Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 2200 m

A plane needs a speed of 250 km/h to take off and the usable runway is 2200 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 250 km/hs = 2200 m
a = m/s²
2.KinematicsHard
a = 22 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 22 m/s² for 2 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². How long after launch does it hit the ground? Find t.

a = 22 m/s²t1 = 2 sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
boxv₀ = 2 m/sμ = ?

A box slides across a level floor with an initial speed of 2 m/s and comes to rest after 0.51 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 2 m/sd = 0.51 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
11 kg4 kgTF = 110 Nμ = 0.15

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 110 N pulls the front 4 kg block; the 11 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 11 kgm2 = 4 kgF = 110 Nμ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 30 m/s40°rangeH = ?

A ball is launched at 40° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.

v0 = 30 m/sθ = 40°g = 9.81 m/s²
H = m
6.Projectile motionHard
h = 25 mv0​ = 19 m/s35°x = ?

A ball is launched at 35° above horizontal from the top of a 25 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 19 m/sθ = 35°h = 25 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 100 mvmax​ = ?

A car takes a flat curve of radius 100 m. The coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 100 mμs = 0.4g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.8 mv = ?

A ball on a string 0.8 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 0.8 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
30°d = 6 mμ = 0.3

A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.3. Find its speed v after it has slid 6 m along the slope.

θ = 30°μ = 0.3d = 6 mg = 9.81 m/s²
v = m/s
10.Work & energyHard
h = 5.6 mR = 2 mN = ?

A 10 kg cart is released from rest at a height of 5.6 m on a smooth track that leads into a vertical circular loop of radius 2 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 10 kgh = 5.6 mR = 2 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
2 kgv = ?10 gh = 22 cm

A 10 g bullet is fired horizontally into a 2 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 22 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 10 gM = 2 kgh = 22 cmg = 9.81 m/s²
v = m/s
12.Momentum & collisionsHard
19 m/s14 m/s

A 0.55 kg ball hits a wall at 19 m/s and bounces straight back at 14 m/s. The contact lasts 20 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.55 kgvin = 19 m/svout = 14 m/sΔt = 20 ms
J = N·s
13.Rigid-body rotationMedium
L = 0.6 mm = 3.5 kgα

A uniform slender rod of mass 3.5 kg and length 0.6 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 3.5 kgL = 0.6 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
6.5 m/sω

A hollow sphere of mass 10 kg rolls without slipping at 6.5 m/s. Find its total kinetic energy Ek.

m = 10 kgv = 6.5 m/sI = (2/3)·m·r²
Ek = J
15.Gears & gear trainsMedium
d1​ = 80 mmd2​ = 300 mm1440 rpmn2​ = ?

An 80 mm pulley at 1440 rpm drives a 300 mm pulley by a belt with 3 % slip. Find the speed n2 of the driven pulley.

n1 = 1440 rpmd1 = 80 mmd2 = 300 mms = 3 %
n2 = rpm
16.Gears & gear trainsHard
d1​ = 80 mmd2​ = 450 mm2880 rpmC = 500 mmT1​ = 1500 NT2​P = ?

An open belt connects an 80 mm driving pulley at 2880 rpm to a 450 mm pulley; the centres are 500 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 1500 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 80 mmn1 = 2880 rpmd2 = 450 mmC = 500 mmμ = 0.25T1 = 1500 N
P = kW
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.9 s? Use g = 9.81 m/s². Find L.

T = 2.9 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
2.2 kgk = 370 N/mA = 8 cm

A 2.2 kg mass on a spring with k = 370 N/m is pulled 8 cm from equilibrium and released. Find its maximum speed vmax.

m = 2.2 kgk = 370 N/mA = 8 cm
vmax = m/s
19.Mechanical vibrationsMedium
tx50 mm1 cycle44.1 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 50 mm is followed one cycle later by a peak of 44.1 mm. Find the damping ratio ζ.

x0 = 50 mmx1 = 44.1 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 12k2​ = 60m = 25 kg

A 25 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 12 kN/m and the lower one k₂ = 60 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 12 kN/mk2 = 60 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: a = 1.096 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 250/3.6 = 69.44 m/s

Acceleration

a = v²/(2s) = 69.44²/(2·2200) = 1.096 m/s²

Answer

a = 1.096 m/s²
2.Kinematics

Answer: t = 11.88 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 22·2 = 44 m/s
h₁ = ½·22·2² = 44 m

Free flight to the ground

Solve −h₁ = v₁·t₂ − ½·g·t₂² for the positive root.

t₂ = (44 + √(44² + 2·9.81·44))/9.81 = 9.879 s
t = 2 + 9.879 = 11.88 s

Answer

t = 11.88 s
3.Newton’s laws

Answer: μ = 0.3998

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 2²/(2·0.51) = 3.922 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 3.922/9.81 = 0.3998

Answer

μ = 0.3998
4.Newton’s laws

Answer: T = 80.67 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (110 − 22.07)/15 = 5.862 m/s²

Rear block alone

T = m1·(a + μ·g) = 11·(5.862 + 1.472) = 80.67 N

Answer

T = 80.67 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: H = 18.95 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 30·cos 40° = 22.98 m/s
vy = v0·sin θ = 30·sin 40° = 19.28 m/s

Highest point

At the top the vertical velocity is zero: vy² = 2gH.

H = vy²/(2g) = 19.28²/(2·9.81) = 18.95 m

Answer

H = 18.95 m
6.Projectile motion

Answer: x = 56.45 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 19·cos 35° = 15.56 m/s
vy = v0·sin θ = 19·sin 35° = 10.9 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 25 + 10.9·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (10.9 + √(118.8 + 490.5))/9.81 = 3.627 s

Horizontal distance

x = vx·t = 15.56·3.627 = 56.45 m

Answer

x = 56.45 m
7.Circular motion

Answer: vmax = 19.81 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.4·9.81·100) = 19.81 m/s

Answer

vmax = 19.81 m/s (71.31 km/h)
8.Circular motion

Answer: vmin = 2.801 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·0.8) = 2.801 m/s

Answer

vmin = 2.801 m/s
9.Work & energy

Answer: v = 5.317 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·6·(0.5 − 0.3·0.866)) = 5.317 m/s

Answer

v = 5.317 m/s
10.Work & energy

Answer: N = 58.86 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(5.6 − 4) = 31.39 m²/s²

Forces at the top

m·g = 10·9.81 = 98.1 N
N = mv²/R − mg = 10·31.39/2 − 98.1 = 58.86 N

Answer

N = 58.86 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v = 417.6 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.22) = 2.078 m/s

Collision

m·v = (m + M)·V → v = (0.01 + 2)·2.078/0.01 = 417.6 m/s

Answer

v = 417.6 m/s
12.Momentum & collisions

Answer: J = 18.15 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.55·(14 + 19) = 18.15 N·s

Answer

J = 18.15 N·s
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·0.6) = 24.53 rad/s²

Acceleration of the free end

atip = α·L = 24.53·0.6 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: Ek = 352.1 J

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Translational and rotational parts

Etrans = ½·m·v² = ½·10·6.5² = 211.3 J
Erot = ½·I·ω² = ½·0.6667·m·r²·(v/r)² = 0.6667·211.3 = 140.8 J

Total

Ek = 211.3 + 140.8 = 352.1 J

Answer

Ek = 352.1 J
15.Gears & gear trains

Answer: n2 = 372.5 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1440·80/300 = 384 rpm

With slip

n2 = 384·0.97 = 372.5 rpm

Answer

n2 = 372.5 rpm
16.Gears & gear trains

Answer: P = 8.124 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.384 rad

Slack-side tension

eμθ = e0.5959 = 1.815, T₂ = 1500/1.815 = 826.6 N

Power

P = (1500 − 826.6)·12.06 = 8.124 kW

Answer

P = 8.124 kW
17.Springs & pendulums

Answer: L = 2.09 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.9/2π)² = 2.09 m

Answer

L = 2.09 m
18.Springs & pendulums

Answer: vmax = 1.037 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(370/2.2) = 12.97 rad/s

Maximum speed

vmax = A·ω = 0.08·12.97 = 1.037 m/s

Answer

vmax = 1.037 m/s
19.Mechanical vibrations

Answer: ζ = 0.01998

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(50/44.1) = 0.1256

Damping ratio

ζ = δ/√(4π² + δ²) = 0.1256/√(39.48 + 0.01577) = 0.01998

Answer

ζ = 0.01998
20.Mechanical vibrations

Answer: fn = 3.183 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/12 + 1/60 → keq = 12·60/(12 + 60) = 10 kN/m

Natural frequency

ωn = √(10000/25) = 20 rad/s
fn = 20/(2π) = 3.183 Hz

Answer

fn = 3.183 Hz

ExamProblems · examproblems.com/courses/dynamics