Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.571 s12.5

A car driving at 45 km/h brakes with a constant deceleration of 3.5 m/s² until it stops. Find the braking distance s.

v₀ = 45 km/ha = −3.5 m/s²v = 0
s = m
2.KinematicsHard
t (s)v (m/s)4 s

A tram starts from rest and accelerates at 1.5 m/s² for 4 s, then runs at constant speed for 16 s, and finally brakes at 4 m/s² until it stops. Find the total travel time t.

a1 = 1.5 m/s²t1 = 4 st2 = 16 sa3 = −4 m/s²
t = s
3.Newton’s lawsMedium
θ = 40°a = ?m = 8 kg

An 8 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 8 kgθ = 40°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 3.5 kg4.5 kgμ = 0.3

A 3.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4.5 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 3.5 kgm2 = 4.5 kgμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 26 m/s20°range

A ball is launched at 20° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 26 m/sθ = 20°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 15 mv0​ = 20 m/s45°H = ?

A ball is launched at 20 m/s and 45° above the horizontal from the top of a 15 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 20 m/sθ = 45°h = 15 mg = 9.81 m/s²
H = m
7.Circular motionMedium
L = 0.4 m45°

A small ball on a string of length 0.4 m moves in a horizontal circle so that the string makes a constant angle of 45° with the vertical (a conical pendulum). Use g = 9.81 m/s². Find the time T for one revolution.

L = 0.4 mθ = 45°g = 9.81 m/s²
T = s
8.Circular motionHard
θ = 20°to centrevmax​ = ?

A curve of radius 100 m is banked at 20°, and the coefficient of static friction between tyres and road is 0.4. Use g = 9.81 m/s². Find the highest speed vmax at which a car can take the curve without sliding up and out.

r = 100 mθ = 20°μs = 0.4g = 9.81 m/s²
vmax = m/s
9.Work & energyMedium
25°d = 12 mμ = 0.3

A 2 kg block slides 12 m down a slope at 25° to the horizontal, with a coefficient of kinetic friction of 0.3. Find the work Wf done against friction.

m = 2 kgθ = 25°μ = 0.3d = 12 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 4 mL = 4 mμ = 0.2k = 1000 N/m

A 5 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.2) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 5 kgh = 4 mL = 4 mμ = 0.2k = 1000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
2 kg11 m/s4.5 kg

A 2 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.

m1 = 2 kgm2 = 4.5 kgv1 = 11 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
12 m/s9 m/s

A 0.1 kg ball hits a wall at 12 m/s and bounces straight back at 9 m/s. The contact lasts 20 ms. Find the average force Favg of the wall on the ball.

m = 0.1 kgvin = 12 m/svout = 9 m/sΔt = 20 ms
Favg = N
13.Rigid-body rotationMedium
L = 0.9 mm = 19 kgα

A uniform slender rod of mass 19 kg and length 0.9 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the vertical force R that the pin exerts on the rod just after release.

m = 19 kgL = 0.9 mg = 9.81 m/s²
R = N
14.Rigid-body rotationHard
θ = 20°as = 3 m

A hollow sphere rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 3 m down the slope?

θ = 20°I = (2/3)·m·r²g = 9.81 m/s²s = 3 m
t = s
15.Gears & gear trainsMedium
Tw​ = ?z = 4, 960 rpm

A 0.37 kW motor at 960 rpm drives a worm with 4 start(s). The worm wheel has 50 teeth and the drive has an efficiency of 75%. Find the output torque Tw on the wheel shaft.

z = 4Nw = 50n = 960 rpmP = 0.37 kWη = 75%
Tw = N·m
16.Gears & gear trainsHard
A = 16B = 60C = 45D = ?

In a compound gear train, gear A (16 teeth) on the input shaft turns at 960 rpm and drives gear B (60 teeth). Gear C (45 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 192 rpm. How many teeth ND must gear D have?

nin = 960 rpmA = 16B = 60C = 45nout = 192 rpm
ND =
17.Springs & pendulumsMedium
L = 2.1 m

A simple pendulum has a length of 2.1 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.1 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
2.7 kgk = 440 N/mA = 7 cm

A 2.7 kg mass on a spring with k = 440 N/m is pulled 7 cm from equilibrium and released. Find its maximum speed vmax.

m = 2.7 kgk = 440 N/mA = 7 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 40 kN/mζ = 0.7m = 200 kg

A 200 kg mass on a spring with a stiffness of 40 kN/m has a viscous damper giving a damping ratio of 0.7. Find the damped natural frequency fd of its free vibration in Hz.

m = 200 kgk = 40 kN/mζ = 0.7
fd = Hz
20.Mechanical vibrationsHard
k1​ = 60k2​ = 100m = 10 kg

A 10 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 60 kN/m and the lower one k₂ = 100 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 60 kN/mk2 = 100 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 22.32 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 45/3.6 = 12.5 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·3.5) = 22.32 m

Answer

s = 22.32 m
2.Kinematics

Answer: t = 21.5 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Top speed

v = a1·t1 = 1.5·4 = 6 m/s

Braking time

t3 = v/a3 = 6/4 = 1.5 s

Total time

t = 4 + 16 + 1.5 = 21.5 s

Answer

t = 21.5 s
3.Newton’s laws

Answer: a = 5.179 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.15·cos 40°) = 9.81·(0.6428 − 0.1149) = 5.179 m/s²

Answer

a = 5.179 m/s²
4.Newton’s laws

Answer: a = 4.231 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (44.15 − 10.3)/8 = 4.231 m/s²

Answer

a = 4.231 m/s²
5.Projectile motion

Answer: t = 1.813 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 26·cos 20° = 24.43 m/s
vy = v0·sin θ = 26·sin 20° = 8.893 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·8.893/9.81 = 1.813 s

Answer

t = 1.813 s
6.Projectile motion

Answer: H = 25.19 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 20·sin 45° = 14.14 m/s

Rise above the cliff

Δh = vy²/(2g) = 14.14²/(2·9.81) = 10.19 m

Height above the ground

H = 15 + 10.19 = 25.19 m

Answer

H = 25.19 m
7.Circular motion

Answer: T = 1.067 s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Radius of the circle

r = L·sin θ = 0.4·sin 45° = 0.2828 m

Speed

Tension and gravity together give the inward force: tan θ = v²/(r·g).

v = √(r·g·tan θ) = √(0.2828·9.81·tan 45°) = 1.666 m/s

Period

T = 2π·r/v = 2π·0.2828/1.666 = 1.067 s

Answer

T = 1.067 s
8.Circular motion

Answer: vmax = 29.62 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balances

Friction points down the slope.

N·(sin θ + μ·cos θ) = m·v²/r
N·(cos θ − μ·sin θ) = m·g

Speed

v = √(100·9.81·0.7179/0.8029) = 29.62 m/s

Answer

vmax = 29.62 m/s
(106.6 km/h)
9.Work & energy

Answer: Wf = 64.01 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 19.62·0.9063 = 17.78 N
F = μN = 0.3·17.78 = 5.335 N

Work against friction

Wf = F·d = 5.335·12 = 64.01 J

Answer

Wf = 64.01 J
10.Work & energy

Answer: x = 56.03 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 49.05·(4 − 0.2·4) = 157 J

Maximum compression

½kx² = 157 → x = √(2·157/1000) = 0.5603 m = 56.03 cm

Answer

x = 56.03 cm
11.Momentum & collisions

Answer: v′2 = 6.769 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2 − 4.5)/(2 + 4.5)·11 = −4.231 m/s
v′2 = 2·2/(2 + 4.5)·11 = 6.769 m/s

Answer

v′2 = 6.769 m/s
12.Momentum & collisions

Answer: Favg = 105 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.1·(9 + 12) = 2.1 N·s

Average force

Favg = J/Δt = 2.1/0.02 = 105 N

Answer

Favg = 105 N
13.Rigid-body rotation

Answer: R = 46.6 N

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·0.9) = 16.35 rad/s²

Vertical forces

aG = α·L/2 = 7.357 m/s²
m·g − R = m·aG → R = 19·(9.81 − 7.357) = 46.6 N

Answer

R = 46.6 N

R = m·g/4, independent of the length.

14.Rigid-body rotation

Answer: t = 1.726 s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.6667·m·r²·(a/r) → f = 0.6667·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 20°/1.667 = 2.013 m/s²

Time

s = ½·a·t² → t = √(2·3/2.013) = 1.726 s

Answer

t = 1.726 s
15.Gears & gear trains

Answer: Tw = 34.5 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 960·4/50 = 76.8 rpm

Output torque

ωw = 2π·76.8/60 = 8.042 rad/s
Tw = η·P/ωw = 0.75·370/8.042 = 34.5 N·m

Answer

Tw = 34.5 N·m
16.Gears & gear trains

Answer: ND = 60

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 960·16/60 = 256 rpm

Teeth on gear D

ND = C·nC/nout = 45·256/192 = 60

Answer

ND = 60
17.Springs & pendulums

Answer: T = 2.907 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.1/9.81) = 2.907 s

Answer

T = 2.907 s
18.Springs & pendulums

Answer: vmax = 0.8936 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(440/2.7) = 12.77 rad/s

Maximum speed

vmax = A·ω = 0.07·12.77 = 0.8936 m/s

Answer

vmax = 0.8936 m/s
19.Mechanical vibrations

Answer: fd = 1.607 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(40000/200) = 14.14 rad/s
fn = 14.14/(2π) = 2.251 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 2.251·√(1 − 0.7²) = 1.607 Hz

Answer

fd = 1.607 Hz
20.Mechanical vibrations

Answer: fn = 9.746 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/60 + 1/100 → keq = 60·100/(60 + 100) = 37.5 kN/m

Natural frequency

ωn = √(37500/10) = 61.24 rad/s
fn = 61.24/(2π) = 9.746 Hz

Answer

fn = 9.746 Hz

ExamProblems · examproblems.com/courses/dynamics