In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car speeding at a constant 28 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3 m/s². How long does it take the police car to catch up? Find t.
vcar = 28 m/sapolice = 3 m/s²v0,police = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 11 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 11 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 40 kg box is pushed up a ramp at 30° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.4. Use g = 9.81 m/s². Find the pushing force F.
m = 40 kgθ = 30°μ = 0.4g = 9.81 m/s²
F = N
4.Newton’s lawsHard
A 6.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 0.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 6.5 kgm2 = 0.5 kgμ = 0g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is kicked from level ground at 34 m/s and 25° above the horizontal towards a wall 27 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 34 m/sθ = 25°x = 27 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is thrown from ground level at 25 m/s and 70° above the horizontal. It lands on the flat roof of a building 20 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 25 m/sθ = 70°hroof = 20 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A small ball on a string of length 1.7 m moves in a horizontal circle so that the string makes a constant angle of 30° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.
L = 1.7 mθ = 30°g = 9.81 m/s²
T = s
8.Circular motionHard
A 0.6 kg ball on a light string 1 m long is swung in a vertical circle. At the lowest point its speed is 12 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.
m = 0.6 kgr = 1 mvbottom = 12 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
A 0.5 kg block slides 3 m down a slope at 40° to the horizontal, with a coefficient of kinetic friction of 0.1. Find the work Wf done against friction.
m = 0.5 kgθ = 40°μ = 0.1d = 3 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
A 15 kg block starts from rest at the bottom of a 25° slope and is pulled up the slope by a constant force of 195 N parallel to the slope. The coefficient of kinetic friction is 0.25. Find the speed v of the block after it has moved 3 m up the slope.
A 1900 kg car moving at 23 m/s runs into a stationary 800 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?
m1 = 1900 kgv1 = 23 m/sm2 = 800 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
At a crossing a 1000 kg car travelling east at 12 m/s collides with a 1200 kg car travelling north at 19 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.
m1 = 1000 kgv1 = 12 m/s (E)m2 = 1200 kgv2 = 19 m/s (N)
θ = °
13.Rigid-body rotationMedium
A motor brings a flywheel with a moment of inertia of 29 kg·m² from rest up to 900 rpm in 8 s. Ignoring losses, find the average power Pavg it delivers, in kW.
I = 29 kg·m²n = 900 rpmt = 8 s
Pavg = kW
14.Rigid-body rotationHard
A hollow sphere starts from rest and rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 6.5 m along the slope.
θ = 40°s = 6.5 mI = (2/3)·m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
A worm with 1 start(s) turns at 1450 rpm and drives a worm wheel with 80 teeth. Find the speed nw of the wheel.
z = 1Nw = 80n = 1450 rpm
nw = rpm
16.Gears & gear trainsHard
In a compound gear train, gear A (20 teeth) on the input shaft turning at 960 rpm drives gear B (32 teeth). Gear C (15 teeth) is fixed to the same shaft as B and drives gear D (60 teeth) on the output shaft. Find the output speed nout.
nin = 960 rpmA = 20B = 32C = 15D = 60
nout = rpm
17.Springs & pendulumsMedium
A 3.2 kg mass on a spring with k = 200 N/m is pulled 15 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 1.35 s (with sign).
m = 3.2 kgk = 200 N/mA = 15 cmt = 1.35 s
x = cm
18.Springs & pendulumsHard
A mass on a spring with k = 240 N/m oscillates on a frictionless surface with an amplitude of 19 cm. Find its kinetic energy K when it is 3 cm from equilibrium.
k = 240 N/mA = 19 cmx = 3 cm
K = J
19.Mechanical vibrationsMedium
A 20 kg mass on a spring with a stiffness of 4 kN/m has a viscous damper giving a damping ratio of 0.3. Find the damped natural frequency fd of its free vibration in Hz.
m = 20 kgk = 4 kN/mζ = 0.3
fd = Hz
20.Mechanical vibrationsHard
A 25 kg mass hangs from spring k₃ = 10 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 40 kN/m and k₂ = 5 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.
m = 25 kgk1 = 40 kN/mk2 = 5 kN/mk3 = 10 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: t = 18.67 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·28/3 = 18.67 s
Answer
t = 18.67 s
At that moment the police car moves at 2v = 56 m/s.
2.Kinematics
Answer: t = 3.837 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−30 = 11·t − ½·9.81·t²
4.905·t² − 11·t − 30 = 0
Solve the quadratic
Only the positive root is physical.
t = (11 + √(11² + 2·9.81·30))/9.81 = 3.837 s
Answer
t = 3.837 s
3.Newton’s laws
Answer: F = 332.1 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 196.2 + 135.9 = 332.1 N
Answer
F = 332.1 N
4.Newton’s laws
Answer: T = 4.555 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 34·cos 25° = 30.81 m/s
t = x/vx = 27/30.81 = 0.8762 s
Height at that time
y = 14.37·0.8762 − ½·9.81·0.8762² = 8.825 m
Answer
y = 8.825 m
The ball is still rising at the wall.
6.Projectile motion
Answer: x = 31.48 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 8.551 m/s, vy = 23.49 m/s
Time to land on the roof
Larger root: the ball is descending.
20 = 23.49·t − 4.905·t²
t = (23.49 + √(23.49² − 2·9.81·20))/9.81 = 3.682 s
Horizontal distance
x = vx·t = 8.551·3.682 = 31.48 m
Answer
x = 31.48 m
7.Circular motion
Answer: T = 2.434 s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Radius of the circle
r = L·sin θ = 1.7·sin 30° = 0.85 m
Speed
Tension and gravity together give the inward force: tan θ = v²/(r·g).
v = √(r·g·tan θ) = √(0.85·9.81·tan 30°) = 2.194 m/s
Period
T = 2π·r/v = 2π·0.85/2.194 = 2.434 s
Answer
T = 2.434 s
8.Circular motion
Answer: Ttop = 56.97 N
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Speed at the top
Kinetic energy is traded for potential energy over a height 2r.
vtop² = 12² − 4·9.81·1 = 104.8 m²/s²
Forces at the top
Tension and gravity both point down, towards the centre.
T + m·g = m·vtop²/r
T = 0.6·104.8/1 − 0.6·9.81 = 56.97 N
Answer
Ttop = 56.97 N
9.Work & energy
Answer: Wf = 1.127 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 4.905·0.766 = 3.757 N
F = μN = 0.1·3.757 = 0.3757 N
Work against friction
Wf = F·d = 0.3757·3 = 1.127 J
Answer
Wf = 1.127 J
10.Work & energy
Answer: v = 6.308 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 15·9.81 = 147.2 N
mg·sin θ = 62.19 N
μ·mg·cos θ = 33.34 N
Work–energy
½mv² = (195 − 95.53)·3 = 298.4 J
v = √(2·298.4/15) = 6.308 m/s
Answer
v = 6.308 m/s
11.Momentum & collisions
Answer: ΔK/K = 29.63 %
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 1900·23/2700 = 16.19 m/s
Kinetic energy before and after
Kbefore = ½·1900·23² = 502550 J
Kafter = ½·2700·16.19² = 353646 J
Fraction lost
ΔK/K = 148904/502550 = 29.63 %
Answer
ΔK/K = 29.63 %
The lost energy goes into deformation, heat and sound.
12.Momentum & collisions
Answer: θ = 62.24 °
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum components
px = 1000·12 = 12000 kg·m/s
py = 1200·19 = 22800 kg·m/s
Direction
tan θ = py/px = 1.9 → θ = 62.24°
Answer
θ = 62.24°
13.Rigid-body rotation
Answer: Pavg = 16.1 kW
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Angular velocity
ω = 2π·900/60 = 94.25 rad/s
Energy
E = ½·I·ω² = ½·29·94.25² = 128798 J
Average power
Pavg = E/t = 128798/8 = 16100 W = 16.1 kW
Answer
Pavg = 16.1 kW
14.Rigid-body rotation
Answer: v = 7.013 m/s
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Height dropped
h = s·sin θ = 6.5·sin 40° = 4.178 m
Energy balance with rolling
Rolling without slipping: ω = v/r, and friction does no work at the contact point.
m·g·h = ½·m·v²·(1 + 0.6667)
v = √(2·9.81·4.178/1.667) = 7.013 m/s
Answer
v = 7.013 m/s
15.Gears & gear trains
Answer: nw = 18.13 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Wheel speed
nw = n·z/Nw = 1450·1/80 = 18.13 rpm
Answer
nw = 18.13 rpm
16.Gears & gear trains
Answer: nout = 150 rpm
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
First stage
nB = 960·20/32 = 600 rpm = nC
Second stage
nout = 600·15/60 = 150 rpm
Answer
nout = 150 rpm
total ratio = 6.4 : 1
17.Springs & pendulums
Answer: x = −4.76 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(200/3.2) = 7.906 rad/s
ω·t = 7.906·1.35 = 10.67 rad
Displacement
x = A·cos(ω·t) = 15·cos(10.67) = −4.76 cm
Answer
x = −4.76 cm
18.Springs & pendulums
Answer: K = 4.224 J
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Total energy
E = ½·k·A² = ½·240·0.19² = 4.332 J
Spring energy at x
U = ½·k·x² = ½·240·0.03² = 0.108 J
Kinetic energy
K = 4.332 − 0.108 = 4.224 J
Answer
K = 4.224 J
19.Mechanical vibrations
Answer: fd = 2.147 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(4000/20) = 14.14 rad/s
fn = 14.14/(2π) = 2.251 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 2.251·√(1 − 0.3²) = 2.147 Hz
Answer
fd = 2.147 Hz
20.Mechanical vibrations
Answer: fn = 2.879 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.