Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)1.667 s12.5

A car driving at 45 km/h brakes with a constant deceleration of 7.5 m/s² until it stops. Find the braking distance s.

v₀ = 45 km/ha = −7.5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 9 m/s40 m

A ball is thrown straight up at 9 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 9 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 30°a = ?m = 15 kg

A 15 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 15 kgθ = 30°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 1 kg7 kgθ = 40°

A 1 kg block on a ramp at 40° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 7 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 1 kgm2 = 7 kgθ = 40°μ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 18 m/s25°range

A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 18 m/sθ = 25°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 5 mv0​ = 33 m/s50°range

A ball is launched at 50° above horizontal from the top of a 5 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 33 m/sθ = 50°h = 5 mg = 9.81 m/s²
t = s
7.Circular motionMedium
r = 115 mvmax​ = ?

A car takes a flat curve of radius 115 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 115 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 1 mh = 4.1 m

A 2.5 kg cart is released from rest at a height of 4.1 m on a frictionless track and runs through a vertical loop of radius 1 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 2.5 kgh = 4.1 mR = 1 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
20°d = 18 mμ = 0.1

A 0.5 kg block slides 18 m down a slope at 20° to the horizontal, with a coefficient of kinetic friction of 0.1. Find the work Wf done against friction.

m = 0.5 kgθ = 20°μ = 0.1d = 18 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 4.5 mR = 1 mv = ?

A 0.5 kg cart is released from rest at a height of 4.5 m on a smooth track that leads into a vertical circular loop of radius 1 m. Find the speed v of the cart at the top of the loop.

m = 0.5 kgh = 4.5 mR = 1 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
700 kg21 m/s1600 kg

A 700 kg car moving at 21 m/s runs into a stationary 1600 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 700 kgv1 = 21 m/sm2 = 1600 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
1200 kg10 m/s1100 kg16 m/sθ = ?

At a crossing a 1200 kg car travelling east at 10 m/s collides with a 1100 kg car travelling north at 16 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 1200 kgv1 = 10 m/s (E)m2 = 1100 kgv2 = 16 m/s (N)
θ = °
13.Rigid-body rotationMedium
n = 1100 rpmT = 180 N·m

A motor delivers a torque of 180 N·m at 1100 rpm. Find its power output P in kW.

T = 180 N·mn = 1100 rpm
P = kW
14.Rigid-body rotationHard
180 m/s15 g1.13 mL = 1.2 m10 kg

A uniform slender rod of mass 10 kg and length 1.2 m hangs at rest from a frictionless pivot at its top end. A 15 g bullet moving horizontally at 180 m/s hits the rod 1.13 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 10 kgL = 1.2 mm = 15 gv = 180 m/sd = 1.13 m
ω = rad/s
15.Gears & gear trainsMedium
d1​ = 80 mmd2​ = 200 mm1440 rpmT1​ = 1000 NT2​ = 200 NP = ?

A belt runs on an 80 mm driving pulley at 1440 rpm. The tension is 1000 N on the tight side and 200 N on the slack side. Find the power P transmitted, in kW.

d1 = 80 mmn1 = 1440 rpmT1 = 1000 NT2 = 200 N
P = kW
16.Gears & gear trainsHard
A = 25B = 30C = 15D = 80

In a compound gear train, gear A (25 teeth) on the input shaft turning at 1440 rpm drives gear B (30 teeth). Gear C (15 teeth) is fixed to the same shaft as B and drives gear D (80 teeth) on the output shaft. Find the output speed nout.

nin = 1440 rpmA = 25B = 30C = 15D = 80
nout = rpm
17.Springs & pendulumsMedium
L = 2.8 m

A simple pendulum has a length of 2.8 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.8 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
0.8 kgk = 40 N/mA = 15 cm

A 0.8 kg mass on a spring with k = 40 N/m is pulled 15 cm from equilibrium and released. Find its maximum speed vmax.

m = 0.8 kgk = 40 N/mA = 15 cm
vmax = m/s
19.Mechanical vibrationsMedium
tx30 mm4 cycles0.7 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 30 mm is followed 4 cycles later by a peak of 0.7 mm. Find the damping ratio ζ.

x0 = 30 mmx4 = 0.7 mmn = 4
ζ =
20.Mechanical vibrationsHard
k1​ = 15k2​ = 100k3​ = 15m = 100 kg

A 100 kg mass hangs from spring k₃ = 15 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 15 kN/m and k₂ = 100 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 15 kN/mk2 = 100 kN/mk3 = 15 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 10.42 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·7.5) = 10.42 m

Answer

s = 10.42 m
2.Kinematics

Answer: t = 3.917 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−40 = 9·t − ½·9.81·t²
4.905·t² − 9·t − 40 = 0

Solve the quadratic

Only the positive root is physical.

t = (9 + √(9² + 2·9.81·40))/9.81 = 3.917 s

Answer

t = 3.917 s
3.Newton’s laws

Answer: a = 2.356 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.3·cos 30°) = 9.81·(0.5 − 0.2598) = 2.356 m/s²

Answer

a = 2.356 m/s²
4.Newton’s laws

Answer: a = 7.702 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 68.67 N
m₁·g·sin θ = 6.306 N
μ·m₁·g·cos θ = 0.7515 N

Acceleration of the system

a = (68.67 − 6.306 − 0.7515)/8 = 7.702 m/s²

Answer

a = 7.702 m/s²
5.Projectile motion

Answer: t = 1.551 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 18·cos 25° = 16.31 m/s
vy = v0·sin θ = 18·sin 25° = 7.607 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·7.607/9.81 = 1.551 s

Answer

t = 1.551 s
6.Projectile motion

Answer: t = 5.345 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 33·cos 50° = 21.21 m/s
vy = v0·sin θ = 33·sin 50° = 25.28 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 5 + 25.28·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (25.28 + √(639.1 + 98.1))/9.81 = 5.345 s

Answer

t = 5.345 s
7.Circular motion

Answer: vmax = 26.02 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·115) = 26.02 m/s

Answer

vmax = 26.02 m/s (93.66 km/h)
8.Circular motion

Answer: Nbottom = 225.6 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·4.1 = 80.44 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 2.5·80.44/1 + 24.53 = 225.6 N

Answer

Nbottom = 225.6 N
9.Work & energy

Answer: Wf = 8.297 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 4.905·0.9397 = 4.609 N
F = μN = 0.1·4.609 = 0.4609 N

Work against friction

Wf = F·d = 0.4609·18 = 8.297 J

Answer

Wf = 8.297 J
10.Work & energy

Answer: v = 7.004 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(4.5 − 2) = 49.05 m²/s²
v = 7.004 m/s

Answer

v = 7.004 m/s

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: ΔK = 107374 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 700·21/2300 = 6.391 m/s

Kinetic energy before and after

Kbefore = ½·700·21² = 154350 J
Kafter = ½·2300·6.391² = 46976 J

Energy lost

ΔK = 154350 − 46976 = 107374 J

Answer

ΔK = 107374 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: θ = 55.71 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1200·10 = 12000 kg·m/s
py = 1100·16 = 17600 kg·m/s

Direction

tan θ = py/px = 1.467 → θ = 55.71°

Answer

θ = 55.71°
13.Rigid-body rotation

Answer: P = 20.73 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·1100/60 = 115.2 rad/s

Power

P = T·ω = 180·115.2 = 20735 W = 20.73 kW

Answer

P = 20.73 kW
14.Rigid-body rotation

Answer: ω = 0.6331 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 10·1.2²/3 + 0.015·1.13² = 4.819 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.015·180·1.13/4.819 = 0.6331 rad/s

Answer

ω = 0.6331 rad/s
15.Gears & gear trains

Answer: P = 4.825 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 6.032 m/s

Power

P = (1000 − 200)·6.032 = 4825 W = 4.825 kW

Answer

P = 4.825 kW
16.Gears & gear trains

Answer: nout = 225 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1440·25/30 = 1200 rpm = nC

Second stage

nout = 1200·15/80 = 225 rpm

Answer

nout = 225 rpm

total ratio = 6.4 : 1

17.Springs & pendulums

Answer: T = 3.357 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.8/9.81) = 3.357 s

Answer

T = 3.357 s
18.Springs & pendulums

Answer: vmax = 1.061 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(40/0.8) = 7.071 rad/s

Maximum speed

vmax = A·ω = 0.15·7.071 = 1.061 m/s

Answer

vmax = 1.061 m/s
19.Mechanical vibrations

Answer: ζ = 0.1479

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(30/0.7) = 0.9395

Damping ratio

ζ = δ/√(4π² + δ²) = 0.9395/√(39.48 + 0.8826) = 0.1479

Answer

ζ = 0.1479
20.Mechanical vibrations

Answer: fn = 1.833 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 15 + 100 = 115 kN/m
keq = 115·15/(115 + 15) = 13.27 kN/m

Natural frequency

ωn = √(13269/100) = 11.52 rad/s
fn = 11.52/(2π) = 1.833 Hz

Answer

fn = 1.833 Hz

ExamProblems · examproblems.com/courses/dynamics