Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
a = ?s = 1400 m

A plane needs a speed of 220 km/h to take off and the usable runway is 1400 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 220 km/hs = 1400 m
a = m/s²
2.KinematicsHard
a = 40 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 40 m/s² for 1.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 40 m/s²t1 = 1.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 25°a = ?m = 18 kg

An 18 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 18 kgθ = 25°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 2.5 kg1 kgμ = 0.3

A 2.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 1 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 2.5 kgm2 = 1 kgμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 40 m/s60°range

A ball is launched at 60° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 40 m/sθ = 60°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 5 mv0​ = 26 m/s70°H = ?

A ball is launched at 26 m/s and 70° above the horizontal from the top of a 5 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 26 m/sθ = 70°h = 5 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 40 mvmax​ = ?

A car takes a flat curve of radius 40 m. The coefficient of static friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 40 mμs = 0.6g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 4 mh = 16 m

A 3.5 kg cart is released from rest at a height of 16 m on a frictionless track and runs through a vertical loop of radius 4 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 3.5 kgh = 16 mR = 4 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
30°d = 15 mμ = 0.3

A 2.5 kg block slides 15 m down a slope at 30° to the horizontal, with a coefficient of kinetic friction of 0.3. Find the work Wf done against friction.

m = 2.5 kgθ = 30°μ = 0.3d = 15 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 2 mL = 2 mμ = 0.25k = 2000 N/m

A 4 kg block is released from rest at height 2 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2 m long (μ = 0.25) and then runs onto a spring (k = 2000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 4 kgh = 2 mL = 2 mμ = 0.25k = 2000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
500 kg20 m/s500 kg

A 500 kg car moving at 20 m/s runs into a stationary 500 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 500 kgv1 = 20 m/sm2 = 500 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
18 m/s20 m/s

A 0.1 kg ball hits a wall at 18 m/s and bounces straight back at 20 m/s. The contact lasts 50 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.1 kgvin = 18 m/svout = 20 m/sΔt = 50 ms
J = N·s
13.Rigid-body rotationMedium
ω = ?4 kgL = 0.9 mm = 1.5 kg

A uniform slender rod of mass 1.5 kg and length 0.9 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 4 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the angular velocity ω of the rod as it swings through the vertical position.

m = 1.5 kgL = 0.9 mmball = 4 kgg = 9.81 m/s²
ω = rad/s
14.Rigid-body rotationHard
θ = 35°vs = 4 m

A hollow sphere starts from rest and rolls without slipping down a slope inclined at 35° to the horizontal. Use g = 9.81 m/s². Its radius is 0.15 m. Find its angular velocity ω after it has rolled 4 m along the slope.

θ = 35°s = 4 mI = (2/3)·m·r²g = 9.81 m/s²r = 0.15 m
ω = rad/s
15.Gears & gear trainsMedium
d1​ = 120 mmd2​ = 200 mm960 rpmT1​ = 400 NT2​ = 120 NP = ?

A belt runs on a 120 mm driving pulley at 960 rpm. The tension is 400 N on the tight side and 120 N on the slack side. Find the power P transmitted, in kW.

d1 = 120 mmn1 = 960 rpmT1 = 400 NT2 = 120 N
P = kW
16.Gears & gear trainsHard
Ns​ = 20ring fixedNp​ = 12nc​ = ?

In a planetary gear set the sun gear has 20 teeth and each planet gear has 12 teeth. The ring gear is held fixed and the sun is driven at 1200 rpm. Find the speed nc of the planet carrier.

Ns = 20Np = 12ns = 1200 rpm
nc = rpm
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 1.8 s? Use g = 9.81 m/s². Find L.

T = 1.8 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
1 kgk = 310 N/mA = 18 cm

A 1 kg mass on a spring with k = 310 N/m is pulled 18 cm from equilibrium and released. Find its maximum acceleration amax.

m = 1 kgk = 310 N/mA = 18 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 12 kN/mζ = 0.4m = 25 kg

A 25 kg mass on a spring with a stiffness of 12 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 25 kgk = 12 kN/mζ = 0.4
fd = Hz
20.Mechanical vibrationsHard
k1​ = 60k2​ = 50m = 20 kg

A 20 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 60 kN/m and the lower one k₂ = 50 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 20 kgk1 = 60 kN/mk2 = 50 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: a = 1.334 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 220/3.6 = 61.11 m/s

Acceleration

a = v²/(2s) = 61.11²/(2·1400) = 1.334 m/s²

Answer

a = 1.334 m/s²
2.Kinematics

Answer: hmax = 228.5 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 40·1.5 = 60 m/s
h₁ = ½·40·1.5² = 45 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 60²/(2·9.81) = 183.5 m
hmax = 45 + 183.5 = 228.5 m

Answer

hmax = 228.5 m
3.Newton’s laws

Answer: a = 2.812 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0.15·cos 25°) = 9.81·(0.4226 − 0.1359) = 2.812 m/s²

Answer

a = 2.812 m/s²
4.Newton’s laws

Answer: T = 9.109 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (9.81 − 7.357)/3.5 = 0.7007 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 2.5·0.7007 + 7.357 = 9.109 N

Answer

T = 9.109 N
5.Projectile motion

Answer: t = 7.062 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 40·cos 60° = 20 m/s
vy = v0·sin θ = 40·sin 60° = 34.64 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·34.64/9.81 = 7.062 s

Answer

t = 7.062 s
6.Projectile motion

Answer: H = 35.42 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 26·sin 70° = 24.43 m/s

Rise above the cliff

Δh = vy²/(2g) = 24.43²/(2·9.81) = 30.42 m

Height above the ground

H = 5 + 30.42 = 35.42 m

Answer

H = 35.42 m
7.Circular motion

Answer: vmax = 15.34 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.6·9.81·40) = 15.34 m/s

Answer

vmax = 15.34 m/s (55.24 km/h)
8.Circular motion

Answer: Nbottom = 309 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·16 = 313.9 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 3.5·313.9/4 + 34.34 = 309 N

Answer

Nbottom = 309 N
9.Work & energy

Answer: Wf = 95.58 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 24.53·0.866 = 21.24 N
F = μN = 0.3·21.24 = 6.372 N

Work against friction

Wf = F·d = 6.372·15 = 95.58 J

Answer

Wf = 95.58 J
10.Work & energy

Answer: x = 24.26 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 39.24·(2 − 0.25·2) = 58.86 J

Maximum compression

½kx² = 58.86 → x = √(2·58.86/2000) = 0.2426 m = 24.26 cm

Answer

x = 24.26 cm
11.Momentum & collisions

Answer: ΔK/K = 50 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 500·20/1000 = 10 m/s

Kinetic energy before and after

Kbefore = ½·500·20² = 100000 J
Kafter = ½·1000·10² = 50000 J

Fraction lost

ΔK/K = 50000/100000 = 50 %

Answer

ΔK/K = 50 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: J = 3.8 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.1·(20 + 18) = 3.8 N·s

Answer

J = 3.8 N·s
13.Rigid-body rotation

Answer: ω = 4.797 rad/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 1.5·9.81·0.45 + 4·9.81·0.9 = 41.94 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 0.405 + 3.24 = 3.645 kg·m²

Energy balance

½·IO·ω² = 41.94 → ω = √(2·41.94/3.645) = 4.797 rad/s

Answer

ω = 4.797 rad/s
14.Rigid-body rotation

Answer: ω = 34.65 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 4·sin 35° = 2.294 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.6667)
v = √(2·9.81·2.294/1.667) = 5.197 m/s
ω = v/r = 5.197/0.15 = 34.65 rad/s

Answer

ω = 34.65 rad/s
15.Gears & gear trains

Answer: P = 1.689 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 6.032 m/s

Power

P = (400 − 120)·6.032 = 1689 W = 1.689 kW

Answer

P = 1.689 kW
16.Gears & gear trains

Answer: nc = 375 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 20 + 2·12 = 44

Willis equation with the ring fixed

Set nr = 0 and solve for the carrier speed.

(1200 − nc)/(0 − nc) = −44/20
nc = ns·Ns/(Ns + Nr) = 1200·20/64 = 375 rpm

Answer

nc = 375 rpm

The carrier turns in the same direction as the sun.

17.Springs & pendulums

Answer: L = 0.8051 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(1.8/2π)² = 0.8051 m

Answer

L = 0.8051 m
18.Springs & pendulums

Answer: amax = 55.8 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(310/1) = 17.61 rad/s

Maximum acceleration

amax = A·ω² = 0.18·17.61² = 55.8 m/s²

Answer

amax = 55.8 m/s²
19.Mechanical vibrations

Answer: fd = 3.196 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(12000/25) = 21.91 rad/s
fn = 21.91/(2π) = 3.487 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 3.487·√(1 − 0.4²) = 3.196 Hz

Answer

fd = 3.196 Hz
20.Mechanical vibrations

Answer: fn = 5.877 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/60 + 1/50 → keq = 60·50/(60 + 50) = 27.27 kN/m

Natural frequency

ωn = √(27273/20) = 36.93 rad/s
fn = 36.93/(2π) = 5.877 Hz

Answer

fn = 5.877 Hz

ExamProblems · examproblems.com/courses/dynamics