Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)8.333 s33.33

A car driving at 120 km/h brakes with a constant deceleration of 4 m/s² until it stops. Find the braking distance s.

v₀ = 120 km/ha = −4 m/s²v = 0
s = m
2.KinematicsHard
d = ?

A stone is dropped from rest into a well. The splash is heard 4 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.

ttotal = 4 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
θ = 25°a = ?m = 12 kg

A 12 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 12 kgθ = 25°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 35°blockv₀ = 9 m/s

A block is given a push so that it starts sliding up a ramp at 35° with a speed of 9 m/s. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 9 m/sθ = 35°μ = 0.3g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = 40 m/s25°x = ?

A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 40 m/sθ = 25°g = 9.81 m/s²
x = m
6.Projectile motionHard
18 mv0​ = 32 m/s45°x = ?

A ball is thrown from ground level at 32 m/s and 45° above the horizontal. It lands on the flat roof of a building 18 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 32 m/sθ = 45°hroof = 18 mg = 9.81 m/s²
x = m
7.Circular motionMedium
r = 105 mvmax​ = ?

A car takes a flat curve of radius 105 m. The coefficient of static friction between tyres and road is 0.8. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 105 mμs = 0.8g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
r = 0.5 mv = ?

A ball on a string 0.5 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?

r = 0.5 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
30°d = 9 mμ = 0.4

A 1 kg block slides 9 m down a slope at 30° to the horizontal, with a coefficient of kinetic friction of 0.4. Find the work Wf done against friction.

m = 1 kgθ = 30°μ = 0.4d = 9 mg = 9.81 m/s²
Wf = J
10.Work & energyHard
h = 5 mL = 1.5 mμ = 0.25k = 5000 N/m

A 4 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.25) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 4 kgh = 5 mL = 1.5 mμ = 0.25k = 5000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
2000 kg5 m/s1100 kg

A 2000 kg car moving at 5 m/s runs into a stationary 1100 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 2000 kgv1 = 5 m/sm2 = 1100 kgv2 = 0
ΔK/K = %
12.Momentum & collisionsHard
22 m/s10 m/s

A 0.15 kg ball hits a wall at 22 m/s and bounces straight back at 10 m/s. The contact lasts 50 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.15 kgvin = 22 m/svout = 10 m/sΔt = 50 ms
J = N·s
13.Rigid-body rotationMedium
L = 2.7 mm = 3 kgα

A uniform slender rod of mass 3 kg and length 2.7 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 3 kgL = 2.7 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
disc: 5 kgring: 12 kgn1​ = 400 rpm

A uniform solid disc (mass 5 kg, radius 0.3 m) spins freely at 400 rpm about a vertical frictionless shaft. A thin ring of mass 12 kg and the same radius is dropped onto it from rest, centred on the shaft, and the two quickly spin together. Find their common speed n2 in rpm.

Mdisc = 5 kgMring = 12 kgR = 0.3 mn1 = 400 rpm
n2 = rpm
15.Gears & gear trainsMedium
N1​N2​ = ?

Two parallel shafts are 30 mm apart. They must be connected by a pair of spur gears with a module of 1.5 mm and a speed reduction of 1.5 : 1. How many teeth N2 must the gear have?

a = 30 mmm = 1.5 mmi = 1.5
N2 =
16.Gears & gear trainsHard
A = 12B = 20C = 20D = ?

In a compound gear train, gear A (12 teeth) on the input shaft turns at 1500 rpm and drives gear B (20 teeth). Gear C (20 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 300 rpm. How many teeth ND must gear D have?

nin = 1500 rpmA = 12B = 20C = 20nout = 300 rpm
ND =
17.Springs & pendulumsMedium
L = ?

How long must a simple pendulum be to have a period of 2.9 s? Use g = 9.81 m/s². Find L.

T = 2.9 sg = 9.81 m/s²
L = m
18.Springs & pendulumsHard
0.6 kgk = 30 N/mA = 4 cm

A 0.6 kg mass on a spring with k = 30 N/m is pulled 4 cm from equilibrium and released. Find its maximum speed vmax.

m = 0.6 kgk = 30 N/mA = 4 cm
vmax = m/s
19.Mechanical vibrationsMedium
k = 150 kN/mc = 550 N·s/mm = 80 kg

An 80 kg mass is supported by a spring with a stiffness of 150 kN/m and a viscous damper with a damping coefficient of 550 N·s/m. Find the damping ratio ζ.

m = 80 kgk = 150 kN/mc = 550 N·s/m
ζ =
20.Mechanical vibrationsHard
k1​ = 15k2​ = 30k3​ = 5m = 10 kg

A 10 kg mass hangs from spring k₃ = 5 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 15 kN/m and k₂ = 30 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 15 kN/mk2 = 30 kN/mk3 = 5 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 138.9 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 120/3.6 = 33.33 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 33.33²/(2·4) = 138.9 m

Answer

s = 138.9 m
2.Kinematics

Answer: d = 70.61 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Two parts of the time

½·9.81·t₁² = 343·(4 − t₁)
4.905·t₁² + 343·t₁ − 1372 = 0

Fall time

Only the positive root is physical.

t₁ = (−343 + √(343² + 4·4.905·1372))/(2·4.905) = 3.794 s

Depth

d = ½·9.81·3.794² = 70.61 m

Answer

d = 70.61 m
3.Newton’s laws

Answer: a = 2.368 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0.2·cos 25°) = 9.81·(0.4226 − 0.1813) = 2.368 m/s²

Answer

a = 2.368 m/s²
4.Newton’s laws

Answer: d = 5.039 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 35° + 0.3·cos 35°) = 8.038 m/s²

Distance

d = v₀²/(2a) = 9²/(2·8.038) = 5.039 m

Answer

d = 5.039 m
5.Projectile motion

Answer: x = 124.9 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 40·cos 25° = 36.25 m/s
vy = v0·sin θ = 40·sin 25° = 16.9 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·16.9/9.81 = 3.446 s

Horizontal distance

x = vx·t = 36.25·3.446 = 124.9 m

Answer

x = 124.9 m
6.Projectile motion

Answer: x = 81.26 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 22.63 m/s, vy = 22.63 m/s

Time to land on the roof

Larger root: the ball is descending.

18 = 22.63·t − 4.905·t²
t = (22.63 + √(22.63² − 2·9.81·18))/9.81 = 3.591 s

Horizontal distance

x = vx·t = 22.63·3.591 = 81.26 m

Answer

x = 81.26 m
7.Circular motion

Answer: vmax = 28.71 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.8·9.81·105) = 28.71 m/s

Answer

vmax = 28.71 m/s (103.3 km/h)
8.Circular motion

Answer: vmin = 2.215 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Tension zero at the top

m·g = m·v²/r → v = √(g·r) = √(9.81·0.5) = 2.215 m/s

Answer

vmin = 2.215 m/s
9.Work & energy

Answer: Wf = 30.58 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 9.81·0.866 = 8.496 N
F = μN = 0.4·8.496 = 3.398 N

Work against friction

Wf = F·d = 3.398·9 = 30.58 J

Answer

Wf = 30.58 J
10.Work & energy

Answer: x = 26.94 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 39.24·(5 − 0.25·1.5) = 181.5 J

Maximum compression

½kx² = 181.5 → x = √(2·181.5/5000) = 0.2694 m = 26.94 cm

Answer

x = 26.94 cm
11.Momentum & collisions

Answer: ΔK/K = 35.48 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 2000·5/3100 = 3.226 m/s

Kinetic energy before and after

Kbefore = ½·2000·5² = 25000 J
Kafter = ½·3100·3.226² = 16129 J

Fraction lost

ΔK/K = 8871/25000 = 35.48 %

Answer

ΔK/K = 35.48 %

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: J = 4.8 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.15·(10 + 22) = 4.8 N·s

Answer

J = 4.8 N·s
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.7) = 5.45 rad/s²

Acceleration of the free end

atip = α·L = 5.45·2.7 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: n2 = 68.97 rpm

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moments of inertia

I1 = ½·5·0.3² = 0.225 kg·m²
I2 = 12·0.3² = 1.08 kg·m²

Conservation of angular momentum

n2 = n1·I1/(I1 + I2) = 400·0.225/1.305 = 68.97 rpm

Answer

n2 = 68.97 rpm
15.Gears & gear trains

Answer: N2 = 24

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Total number of teeth

N1 + N2 = 2a/m = 2·30/1.5 = 40

Split by the ratio

N1 = 40/(1 + 1.5) = 16
N2 = 1.5·16 = 24

Answer

N2 = 24
16.Gears & gear trains

Answer: ND = 60

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 1500·12/20 = 900 rpm

Teeth on gear D

ND = C·nC/nout = 20·900/300 = 60

Answer

ND = 60
17.Springs & pendulums

Answer: L = 2.09 m

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Solve for the length

L = g·(T/2π)² = 9.81·(2.9/2π)² = 2.09 m

Answer

L = 2.09 m
18.Springs & pendulums

Answer: vmax = 0.2828 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(30/0.6) = 7.071 rad/s

Maximum speed

vmax = A·ω = 0.04·7.071 = 0.2828 m/s

Answer

vmax = 0.2828 m/s
19.Mechanical vibrations

Answer: ζ = 0.07939

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(150000·80) = 6928 N·s/m

Damping ratio

ζ = c/cc = 550/6928 = 0.07939

Answer

ζ = 0.07939

ζ < 1, so the system is underdamped and oscillates as it decays.

20.Mechanical vibrations

Answer: fn = 3.376 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 15 + 30 = 45 kN/m
keq = 45·5/(45 + 5) = 4.5 kN/m

Natural frequency

ωn = √(4500/10) = 21.21 rad/s
fn = 21.21/(2π) = 3.376 Hz

Answer

fn = 3.376 Hz

ExamProblems · examproblems.com/courses/dynamics