639.8 N
Power
P = (1500 − 639.8)·6.032 = 5.189 kW
Answer
P = 5.189 kW
17.Springs & pendulums
Answer: x = −8.858 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(190/1.8) = 10.27 rad/s
ω·t = 10.27·0.9 = 9.247 rad
Displacement
x = A·cos(ω·t) = 9·cos(9.247) = −8.858 cm
Answer
x = −8.858 cm
18.Springs & pendulums
Answer: amax = 12.57 m/s²
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(220/2.8) = 8.864 rad/s
Maximum acceleration
amax = A·ω² = 0.16·8.864² = 12.57 m/s²
Answer
amax = 12.57 m/s²
19.Mechanical vibrations
Answer: ζ = 0.1485
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Critical damping
cc = 2·√(k·m) = 2·√(100000·20) = 2828 N·s/m
Damping ratio
ζ = c/cc = 420/2828 = 0.1485
Answer
ζ = 0.1485
ζ < 1, so the system is underdamped and oscillates as it decays.
20.Mechanical vibrations
Answer: fn = 7.04 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.