Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
policea = 3.5 m/s²car29 m/s

A car speeding at a constant 29 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 29 m/sapolice = 3.5 m/s²v0,police = 0
d = m
2.KinematicsHard
v₀ = 20 m/s15 m

A ball is thrown straight up at 20 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 20 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 25°a = ?m = 15 kg

A 15 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 15 kgθ = 25°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 2.5 kg6 kgμ = 0.3

A 2.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 6 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 2.5 kgm2 = 6 kgμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
15 my = ?v0​ = 16 m/s55°

A ball is kicked from level ground at 16 m/s and 55° above the horizontal towards a wall 15 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 16 m/sθ = 55°x = 15 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 45 mv0​ = 17 m/s20°range

A ball is launched at 20° above horizontal from the top of a 45 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 17 m/sθ = 20°h = 45 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 75 mvmax​ = ?

A car drives over the top of a hump in the road, which is a circular arc of radius 75 m. Use g = 9.81 m/s². Above what speed vmax do the wheels leave the road at the top?

r = 75 mg = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 2 mh = ?

A small cart is released from rest on a frictionless track and runs into a vertical loop of radius 2 m. From what minimum height hmin above the bottom of the loop must it start to stay on the track at the top of the loop?

R = 2 mv₀ = 0
hmin = m
9.Work & energyMedium
35°d = 14 mμ = 0.4

A 10 kg block slides 14 m down a slope at 35° to the horizontal, with a coefficient of kinetic friction of 0.4. Find the work Wf done against friction.

m = 10 kgθ = 35°μ = 0.4d = 14 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 10 mR = 2.5 mN = ?

A 10 kg cart is released from rest at a height of 10 m on a smooth track that leads into a vertical circular loop of radius 2.5 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 10 kgh = 10 mR = 2.5 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
0.5 kg11 m/s3 kg

A 0.5 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 3 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 0.5 kgm2 = 3 kgv1 = 11 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
26 m/s9 m/s

A 0.4 kg ball hits a wall at 26 m/s and bounces straight back at 9 m/s. The contact lasts 20 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.4 kgvin = 26 m/svout = 9 m/sΔt = 20 ms
J = N·s
13.Rigid-body rotationMedium
n = 2800 rpmP = 146 kW

A shaft transmits 146 kW at 2800 rpm. Find the torque T in the shaft.

P = 146 kWn = 2800 rpm
T = N·m
14.Rigid-body rotationHard
θ = 40°vs = 3.5 m

A thin hoop starts from rest and rolls without slipping down a slope inclined at 40° to the horizontal. Use g = 9.81 m/s². Find its speed v after it has rolled 3.5 m along the slope.

θ = 40°s = 3.5 mI = m·r²g = 9.81 m/s²
v = m/s
15.Gears & gear trainsMedium
N1​ = 40N2​ = 60

A 4 kW motor running at 960 rpm drives a pinion with 40 teeth, which meshes with a gear with 60 teeth. Ignore losses. Find the output torque T2 on the gear shaft.

P = 4 kWn1 = 960 rpmN1 = 40N2 = 60η = 100%
T2 = N·m
16.Gears & gear trainsHard
d1​ = 200 mmd2​ = 300 mm1450 rpmC = 600 mmT1​ = 800 NT2​P = ?

An open belt connects a 200 mm driving pulley at 1450 rpm to a 300 mm pulley; the centres are 600 mm apart. The coefficient of friction is 0.25 and the tight-side tension may not exceed 800 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 200 mmn1 = 1450 rpmd2 = 300 mmC = 600 mmμ = 0.25T1 = 800 N
P = kW
17.Springs & pendulumsMedium
L = 1.6 mT = 1.6 s

An astronaut on another planet finds that a simple pendulum 1.6 m long has a period of 1.6 s for small swings. Find the gravitational acceleration g on that planet.

L = 1.6 mT = 1.6 s
g = m/s²
18.Springs & pendulumsHard
1.9 kgk = 250 N/mA = 6 cm

A 1.9 kg mass on a spring with k = 250 N/m is pulled 6 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 1.9 kgk = 250 N/mA = 6 cm
E = J
19.Mechanical vibrationsMedium
k = 80 kN/mc = 330 N·s/mm = 15 kg

A 15 kg mass is supported by a spring with a stiffness of 80 kN/m and a viscous damper with a damping coefficient of 330 N·s/m. Find the damping ratio ζ.

m = 15 kgk = 80 kN/mc = 330 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 60m = 50 kg

A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 30 kN/m and k₂ = 60 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 50 kgk1 = 30 kN/mk2 = 60 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: d = 480.6 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·29/3.5 = 16.57 s

Distance

d = v·t = 29·16.57 = 480.6 m

Answer

d = 480.6 m

At that moment the police car moves at 2v = 58 m/s.

2.Kinematics

Answer: t = 4.725 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−15 = 20·t − ½·9.81·t²
4.905·t² − 20·t − 15 = 0

Solve the quadratic

Only the positive root is physical.

t = (20 + √(20² + 2·9.81·15))/9.81 = 4.725 s

Answer

t = 4.725 s
3.Newton’s laws

Answer: a = 2.812 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0.15·cos 25°) = 9.81·(0.4226 − 0.1359) = 2.812 m/s²

Answer

a = 2.812 m/s²
4.Newton’s laws

Answer: T = 22.51 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (58.86 − 7.357)/8.5 = 6.059 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 2.5·6.059 + 7.357 = 22.51 N

Answer

T = 22.51 N
5.Projectile motion

Answer: y = 8.318 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 16·cos 55° = 9.177 m/s
t = x/vx = 15/9.177 = 1.634 s

Height at that time

y = 13.11·1.634 − ½·9.81·1.634² = 8.318 m

Answer

y = 8.318 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: t = 3.679 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 17·cos 20° = 15.97 m/s
vy = v0·sin θ = 17·sin 20° = 5.814 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 45 + 5.814·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (5.814 + √(33.81 + 882.9))/9.81 = 3.679 s

Answer

t = 3.679 s
7.Circular motion

Answer: vmax = 27.12 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Normal force zero

m·g = m·v²/r → v = √(g·r) = √(9.81·75) = 27.12 m/s

Answer

vmax = 27.12 m/s
(97.65 km/h)
8.Circular motion

Answer: hmin = 5 m

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Condition at the top

m·g = m·v²/R → v² = g·R

Energy conservation

g·h = g·2R + ½·g·R → h = 2.5·R = 2.5·2 = 5 m

Answer

hmin = 5 m
9.Work & energy

Answer: Wf = 450 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 98.1·0.8192 = 80.36 N
F = μN = 0.4·80.36 = 32.14 N

Work against friction

Wf = F·d = 32.14·14 = 450 J

Answer

Wf = 450 J
10.Work & energy

Answer: N = 294.3 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(10 − 5) = 98.1 m²/s²

Forces at the top

m·g = 10·9.81 = 98.1 N
N = mv²/R − mg = 10·98.1/2.5 − 98.1 = 294.3 N

Answer

N = 294.3 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′2 = 3.143 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (0.5 − 3)/(0.5 + 3)·11 = −7.857 m/s
v′2 = 2·0.5/(0.5 + 3)·11 = 3.143 m/s

Answer

v′2 = 3.143 m/s
12.Momentum & collisions

Answer: J = 14 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.4·(9 + 26) = 14 N·s

Answer

J = 14 N·s
13.Rigid-body rotation

Answer: T = 497.9 N·m

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2800/60 = 293.2 rad/s

Torque

T = P/ω = 146000/293.2 = 497.9 N·m

Answer

T = 497.9 N·m
14.Rigid-body rotation

Answer: v = 4.698 m/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 3.5·sin 40° = 2.25 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 1)
v = √(2·9.81·2.25/2) = 4.698 m/s

Answer

v = 4.698 m/s
15.Gears & gear trains

Answer: T2 = 59.68 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 4000/100.5 = 39.79 N·m

Output torque

T2 = 39.79·60/40·1 = 59.68 N·m

Answer

T2 = 59.68 N·m
16.Gears & gear trains

Answer: P = 6.373 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.975 rad

Slack-side tension

eμθ = e0.7437 = 2.104, T₂ = 800/2.104 = 380.3 N

Power

P = (800 − 380.3)·15.18 = 6.373 kW

Answer

P = 6.373 kW
17.Springs & pendulums

Answer: g = 24.67 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for g

g = 4π²·L/T² = 4π²·1.6/1.6² = 24.67 m/s²

Answer

g = 24.67 m/s²
18.Springs & pendulums

Answer: E = 0.45 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(250/1.9) = 11.47 rad/s

Energy

E = ½·k·A² = ½·250·0.06² = 0.45 J

Answer

E = 0.45 J
19.Mechanical vibrations

Answer: ζ = 0.1506

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(80000·15) = 2191 N·s/m

Damping ratio

ζ = c/cc = 330/2191 = 0.1506

Answer

ζ = 0.1506

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: keq = 90 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 30 + 60 = 90 kN/m

Answer

keq = 90 kN/m

ExamProblems · examproblems.com/courses/dynamics