Dynamics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Circular motion

Centripetal acceleration
a = v²/r = ω²·r
Centripetal force
F = m·v²/r
Angular speed
ω = v/r = 2π/T
Flat curve, friction
vmax = √(μ·g·r)

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Rigid-body rotation

Moments of inertia about G
rod mL²/12, disc ½mR², ring mR², solid sphere (2/5)mR², hollow sphere (2/3)mR²
Parallel-axis theorem
I = IG + m·d²
Radius of gyration
I = m·k²
Rod about its end
I = mL²/3
Equation of motion
ΣM = I·α
Speed in rad/s
ω = 2π·n/60
Kinetic energy
E = ½·I·ω²
Work and power
W = T·θ, P = T·ω
Rolling without slipping
v = ω·r, E = ½mv²(1 + I/(mr²)), a = g·sin θ/(1 + I/(mr²))
Angular momentum
L = I·ω, I1ω1 = I2ω2
Impact about a pivot
m·v·d = I·ω

Method

  1. Choose the axis: a fixed pivot, or the centre of mass for rolling bodies.
  2. Find the moment of inertia about that axis from the standard results, using I = IG + m·d² for a shifted axis.
  3. Pick the method: ΣM = I·α for accelerations and forces, energy (½·I·ω² + ½·m·v² + m·g·h) for speeds, angular momentum for impacts and sudden changes.
  4. Link linear and angular motion with v = ω·r and a = α·r, and convert rpm to rad/s.

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Springs & pendulums

Mass on a spring
T = 2π·√(m/k)
Pendulum
T = 2π·√(L/g)
Angular frequency
ω = √(k/m) = 2π/T
Maximum speed and acceleration
vmax = A·ω, amax = A·ω²
Energy
E = ½·k·A²

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?27.78

A car driving at 100 km/h brakes with a constant deceleration of 5 m/s² until it stops. How long does braking take? Find t.

v₀ = 100 km/ha = −5 m/s²v = 0
t = s
2.KinematicsHard
v₀ = 6 m/s10 m

A ball is thrown straight up at 6 m/s from the edge of a roof 10 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 6 m/sh₀ = 10 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 20°a = ?m = 9 kg

A 9 kg block slides down a frictionless slope at 20° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 9 kgθ = 20°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 9.5 kg5.5 kgμ = 0.25

A 9.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5.5 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 9.5 kgm2 = 5.5 kgμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
64 my = ?v0​ = 32 m/s25°

A ball is kicked from level ground at 32 m/s and 25° above the horizontal towards a wall 64 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 32 m/sθ = 25°x = 64 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 20 mv0​ = 29 m/s15°v = ?

A ball is launched at 29 m/s and 15° above the horizontal from the top of a 20 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the speed v with which it hits the ground.

v₀ = 29 m/sθ = 15°h = 20 mg = 9.81 m/s²
v = m/s
7.Circular motionMedium
r = 140 mvmax​ = ?

A car takes a flat curve of radius 140 m. The coefficient of static friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the highest speed vmax at which the car can take the curve without skidding.

r = 140 mμs = 0.5g = 9.81 m/s²
vmax = m/s
8.Circular motionHard
R = 2 mh = 5.8 m

A 4.5 kg cart is released from rest at a height of 5.8 m on a frictionless track and runs through a vertical loop of radius 2 m. Use g = 9.81 m/s². Find the normal force Nbottom of the track on the cart at the bottom of the loop.

m = 4.5 kgh = 5.8 mR = 2 mg = 9.81 m/s²
Nbottom = N
9.Work & energyMedium
0.15 kgk = 400 N/mh = ?

A toy launcher has a vertical spring of stiffness 400 N/m. A 0.15 kg ball is placed on it and the spring is compressed by 10 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.15 kgk = 400 N/mx = 10 cmg = 9.81 m/s²
h = m
10.Work & energyHard
8 kg6 kgμ = 0.25d = 3 m

An 8 kg block rests on a rough horizontal table (μ = 0.25). A light string runs from it over a smooth pulley at the edge of the table to a hanging 6 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 3 m.

m1 = 8 kgm2 = 6 kgμ = 0.25d = 3 mg = 9.81 m/s²
v = m/s
11.Momentum & collisionsMedium
1400 kg22 m/s2000 kg

A 1400 kg car moving at 22 m/s runs into a stationary 2000 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 1400 kgv1 = 22 m/sm2 = 2000 kgv2 = 0
ΔK = J
12.Momentum & collisionsHard
4 kgv = ?20 g40°L = 1 m

A 20 g bullet is fired horizontally into a 4 kg block hanging from light strings 1 m long, and stays in it. The strings swing out to a largest angle of 40° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 20 gM = 4 kgL = 1 mθ = 40°g = 9.81 m/s²
v = m/s
13.Rigid-body rotationMedium
v = ?1 kgL = 1 mm = 2 kg

A uniform slender rod of mass 2 kg and length 1 m is pinned at one end and released from rest in a horizontal position. A small ball of mass 1 kg is fixed to its free end. Ignore friction and use g = 9.81 m/s². Find the speed v of the free end as the rod swings through the vertical position.

m = 2 kgL = 1 mmball = 1 kgg = 9.81 m/s²
v = m/s
14.Rigid-body rotationHard
220 m/s25 g0.81 mL = 1.9 m5.5 kg

A uniform slender rod of mass 5.5 kg and length 1.9 m hangs at rest from a frictionless pivot at its top end. A 25 g bullet moving horizontally at 220 m/s hits the rod 0.81 m below the pivot and stays embedded. Find the angular velocity ω of the rod just after the impact.

M = 5.5 kgL = 1.9 mm = 25 gv = 220 m/sd = 0.81 m
ω = rad/s
15.Gears & gear trainsMedium
N1​ = 18N2​ = 40

A 2.2 kW motor running at 2900 rpm drives a pinion with 18 teeth, which meshes with a gear with 40 teeth. The gear pair has an efficiency of 98%. Find the torque T1 on the motor shaft.

P = 2.2 kWn1 = 2900 rpmN1 = 18N2 = 40η = 98%
T1 = N·m
16.Gears & gear trainsHard
d1​ = 125 mmd2​ = 500 mm1450 rpmC = 1200 mmθ = ?

An open belt connects a 125 mm pulley and a 500 mm pulley whose centres are 1200 mm apart. Find the angle of wrap θ on the smaller pulley, in degrees.

d1 = 125 mmd2 = 500 mmC = 1200 mm
θ = °
17.Springs & pendulumsMedium
L = 2.6 m

A simple pendulum has a length of 2.6 m. Use g = 9.81 m/s². Find its period T for small swings.

L = 2.6 mg = 9.81 m/s²
T = s
18.Springs & pendulumsHard
1.4 kgk = 210 N/mA = 7 cm

A 1.4 kg mass on a spring with k = 210 N/m is pulled 7 cm from equilibrium and released. Find its maximum acceleration amax.

m = 1.4 kgk = 210 N/mA = 7 cm
amax = m/s²
19.Mechanical vibrationsMedium
k = 40 kN/mζ = 0.7m = 25 kg

A 25 kg mass on a spring with a stiffness of 40 kN/m has a viscous damper giving a damping ratio of 0.7. Find the damped natural frequency fd of its free vibration in Hz.

m = 25 kgk = 40 kN/mζ = 0.7
fd = Hz
20.Mechanical vibrationsHard
k1​ = 25k2​ = 10k3​ = 80m = 5 kg

A 5 kg mass hangs from spring k₃ = 80 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 25 kN/m and k₂ = 10 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 25 kN/mk2 = 10 kN/mk3 = 80 kN/m
fn = Hz

3Solutions

1.Kinematics

Answer: t = 5.556 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 100/3.6 = 27.78 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 27.78/5 = 5.556 s

Answer

t = 5.556 s
2.Kinematics

Answer: t = 2.165 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−10 = 6·t − ½·9.81·t²
4.905·t² − 6·t − 10 = 0

Solve the quadratic

Only the positive root is physical.

t = (6 + √(6² + 2·9.81·10))/9.81 = 2.165 s

Answer

t = 2.165 s
3.Newton’s laws

Answer: a = 3.355 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0·cos 20°) = 9.81·(0.342 − 0) = 3.355 m/s²

Answer

a = 3.355 m/s²
4.Newton’s laws

Answer: T = 42.71 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (53.96 − 23.3)/15 = 2.044 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 9.5·2.044 + 23.3 = 42.71 N

Answer

T = 42.71 N
5.Projectile motion

Answer: y = 5.957 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 32·cos 25° = 29 m/s
t = x/vx = 64/29 = 2.207 s

Height at that time

y = 13.52·2.207 − ½·9.81·2.207² = 5.957 m

Answer

y = 5.957 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: v = 35.12 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 29·cos 15° = 28.01 m/s
vy0 = 29·sin 15° = 7.506 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(7.506² + 2·9.81·20) = 21.18 m/s

Impact speed

v = √(28.01² + 21.18²) = 35.12 m/s

Answer

v = 35.12 m/s

Check with energy: v² = v₀² + 2gh.

7.Circular motion

Answer: vmax = 26.2 m/s

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Friction provides the centripetal force

m·v²/r = μ·m·g
v = √(μ·g·r) = √(0.5·9.81·140) = 26.2 m/s

Answer

vmax = 26.2 m/s (94.34 km/h)
8.Circular motion

Answer: Nbottom = 300.2 N

Uniform circular motion: an object moving at speed v on a circle of radius r accelerates towards the centre with a = v²/r, so it needs a net inward force F = m·v²/r. That force is supplied by something real: friction, tension, gravity or a normal force.

Speed from energy conservation

v² = 2·9.81·5.8 = 113.8 m²/s²

Forces

Towards the centre is positive.

N = m·v²/R + m·g = 4.5·113.8/2 + 44.15 = 300.2 N

Answer

Nbottom = 300.2 N
9.Work & energy

Answer: h = 1.359 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 10 cm = 0.1 m
½kx² = ½·400·0.1² = 2 J

Height

m·g = 0.15·9.81 = 1.472 N
h = ½kx²/(mg) = 2/1.472 = 1.359 m

Answer

h = 1.359 m
10.Work & energy

Answer: v = 4.101 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 58.86·3 = 176.6 J
μ·m₁g·d = 0.25·78.48·3 = 58.86 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 117.7 → v = √(2·117.7/14) = 4.101 m/s

Answer

v = 4.101 m/s
11.Momentum & collisions

Answer: ΔK = 199294 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1400·22/3400 = 9.059 m/s

Kinetic energy before and after

Kbefore = ½·1400·22² = 338800 J
Kafter = ½·3400·9.059² = 139506 J

Energy lost

ΔK = 338800 − 139506 = 199294 J

Answer

ΔK = 199294 J

The lost energy goes into deformation, heat and sound.

12.Momentum & collisions

Answer: v = 430.6 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Rise of the block

h = L·(1 − cos θ) = 1·(1 − cos 40°) = 0.234 m

Speed after impact

V = √(2·9.81·0.234) = 2.142 m/s

Collision

v = (m + M)·V/m = 4.02·2.142/0.02 = 430.6 m/s

Answer

v = 430.6 m/s
13.Rigid-body rotation

Answer: v = 4.852 m/s

Rotation about a fixed axis: the sum of the moments about the axis equals I·α (ΣM = I·α), just as ΣF = m·a for translation. In energy form, a torque T turning through an angle θ (in radians) does work T·θ, which changes the kinetic energy ½·I·ω²; gravity adds or removes m·g·Δh of the centre of mass. Power is P = T·ω.

Loss of potential energy

m·g·L/2 + mball·g·L = 2·9.81·0.5 + 1·9.81·1 = 19.62 J

Moment of inertia about the pin

IO = m·L²/3 + mball·L² = 0.6667 + 1 = 1.667 kg·m²

Energy balance

½·IO·ω² = 19.62 → ω = √(2·19.62/1.667) = 4.852 rad/s
v = ω·L = 4.852·1 = 4.852 m/s

Answer

v = 4.852 m/s
14.Rigid-body rotation

Answer: ω = 0.6715 rad/s

Rolling and angular momentum: a body rolling without slipping has v = ω·r, so its kinetic energy is ½·m·v² + ½·I·ω² = ½·m·v²·(1 + I/(m·r²)). Down a slope that gives a = g·sin θ/(1 + I/(m·r²)). When no external moment acts about an axis, the angular momentum about that axis stays constant, I₁·ω₁ = I₂·ω₂, even if kinetic energy is lost.

Moment of inertia after the impact

I = M·L²/3 + m·d² = 5.5·1.9²/3 + 0.025·0.81² = 6.635 kg·m²

Angular momentum about the pivot

The pivot force passes through the pivot, so it has no moment there during the impact.

m·v·d = I·ω → ω = 0.025·220·0.81/6.635 = 0.6715 rad/s

Answer

ω = 0.6715 rad/s
15.Gears & gear trains

Answer: T1 = 7.244 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·2900/60 = 303.7 rad/s
T1 = P/ω₁ = 2200/303.7 = 7.244 N·m

Answer

T1 = 7.244 N·m
16.Gears & gear trains

Answer: θ = 162 °

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt angle

asin(0.1563) = 8.989°

Angle of wrap

θ = 180 − 2·8.989 = 162°

Answer

θ = 162°
17.Springs & pendulums

Answer: T = 3.235 s

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Pendulum period

T = 2π·√(2.6/9.81) = 3.235 s

Answer

T = 3.235 s
18.Springs & pendulums

Answer: amax = 10.5 m/s²

Simple harmonic motion: a mass m on a spring of stiffness k oscillates with angular frequency ω = √(k/m) and period T = 2π/ω = 2π·√(m/k). A simple pendulum of length L has T = 2π·√(L/g). With amplitude A, the largest speed is A·ω, the largest acceleration A·ω² and the energy ½·k·A².

Angular frequency

ω = √(210/1.4) = 12.25 rad/s

Maximum acceleration

amax = A·ω² = 0.07·12.25² = 10.5 m/s²

Answer

amax = 10.5 m/s²
19.Mechanical vibrations

Answer: fd = 4.546 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(40000/25) = 40 rad/s
fn = 40/(2π) = 6.366 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 6.366·√(1 − 0.7²) = 4.546 Hz

Answer

fd = 4.546 Hz
20.Mechanical vibrations

Answer: fn = 11.11 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 25 + 10 = 35 kN/m
keq = 35·80/(35 + 80) = 24.35 kN/m

Natural frequency

ωn = √(24348/5) = 69.78 rad/s
fn = 69.78/(2π) = 11.11 Hz

Answer

fn = 11.11 Hz

ExamProblems · examproblems.com/courses/dynamics