In the print window, choose “Save as PDF” to keep a copy on your device.
1Formulas and methods
Kinematics
Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h
Method
List what you know: v₀, v, a, t and s, with units.
Pick the equation that contains your three knowns and the unknown.
Choose one positive direction and give opposing quantities a minus sign.
Solve and check that the answer is physically sensible.
Newton’s laws
Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ
Method
Draw a free-body diagram with every force on the body.
Choose a positive direction along the motion.
Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
Apply ΣF = m·a along the motion; friction is μ·N against the motion.
Projectile motion
Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g
Method
Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
The horizontal motion has constant speed; the vertical motion has acceleration −g.
Find the time of flight from the vertical motion.
Use that time in the horizontal motion to find the range.
Circular motion
Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)
Work & energy
Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t
Momentum & collisions
Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv
Method
Choose a positive direction and give each velocity its sign.
Write the total momentum before: Σm·v.
For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
Set momentum before equal to momentum after and solve.
Rigid-body rotation
Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω
Method
Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.
Gears & gear trains
Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios
Springs & pendulums
Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²
Mechanical vibrations
Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2
2Practice problems
1.KinematicsMedium
A car driving at 120 km/h brakes with a constant deceleration of 7.5 m/s² until it stops. Find the braking distance s.
v₀ = 120 km/ha = −7.5 m/s²v = 0
s = m
2.KinematicsHard
A ball is thrown straight up at 15 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 15 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 2 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 2 kgθ = 20°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 4.5 kg block on a ramp at 35° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 5.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 4.5 kgm2 = 5.5 kgθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 65° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 14 m/sθ = 65°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 55° above horizontal from the top of a 55 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 16 m/sθ = 55°h = 55 mg = 9.81 m/s²
x = m
7.Circular motionMedium
A road engineer wants cars to take a curve of radius 200 m at 80 km/h without relying on friction. Use g = 9.81 m/s². Find the banking angle θ.
r = 200 mv = 80 km/hg = 9.81 m/s²
θ = °
8.Circular motionHard
A ball on a string 0.9 m long is swung in a vertical circle. Use g = 9.81 m/s². What is the smallest speed vmin at the top for which the string just stays tight?
r = 0.9 mg = 9.81 m/s²
vmin = m/s
9.Work & energyMedium
A 5 kg ball hangs on a light string of length 0.8 m. It is pulled aside until the string makes 60° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.
m = 5 kgL = 0.8 mθ = 60°g = 9.81 m/s²
T = N
10.Work & energyHard
A 5 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 5 m long (μ = 0.15) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 5 kgh = 4 mL = 5 mμ = 0.15k = 1000 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
A 4 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 4 kgm2 = 5 kgv1 = 4 m/sv2 = 0
v′2 = m/s
12.Momentum & collisionsHard
A 0.1 kg ball hits a wall at 9 m/s and bounces straight back at 20 m/s. The contact lasts 20 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.1 kgvin = 9 m/svout = 20 m/sΔt = 20 ms
J = N·s
13.Rigid-body rotationMedium
A uniform slender rod of mass 4.5 kg and length 2.8 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find its angular acceleration α just after release.
m = 4.5 kgL = 2.8 mg = 9.81 m/s²
α = rad/s²
14.Rigid-body rotationHard
A solid cylinder rolls without slipping down a slope inclined at 25° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of its centre.
θ = 25°I = ½·m·r²g = 9.81 m/s²
a = m/s²
15.Gears & gear trainsMedium
Two parallel shafts are 72 mm apart. They must be connected by a pair of spur gears with a module of 1.5 mm and a speed reduction of 5 : 1. How many teeth N1 must the pinion have?
a = 72 mmm = 1.5 mmi = 5
N1 =
16.Gears & gear trainsHard
A 5.5 kW motor at 1450 rpm drives gear A (16 teeth), which meshes with gear B (48 teeth). Gear C (20 teeth) on the same shaft as B drives gear D (25 teeth) on the output shaft. Each gear mesh has an efficiency of 95%. Find the output torque Tout.
A 2.7 kg mass on a spring with k = 350 N/m is pulled 9 cm in the positive direction and released from rest at t = 0. Find its displacement x from equilibrium at t = 1.35 s (with sign).
m = 2.7 kgk = 350 N/mA = 9 cmt = 1.35 s
x = cm
18.Springs & pendulumsHard
A body oscillates in simple harmonic motion with period 1.1 s and amplitude 6 cm. What is the shortest time t it needs to move from its maximum displacement of 6 cm to a displacement of 3 cm?
T = 1.1 sA = 6 cmx = 3 cm
t = s
19.Mechanical vibrationsMedium
A 150 kg mass on a spring with a stiffness of 15 kN/m has a viscous damper giving a damping ratio of 0.6. Find the damped natural frequency fd of its free vibration in Hz.
m = 150 kgk = 15 kN/mζ = 0.6
fd = Hz
20.Mechanical vibrationsHard
A 5 kg mass hangs from spring k₃ = 40 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 50 kN/m and k₂ = 25 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.
m = 5 kgk1 = 50 kN/mk2 = 25 kN/mk3 = 40 kN/m
fn = Hz
3Solutions
1.Kinematics
Answer: s = 74.07 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 120/3.6 = 33.33 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 33.33²/(2·7.5) = 74.07 m
Answer
s = 74.07 m
2.Kinematics
Answer: t = 4.437 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−30 = 15·t − ½·9.81·t²
4.905·t² − 15·t − 30 = 0
Solve the quadratic
Only the positive root is physical.
t = (15 + √(15² + 2·9.81·30))/9.81 = 4.437 s
Answer
t = 4.437 s
3.Newton’s laws
Answer: a = 0.5897 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 53.96 N
m₁·g·sin θ = 25.32 N
μ·m₁·g·cos θ = 3.616 N
Acceleration of the system
a = (53.96 − 25.32 − 3.616)/10 = 2.502 m/s²
Answer
a = 2.502 m/s²
5.Projectile motion
Answer: x = 15.31 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 14·cos 65° = 5.917 m/s
vy = v0·sin θ = 14·sin 65° = 12.69 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·12.69/9.81 = 2.587 s
Horizontal distance
x = vx·t = 5.917·2.587 = 15.31 m
Answer
x = 15.31 m
6.Projectile motion
Answer: x = 45.35 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 16·cos 55° = 9.177 m/s
vy = v0·sin θ = 16·sin 55° = 13.11 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 55 + 13.11·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (13.11 + √(171.8 + 1079))/9.81 = 4.941 s
Horizontal distance
x = vx·t = 9.177·4.941 = 45.35 m
Answer
x = 45.35 m
7.Circular motion
Answer: θ = 14.13 °
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Units
v = 80/3.6 = 22.22 m/s
Banking angle
tan θ = v²/(r·g) = 22.22²/(200·9.81) = 0.2517
θ = 14.13°
Answer
θ = 14.13°
8.Circular motion
Answer: vmin = 2.971 m/s
Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.
Tension zero at the top
m·g = m·v²/r → v = √(g·r) = √(9.81·0.9) = 2.971 m/s
Answer
vmin = 2.971 m/s
9.Work & energy
Answer: T = 98.1 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the bottom
v² = 2gL(1 − cos θ) = 2·9.81·0.8·(1 − cos 60°) = 7.848 m²/s²
Forces at the bottom
m·g = 5·9.81 = 49.05 N
T = mg + mv²/L = 49.05 + 5·7.848/0.8 = 98.1 N
Answer
T = 98.1 N
Check: T = mg(3 − 2cos θ) = 98.1 N.
10.Work & energy
Answer: x = 56.46 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 49.05·(4 − 0.15·5) = 159.4 J
Maximum compression
½kx² = 159.4 → x = √(2·159.4/1000) = 0.5646 m = 56.46 cm
Answer
x = 56.46 cm
11.Momentum & collisions
Answer: v′2 = 3.556 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (4 − 5)/(4 + 5)·4 = −0.4444 m/s
v′2 = 2·4/(4 + 5)·4 = 3.556 m/s
Answer
v′2 = 3.556 m/s
12.Momentum & collisions
Answer: J = 2.9 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.1·(20 + 9) = 2.9 N·s
Answer
J = 2.9 N·s
13.Rigid-body rotation
Answer: α = 5.255 rad/s²
Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.
Moments about the pin
At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.
Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.
Equations of motion
m·g·sin θ − f = m·a
f·r = I·α = 0.5·m·r²·(a/r) → f = 0.5·m·a
Acceleration
a = g·sin θ/(1 + c) = 9.81·sin 25°/1.5 = 2.764 m/s²
Answer
a = 2.764 m/s²
15.Gears & gear trains
Answer: N1 = 16
Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.
Total number of teeth
N1 + N2 = 2a/m = 2·72/1.5 = 96
Split by the ratio
N1 = 96/(1 + 5) = 16
Answer
N1 = 16
16.Gears & gear trains
Answer: Tout = 122.6 N·m
Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.
Output speed
nout = 1450·(16/48)·(20/25) = 386.7 rpm
ωout = 2π·386.7/60 = 40.49 rad/s
Output power and torque
Pout = 5500·0.95² = 4964 W
Tout = Pout/ωout = 4964/40.49 = 122.6 N·m
Answer
Tout = 122.6 N·m
17.Springs & pendulums
Answer: x = −8.492 cm
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = √(350/2.7) = 11.39 rad/s
ω·t = 11.39·1.35 = 15.37 rad
Displacement
x = A·cos(ω·t) = 9·cos(15.37) = −8.492 cm
Answer
x = −8.492 cm
18.Springs & pendulums
Answer: t = 0.1833 s
Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².
Angular frequency
ω = 2π/T = 2π/1.1 = 5.712 rad/s
Solve for the time
0.5 = cos(ω·t) → ω·t = arccos(0.5) = 1.047 rad
t = 1.047/5.712 = 0.1833 s
Answer
t = 0.1833 s
19.Mechanical vibrations
Answer: fd = 1.273 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Undamped natural frequency
ωn = √(15000/150) = 10 rad/s
fn = 10/(2π) = 1.592 Hz
Damped natural frequency
fd = fn·√(1 − ζ²) = 1.592·√(1 − 0.6²) = 1.273 Hz
Answer
fd = 1.273 Hz
20.Mechanical vibrations
Answer: fn = 11.5 Hz
Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.
Equivalent stiffness
Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.