Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)4.167 s33.33

A car driving at 120 km/h brakes with a constant deceleration of 8 m/s² until it stops. Find the braking distance s.

v₀ = 120 km/ha = −8 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 7 m/s25 m

A ball is thrown straight up at 7 m/s from the edge of a roof 25 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 7 m/sh₀ = 25 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
4.5 kg0.5 kg

Masses of 4.5 kg and 0.5 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the acceleration a of the masses.

m1 = 4.5 kgm2 = 0.5 kgg = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 30°blockv₀ = 10 m/s

A block is given a push so that it starts sliding up a ramp at 30° with a speed of 10 m/s. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 10 m/sθ = 30°μ = 0.2g = 9.81 m/s²
d = m
5.Projectile motionMedium
v0​ = ?15°R = 145 m

A ball is launched from level ground at 15° above the horizontal and lands 145 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 15°R = 145 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 35 mv0​ = 31 m/s35°range

A ball is launched at 35° above horizontal from the top of a 35 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 31 m/sθ = 35°h = 35 mg = 9.81 m/s²
t = s
7.Circular motionMedium
θ = 10°to centrev = ?

A curve of radius 140 m is banked at 10°. At what speed v can a car take it with no friction needed at all? Use g = 9.81 m/s².

r = 140 mθ = 10°g = 9.81 m/s²
v = m/s
8.Circular motionHard
r = 1.5 m10 m/svtop​ = ?

A 1.6 kg ball on a light string 1.5 m long is swung in a vertical circle. At the lowest point its speed is 10 m/s. Ignore air resistance and use g = 9.81 m/s². Find the tension Ttop in the string at the highest point.

m = 1.6 kgr = 1.5 mvbottom = 10 m/sg = 9.81 m/s²
Ttop = N
9.Work & energyMedium
30°L = 1 m10 kg

A 10 kg ball hangs on a light string of length 1 m. It is pulled aside until the string makes 30° with the vertical and released from rest. Find the tension T in the string when the ball passes the lowest point.

m = 10 kgL = 1 mθ = 30°g = 9.81 m/s²
T = N
10.Work & energyHard
h = 2 mL = 4 mμ = 0.15k = 800 N/m

A 2.5 kg block is released from rest at height 2 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.15) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2.5 kgh = 2 mL = 4 mμ = 0.15k = 800 N/mg = 9.81 m/s²
x = cm
11.Momentum & collisionsMedium
1 kg6 m/s4 kg

A 1 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 4 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 1 kgm2 = 4 kgv1 = 6 m/sv2 = 0
v′1 = m/s
12.Momentum & collisionsHard
19 m/s10 m/s

A 0.55 kg ball hits a wall at 19 m/s and bounces straight back at 10 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.

m = 0.55 kgvin = 19 m/svout = 10 m/sΔt = 40 ms
Favg = N
13.Rigid-body rotationMedium
L = 2.8 mm = 18.5 kgα

A uniform slender rod of mass 18.5 kg and length 2.8 m is pinned at one end and held horizontal. It is released from rest. Use g = 9.81 m/s². Find the acceleration atip of the free end just after release.

m = 18.5 kgL = 2.8 mg = 9.81 m/s²
atip = m/s²
14.Rigid-body rotationHard
θ = 20°vs = 1 m

A hollow sphere starts from rest and rolls without slipping down a slope inclined at 20° to the horizontal. Use g = 9.81 m/s². Its radius is 0.15 m. Find its angular velocity ω after it has rolled 1 m along the slope.

θ = 20°s = 1 mI = (2/3)·m·r²g = 9.81 m/s²r = 0.15 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 20, m = 3 mm

A 22 kW motor running at 1450 rpm drives a pinion with 20 teeth and a module of 3 mm. Find the tangential force Ft on the pinion teeth.

P = 22 kWn = 1450 rpmN1 = 20m = 3 mm
Ft = N
16.Gears & gear trainsHard
d1​ = 160 mmd2​ = 315 mm1440 rpmC = 1000 mmθ = ?

An open belt connects a 160 mm pulley and a 315 mm pulley whose centres are 1000 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 160 mmd2 = 315 mmC = 1000 mm
θ = °
17.Springs & pendulumsMedium
2.7 kgk = 210 N/mA = 10 cmx = 3 cm

A 2.7 kg mass on a spring with k = 210 N/m oscillates on a frictionless surface with an amplitude of 10 cm. Find its speed v when it is 3 cm from equilibrium.

m = 2.7 kgk = 210 N/mA = 10 cmx = 3 cm
v = m/s
18.Springs & pendulumsHard
3.8 kgk = 450 N/mA = 5 cm

A 3.8 kg mass on a spring with k = 450 N/m is pulled 5 cm from equilibrium and released. Find its maximum acceleration amax.

m = 3.8 kgk = 450 N/mA = 5 cm
amax = m/s²
19.Mechanical vibrationsMedium
tx12 mm1 cycle5.6 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 12 mm is followed one cycle later by a peak of 5.6 mm. Find the damping ratio ζ.

x0 = 12 mmx1 = 5.6 mmn = 1
ζ =
20.Mechanical vibrationsHard
k1​ = 20k2​ = 50m = 10 kg

A 10 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 20 kN/m and k₂ = 50 kN/m. The mass stays level. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 10 kgk1 = 20 kN/mk2 = 50 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: s = 69.44 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 120/3.6 = 33.33 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 33.33²/(2·8) = 69.44 m

Answer

s = 69.44 m
2.Kinematics

Answer: hmax = 27.5 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 7²/(2·9.81) = 2.497 m

Height above the ground

hmax = 25 + 2.497 = 27.5 m

Answer

hmax = 27.5 m
3.Newton’s laws

Answer: a = 7.848 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration

The net driving force is the difference of the weights; it moves the total mass.

a = (4.5 − 0.5)·9.81/(4.5 + 0.5) = 7.848 m/s²

Answer

a = 7.848 m/s²
4.Newton’s laws

Answer: d = 7.571 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 30° + 0.2·cos 30°) = 6.604 m/s²

Distance

d = v₀²/(2a) = 10²/(2·6.604) = 7.571 m

Answer

d = 7.571 m
5.Projectile motion

Answer: v0 = 53.34 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·145/sin 30°) = 53.34 m/s

Answer

v0 = 53.34 m/s
6.Projectile motion

Answer: t = 5.041 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 31·cos 35° = 25.39 m/s
vy = v0·sin θ = 31·sin 35° = 17.78 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 35 + 17.78·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (17.78 + √(316.2 + 686.7))/9.81 = 5.041 s

Answer

t = 5.041 s
7.Circular motion

Answer: v = 15.56 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Force balance

N·cos θ = m·g, N·sin θ = m·v²/r → tan θ = v²/(r·g)

Speed

v = √(r·g·tan θ) = √(140·9.81·tan 10°) = 15.56 m/s

Answer

v = 15.56 m/s
(56.02 km/h)
8.Circular motion

Answer: Ttop = 28.19 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed at the top

Kinetic energy is traded for potential energy over a height 2r.

vtop² = 10² − 4·9.81·1.5 = 41.14 m²/s²

Forces at the top

Tension and gravity both point down, towards the centre.

T + m·g = m·vtop²/r
T = 1.6·41.14/1.5 − 1.6·9.81 = 28.19 N

Answer

Ttop = 28.19 N
9.Work & energy

Answer: T = 124.4 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the bottom

v² = 2gL(1 − cos θ) = 2·9.81·1·(1 − cos 30°) = 2.629 m²/s²

Forces at the bottom

m·g = 10·9.81 = 98.1 N
T = mg + mv²/L = 98.1 + 10·2.629/1 = 124.4 N

Answer

T = 124.4 N

Check: T = mg(3 − 2cos θ) = 124.4 N.

10.Work & energy

Answer: x = 29.3 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 24.53·(2 − 0.15·4) = 34.34 J

Maximum compression

½kx² = 34.34 → x = √(2·34.34/800) = 0.293 m = 29.3 cm

Answer

x = 29.3 cm
11.Momentum & collisions

Answer: v′1 = −3.6 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1 − 4)/(1 + 4)·6 = −3.6 m/s
v′2 = 2·1/(1 + 4)·6 = 2.4 m/s

Answer

v′1 = −3.6 m/s

The minus sign means the first glider bounces back.

12.Momentum & collisions

Answer: Favg = 398.8 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.55·(10 + 19) = 15.95 N·s

Average force

Favg = J/Δt = 15.95/0.04 = 398.8 N

Answer

Favg = 398.8 N
13.Rigid-body rotation

Answer: atip = 14.71 m/s²

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Moments about the pin

At the moment of release ω = 0, so there is no centripetal acceleration and the centre accelerates straight down.

m·g·L/2 = (m·L²/3)·α → α = 3g/(2L) = 3·9.81/(2·2.8) = 5.255 rad/s²

Acceleration of the free end

atip = α·L = 5.255·2.8 = 14.71 m/s²

Answer

atip = 14.71 m/s²

atip = 1.5·g for any length: the free end falls faster than a dropped stone.

14.Rigid-body rotation

Answer: ω = 13.38 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Height dropped

h = s·sin θ = 1·sin 20° = 0.342 m

Energy balance with rolling

Rolling without slipping: ω = v/r, and friction does no work at the contact point.

m·g·h = ½·m·v²·(1 + 0.6667)
v = √(2·9.81·0.342/1.667) = 2.007 m/s
ω = v/r = 2.007/0.15 = 13.38 rad/s

Answer

ω = 13.38 rad/s
15.Gears & gear trains

Answer: Ft = 4830 N

Gear geometry: the module m sets the tooth size. A gear with N teeth has a pitch diameter d = m·N, two meshing gears have the same module, and their centre distance is a = (d₁ + d₂)/2 = m·(N₁ + N₂)/2. The pitch-line speed is v = π·d·n/60, and the tangential tooth force follows from the torque: Ft = 2T/d.

Torque on the pinion

ω = 2π·1450/60 = 151.8 rad/s
T = P/ω = 22000/151.8 = 144.9 N·m

Pitch diameter

d = m·N = 3·20 = 60 mm

Tangential force

Ft = 2T/d = 2·144.9/0.06 = 4830 N

Answer

Ft = 4830 N
16.Gears & gear trains

Answer: θ = 171.1 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.0775) = 4.445°

Angle of wrap

θ = 180 − 2·4.445 = 171.1°

Answer

θ = 171.1°
17.Springs & pendulums

Answer: v = 0.8413 m/s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(210/2.7) = 8.819 rad/s

Speed at x

v = ω·√(A² − x²) = 8.819·√(0.1² − 0.03²) = 0.8413 m/s

Answer

v = 0.8413 m/s
18.Springs & pendulums

Answer: amax = 5.921 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(450/3.8) = 10.88 rad/s

Maximum acceleration

amax = A·ω² = 0.05·10.88² = 5.921 m/s²

Answer

amax = 5.921 m/s²
19.Mechanical vibrations

Answer: ζ = 0.1204

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(12/5.6) = 0.7621

Damping ratio

ζ = δ/√(4π² + δ²) = 0.7621/√(39.48 + 0.5809) = 0.1204

Answer

ζ = 0.1204
20.Mechanical vibrations

Answer: fn = 13.32 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 20 + 50 = 70 kN/m

Natural frequency

ωn = √(70000/10) = 83.67 rad/s
fn = 83.67/(2π) = 13.32 Hz

Answer

fn = 13.32 Hz

ExamProblems · examproblems.com/courses/dynamics