Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)3.75 s15

A car driving at 54 km/h brakes with a constant deceleration of 4 m/s² until it stops. Find the braking distance s.

v₀ = 54 km/ha = −4 m/s²v = 0
s = m
2.KinematicsHard
a = 28 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 28 m/s² for 2.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 28 m/s²t1 = 2.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 25°a = ?m = 12 kg

A 12 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 12 kgθ = 25°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 4 kg5 kgμ = 0.2

A 4 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 4 kgm2 = 5 kgμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = ?75°R = 115 m

A ball is launched from level ground at 75° above the horizontal and lands 115 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 75°R = 115 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 10 mv0​ = 33 m/s50°H = ?

A ball is launched at 33 m/s and 50° above the horizontal from the top of a 10 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 33 m/sθ = 50°h = 10 mg = 9.81 m/s²
H = m
7.Circular motionMedium
r = 75 mvmax​ = ?

A car takes a flat curve of radius 75 m. The coefficient of static friction between tyres and road is 0.3. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 75 mμs = 0.3g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.9 mv = 5 m/s

A 1.5 kg ball on a string 0.9 m long is swung in a vertical circle. At the lowest point it moves at 5 m/s. Use g = 9.81 m/s². Find the tension T in the string at the lowest point.

m = 1.5 kgr = 0.9 mv = 5 m/sg = 9.81 m/s²
T = N
9.Work & energyMedium
110 km/h

A car travelling at 110 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.6. Find the stopping distance d.

v = 110 km/hμ = 0.6g = 9.81 m/s²
d = m
10.Work & energyHard
h = 10.4 mR = 4 mN = ?

A 10 kg cart is released from rest at a height of 10.4 m on a smooth track that leads into a vertical circular loop of radius 4 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 10 kgh = 10.4 mR = 4 mg = 9.81 m/s²
N = N
11.Momentum & collisionsMedium
13 kg41 m/s5 kgv′2​ = ?

An 18 kg projectile moving horizontally at 23 m/s explodes into two fragments that move along the same line. The 13 kg fragment continues forwards at 41 m/s. Find the velocity v′2 of the 5 kg fragment (positive in the original direction).

M = 18 kgu = 23 m/sm1 = 13 kgv′1 = 41 m/sm2 = 5 kg
v′2 = m/s
12.Momentum & collisionsHard
1400 kgv1​ = ?1600 kg

A 1400 kg car runs into a parked 1600 kg car. The wrecks lock together and skid 6 m before stopping. The coefficient of kinetic friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1400 kgm2 = 1600 kgd = 6 mμ = 0.6g = 9.81 m/s²
v1 = m/s
13.Rigid-body rotationMedium
n = 2600 rpmTb​ = 155 N·mI = 21.5 kg·m²

A flywheel with a moment of inertia of 21.5 kg·m² spins at 2600 rpm. A brake applies a constant friction torque of 155 N·m. How many revolutions N does the flywheel make before it stops?

I = 21.5 kg·m²n = 2600 rpmTb = 155 N·m
N = rev
14.Rigid-body rotationHard
θ = 20°as = 6.5 m

A solid sphere rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². It starts from rest. How long t does it take to roll 6.5 m down the slope?

θ = 20°I = (2/5)·m·r²g = 9.81 m/s²s = 6.5 m
t = s
15.Gears & gear trainsMedium
d1​ = 150 mmd2​ = 500 mm1440 rpmn2​ = ?

A 150 mm pulley at 1440 rpm drives a 500 mm pulley by a belt with 2.5 % slip. Find the speed n2 of the driven pulley.

n1 = 1440 rpmd1 = 150 mmd2 = 500 mms = 2.5 %
n2 = rpm
16.Gears & gear trainsHard
Ns​ = 12ring fixedNp​ = 18nc​ = ?

In a planetary gear set the sun gear has 12 teeth and each planet gear has 18 teeth. The ring gear is held fixed and the sun is driven at 900 rpm. Find the speed nc of the planet carrier.

Ns = 12Np = 18ns = 900 rpm
nc = rpm
17.Springs & pendulumsMedium
L = 3 m

A simple pendulum has a length of 3 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 3 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
2.1 kgk = 390 N/mA = 9 cm

A 2.1 kg mass on a spring with k = 390 N/m is pulled 9 cm from equilibrium and released. Find the total energy E of the oscillation.

m = 2.1 kgk = 390 N/mA = 9 cm
E = J
19.Mechanical vibrationsMedium
k = 5 kN/mζ = 0.4m = 2 kg

A 2 kg mass on a spring with a stiffness of 5 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 2 kgk = 5 kN/mζ = 0.4
fd = Hz
20.Mechanical vibrationsHard
k1​ = 50k2​ = 15k3​ = 25m = 25 kg

A 25 kg mass hangs from spring k₃ = 25 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 50 kN/m and k₂ = 15 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 25 kgk1 = 50 kN/mk2 = 15 kN/mk3 = 25 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 28.13 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 54/3.6 = 15 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 15²/(2·4) = 28.13 m

Answer

s = 28.13 m
2.Kinematics

Answer: hmax = 337.2 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 28·2.5 = 70 m/s
h₁ = ½·28·2.5² = 87.5 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 70²/(2·9.81) = 249.7 m
hmax = 87.5 + 249.7 = 337.2 m

Answer

hmax = 337.2 m
3.Newton’s laws

Answer: a = 1.479 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0.3·cos 25°) = 9.81·(0.4226 − 0.2719) = 1.479 m/s²

Answer

a = 1.479 m/s²
4.Newton’s laws

Answer: T = 26.16 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (49.05 − 7.848)/9 = 4.578 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 4·4.578 + 7.848 = 26.16 N

Answer

T = 26.16 N
5.Projectile motion

Answer: v0 = 47.5 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·115/sin 150°) = 47.5 m/s

Answer

v0 = 47.5 m/s
6.Projectile motion

Answer: H = 42.57 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 33·sin 50° = 25.28 m/s

Rise above the cliff

Δh = vy²/(2g) = 25.28²/(2·9.81) = 32.57 m

Height above the ground

H = 10 + 32.57 = 42.57 m

Answer

H = 42.57 m
7.Circular motion

Answer: vmax = 14.86 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.3·9.81·75) = 14.86 m/s

Answer

vmax = 14.86 m/s (53.48 km/h)
8.Circular motion

Answer: T = 56.38 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Forces at the lowest point

Towards the centre (up) is positive.

T − m·g = m·v²/r
T = 1.5·9.81 + 1.5·5²/0.9 = 14.71 + 41.67 = 56.38 N

Answer

T = 56.38 N
9.Work & energy

Answer: d = 79.31 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 110/3.6 = 30.56 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 30.56²/(2·0.6·9.81) = 79.31 m

Answer

d = 79.31 m

Doubling the speed makes the stopping distance four times longer.

10.Work & energy

Answer: N = 19.62 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(10.4 − 8) = 47.09 m²/s²

Forces at the top

m·g = 10·9.81 = 98.1 N
N = mv²/R − mg = 10·47.09/4 − 98.1 = 19.62 N

Answer

N = 19.62 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

11.Momentum & collisions

Answer: v′2 = −23.8 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 18·23 = 414 kg·m/s

Momentum after

414 = 13·41 + 5·v′2
v′2 = (414 − 533)/5 = −23.8 m/s

Answer

v′2 = −23.8 m/s

The minus sign means the second fragment flies backwards.

12.Momentum & collisions

Answer: v1 = 18.01 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.6·9.81·6) = 8.404 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 3000·8.404/1400 = 18.01 m/s

Answer

v1 = 18.01 m/s
(64.83 km/h)
13.Rigid-body rotation

Answer: N = 818.3 rev

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Angular velocity

ω = 2π·2600/60 = 272.3 rad/s

Work of the brake equals the kinetic energy

½·I·ω² = ½·21.5·272.3² = 796916 J
θ = 796916/155 = 5141 rad

Revolutions

N = θ/2π = 818.3 rev

Answer

N = 818.3 rev
14.Rigid-body rotation

Answer: t = 2.329 s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Equations of motion

m·g·sin θ − f = m·a
f·r = I·α = 0.4·m·r²·(a/r) → f = 0.4·m·a

Acceleration

a = g·sin θ/(1 + c) = 9.81·sin 20°/1.4 = 2.397 m/s²

Time

s = ½·a·t² → t = √(2·6.5/2.397) = 2.329 s

Answer

t = 2.329 s
15.Gears & gear trains

Answer: n2 = 421.2 rpm

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Speed without slip

1440·150/500 = 432 rpm

With slip

n2 = 432·0.975 = 421.2 rpm

Answer

n2 = 421.2 rpm
16.Gears & gear trains

Answer: nc = 180 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 12 + 2·18 = 48

Willis equation with the ring fixed

Set nr = 0 and solve for the carrier speed.

(900 − nc)/(0 − nc) = −48/12
nc = ns·Ns/(Ns + Nr) = 900·12/60 = 180 rpm

Answer

nc = 180 rpm

The carrier turns in the same direction as the sun.

17.Springs & pendulums

Answer: T = 3.475 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(3/9.81) = 3.475 s

Answer

T = 3.475 s
18.Springs & pendulums

Answer: E = 1.579 J

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(390/2.1) = 13.63 rad/s

Energy

E = ½·k·A² = ½·390·0.09² = 1.579 J

Answer

E = 1.579 J
19.Mechanical vibrations

Answer: fd = 7.293 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(5000/2) = 50 rad/s
fn = 50/(2π) = 7.958 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 7.958·√(1 − 0.4²) = 7.293 Hz

Answer

fd = 7.293 Hz
20.Mechanical vibrations

Answer: fn = 4.277 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 50 + 15 = 65 kN/m
keq = 65·25/(65 + 25) = 18.06 kN/m

Natural frequency

ωn = √(18056/25) = 26.87 rad/s
fn = 26.87/(2π) = 4.277 Hz

Answer

fn = 4.277 Hz

ExamProblems · examproblems.com/courses/dynamics