Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.778 s12.5

A car driving at 45 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. Find the braking distance s.

v₀ = 45 km/ha = −4.5 m/s²v = 0
s = m
2.KinematicsHard
AB: 28 m/s20 m

Ball A is dropped from rest from a height of 20 m. At the same instant ball B is thrown straight up from the ground directly below at 28 m/s. Ignore air resistance and use g = 9.81 m/s². When do the balls meet? Find t.

H = 20 mv0B = 28 m/sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 45°a = ?m = 17 kg

A 17 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 17 kgθ = 45°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 4 kg4.5 kgμ = 0.2

A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4.5 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 4 kgm2 = 4.5 kgμ = 0.2g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 36 m/s45°range

A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 36 m/sθ = 45°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 30 mv0​ = 10 m/s40°α = ?

A ball is launched at 10 m/s and 40° above the horizontal from the top of a 30 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 10 m/sθ = 40°h = 30 mg = 9.81 m/s²
α = °
7.Circular motionMedium
L = 1.9 m60°

A small ball on a string of length 1.9 m moves in a horizontal circle so that the string makes a constant angle of 60° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.

L = 1.9 mθ = 60°g = 9.81 m/s²
T = s
8.Circular motionHard
R = 9 mh = 45 m

A 2 kg cart is released from rest at a height of 45 m on a frictionless track and runs through a vertical loop of radius 9 m. Use g = 9.81 m/s². Find the normal force Ntop of the track on the cart at the top of the loop.

m = 2 kgh = 45 mR = 9 mg = 9.81 m/s²
Ntop = N
9.Work & energyMedium
54 km/h4°1800 kg

A 1800 kg car drives up a 4° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 700 N. Find the power P the wheels must deliver, in kW.

m = 1800 kgθ = 4°Fr = 700 Nv = 54 km/hg = 9.81 m/s²
P = kW
10.Work & energyHard
h = 2 mL = 3.5 mμ = 0.2k = 2500 N/m

A 0.5 kg block is released from rest at height 2 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.2) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.

m = 0.5 kgh = 2 mL = 3.5 mμ = 0.2k = 2500 N/mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1.5 kg11 m/s4.5 kg

A 1.5 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 1.5 kgm2 = 4.5 kgv1 = 11 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
4.5 kgv = ?5 g10°L = 1.1 m

A 5 g bullet is fired horizontally into a 4.5 kg block hanging from light strings 1.1 m long, and stays in it. The strings swing out to a largest angle of 10° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 5 gM = 4.5 kgL = 1.1 mθ = 10°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
n = 2700 rpmT = 1460 N·m

A motor delivers a torque of 1460 N·m at 2700 rpm. Find its power output P in kW.

T = 1460 N·mn = 2700 rpm
P = kW
14.Rigid-body rotationHard
0.65 m0.35 mn1​ = 40 rpm

A person stands on a frictionless turntable and holds a 3.5 kg dumbbell in each hand, 0.65 m from the axis. The person and turntable alone have a moment of inertia of 2 kg·m² about the axis. They turn at 40 rpm, then pull the dumbbells in to 0.35 m from the axis. Treat the dumbbells as point masses. Find the new speed n2 in rpm.

I0 = 2 kg·m²m = 2 × 3.5 kgr1 = 0.65 mr2 = 0.35 mn1 = 40 rpm
n2 = rpm
15.Gears & gear trainsMedium
N1​ = 15N2​ = 40

An 11 kW motor running at 2900 rpm drives a pinion with 15 teeth, which meshes with a gear with 40 teeth. Ignore losses. Find the output torque T2 on the gear shaft.

P = 11 kWn1 = 2900 rpmN1 = 15N2 = 40η = 100%
T2 = N·m
16.Gears & gear trainsHard
d1​ = 200 mmd2​ = 500 mm1450 rpmC = 800 mmT1​ = 800 NT2​P = ?

An open belt connects a 200 mm driving pulley at 1450 rpm to a 500 mm pulley; the centres are 800 mm apart. The coefficient of friction is 0.35 and the tight-side tension may not exceed 800 N. Find the largest power P the belt can transmit without slipping, in kW (ignore centrifugal effects).

d1 = 200 mmn1 = 1450 rpmd2 = 500 mmC = 800 mmμ = 0.35T1 = 800 N
P = kW
17.Springs & pendulumsMedium
L = 2.9 m

A simple pendulum has a length of 2.9 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.9 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
1.1 kgk = 320 N/m

A 1.1 kg mass is attached to the lower end of an unstretched vertical spring with k = 320 N/m and released from rest. Use g = 9.81 m/s². Find the greatest extension xmax of the spring in cm.

m = 1.1 kgk = 320 N/mg = 9.81 m/s²
xmax = cm
19.Mechanical vibrationsMedium
tx10 mm1 cycle4.7 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 10 mm is followed one cycle later by a peak of 4.7 mm. Find the damping ratio ζ.

x0 = 10 mmx1 = 4.7 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 30k2​ = 10m = 50 kg

A 50 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 10 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 50 kgk1 = 30 kN/mk2 = 10 kN/m
keq = kN/m

3Solutions

1.Kinematics

Answer: s = 17.36 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·4.5) = 17.36 m

Answer

s = 17.36 m
2.Kinematics

Answer: t = 0.7143 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Meeting time

Up is positive, the ground is y = 0.

20 − ½g·t² = 28·t − ½g·t² → t = 20/28 = 0.7143 s

Answer

t = 0.7143 s
3.Newton’s laws

Answer: a = 5.203 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.25·cos 45°) = 9.81·(0.7071 − 0.1768) = 5.203 m/s²

Answer

a = 5.203 m/s²
4.Newton’s laws

Answer: a = 4.27 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (44.15 − 7.848)/8.5 = 4.27 m/s²

Answer

a = 4.27 m/s²
5.Projectile motion

Answer: t = 5.19 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 36·cos 45° = 25.46 m/s
vy = v0·sin θ = 36·sin 45° = 25.46 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·25.46/9.81 = 5.19 s

Answer

t = 5.19 s
6.Projectile motion

Answer: α = 73.03 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 10·cos 40° = 7.66 m/s
vy0 = 10·sin 40° = 6.428 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(6.428² + 2·9.81·30) = 25.1 m/s

Impact angle

tan α = vy/vx = 25.1/7.66 → α = 73.03°

Answer

α = 73.03°
7.Circular motion

Answer: T = 1.955 s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 1.9·sin 60° = 1.645 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(1.645·9.81·tan 60°) = 5.288 m/s

Period

T = 2π·r/v = 2π·1.645/5.288 = 1.955 s

Answer

T = 1.955 s
8.Circular motion

Answer: Ntop = 98.1 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·(45 − 2·9) = 529.7 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R − m·g = 2·529.7/9 − 19.62 = 98.1 N

Answer

Ntop = 98.1 N
9.Work & energy

Answer: P = 28.98 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1800·9.81 = 17658 N
mg·sin θ = 17658·sin 4° = 1232 N
F = 1232 + 700 = 1932 N

Power

v = 54/3.6 = 15 m/s
P = F·v = 1932·15 = 28976 W = 28.98 kW

Answer

P = 28.98 kW
10.Work & energy

Answer: v = 5.05 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(2 − 0.2·3.5) = 6.376 J

Speed at the spring

½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·1.3) = 5.05 m/s

Answer

v = 5.05 m/s
11.Momentum & collisions

Answer: v′1 = −5.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1.5 − 4.5)/(1.5 + 4.5)·11 = −5.5 m/s
v′2 = 2·1.5/(1.5 + 4.5)·11 = 5.5 m/s

Answer

v′1 = −5.5 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: v = 515.9 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1.1·(1 − cos 10°) = 0.01671 m

Speed after impact

V = √(2·9.81·0.01671) = 0.5726 m/s

Collision

v = (m + M)·V/m = 4.505·0.5726/0.005 = 515.9 m/s

Answer

v = 515.9 m/s
13.Rigid-body rotation

Answer: P = 412.8 kW

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2700/60 = 282.7 rad/s

Power

P = T·ω = 1460·282.7 = 412805 W = 412.8 kW

Answer

P = 412.8 kW
14.Rigid-body rotation

Answer: n2 = 69.4 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = 2 + 2·3.5·0.65² = 4.957 kg·m²
I2 = 2 + 2·3.5·0.35² = 2.857 kg·m²

Conservation of angular momentum

n2 = n1·I1/I2 = 40·4.957/2.857 = 69.4 rpm

Answer

n2 = 69.4 rpm

The kinetic energy increases: the extra energy comes from the work the person does pulling the dumbbells in.

15.Gears & gear trains

Answer: T2 = 96.59 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·2900/60 = 303.7 rad/s
T1 = P/ω₁ = 11000/303.7 = 36.22 N·m

Output torque

T2 = 36.22·40/15·1 = 96.59 N·m

Answer

T2 = 96.59 N·m
16.Gears & gear trains

Answer: P = 7.531 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Angle of wrap

θ = 2.764 rad

Slack-side tension

eμθ = e0.9675 = 2.631, T₂ = 800/2.631 = 304 N

Power

P = (800 − 304)·15.18 = 7.531 kW

Answer

P = 7.531 kW
17.Springs & pendulums

Answer: T = 3.416 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.9/9.81) = 3.416 s

Answer

T = 3.416 s
18.Springs & pendulums

Answer: xmax = 6.744 cm

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Equilibrium and amplitude

x₀ = m·g/k = 1.1·9.81/320 = 0.03372 m = A

Lowest point

xmax = 2A = 0.06744 m = 6.744 cm

Answer

xmax = 6.744 cm
19.Mechanical vibrations

Answer: ζ = 0.1193

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(10/4.7) = 0.755

Damping ratio

ζ = δ/√(4π² + δ²) = 0.755/√(39.48 + 0.5701) = 0.1193

Answer

ζ = 0.1193
20.Mechanical vibrations

Answer: keq = 7.5 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/30 + 1/10 → keq = 30·10/(30 + 10) = 7.5 kN/m

Answer

keq = 7.5 kN/m

ExamProblems · examproblems.com/courses/dynamics