Engineering Mathematics 2: cram pack

Formula sheets, the key method steps for every topic and 16 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Convolution & LTI systems

Discrete convolution
y[n] = Σ x[k]·h[n − k]
Continuous convolution
y(t) = ∫ x(τ)·h(t − τ) dτ
Length and sum
Ly = Lx + Lh − 1, Σy = Σx·Σh
Start, end and area
t1 + t3 … t2 + t4, ∫y = ∫x·∫h
Step into e^(−at)u(t)
y(t) = (A/a)(1 − e−at)
First-order system
y′ + a·y = b·x → h(t) = b·e−atu(t)
First-order recursion
y[n] = a·y[n − 1] + b·x[n] → h[n] = b·aⁿ
Sinusoid through h(t)
|H(jω)|, ∠H(jω); H(jω) = b/(a + jω)
Fourier series amplitudes
square ±A: 4A/(kπ), odd k; triangle ±A: 8A/(π²k²), odd k; pulse train: A·D and (2A/(kπ))|sin kπD|

Method

  1. Sketch both signals and note where each one is nonzero.
  2. Flip h and slide it: for each output time, find the range where both signals overlap.
  3. Multiply and add (discrete) or multiply and integrate (continuous) over that overlap only.
  4. Check the result: the output starts at the sum of the start times, ends at the sum of the end times, and its area or sum is the product of the input areas or sums.

2Practice problems

1.Differential equationsMedium
tyy(0) = 3y(1) = ?

Solve y″ + 5y′ + 6y = 0 with y(0) = 3 and y′(0) = 4. Find y(1).

y″ + 5y′ + 6y = 0y(0) = 3y′(0) = 4
y(1) =
2.Differential equationsHard
tyK = 5y(0.5) = ?

A system obeys y″ + 3y′ + 11.25y = 56.25 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find y(0.5); angles in radians.

y″ + 3y′ + 11.25y = 56.25y(0) = 0y′(0) = 0
y(0.5) =
3.Matrices & determinantsMedium
A =01153−2−52−3

Find the determinant det A of the 3×3 matrix A shown.

A = [0 1 1; 5 3 −2; −5 2 −3]
det A =
4.Matrices & determinantsHard
A =0−1−21

Find the larger eigenvalue λ of the matrix A shown.

A = [0 −1; −2 1]
λ =
5.Vectors: dot & cross productMedium
xyzab

Find the dot product a·b of a = (5, −3, 3) and b = (6, 2, 0).

a = (5, −3, 3)b = (6, 2, 0)
a·b =
6.Vectors: dot & cross productHard
xyzab

Find the area A of the parallelogram spanned by a = (3, −6, 5) and b = (6, −6, −3).

a = (3, −6, 5)b = (6, −6, −3)
A =
7.IntegralsMedium
xyπ/3y = x·sin x

Evaluate I = ∫₀π/3 x·sin x dx (x in radians).

∫₀π/3 x·sin x dx
I =
8.IntegralsHard
xy0.5y = x²eˣ

Evaluate I = ∫₀0.5 x²·eˣ dx.

∫₀0.5 x²eˣ dx
I =
9.Multivariable calculusMedium
xy32P

The tangent plane to z = 4xy³ − 2x² − y³ + 2xy at the point where (x, y) = (3, 2) can be written as z = px + qy + c. Find c.

f(x, y) = 4xy³ − 2x² − y³ + 2xy(a, b) = (3, 2)
c =
10.Multivariable calculusHard
xy3

Use polar coordinates to evaluate I = ∬R y dA, where R is the upper half of the disc x² + y² ≤ 9 (y ≥ 0).

f = y0 ≤ r ≤ 30 ≤ θ ≤ π
I =
11.Sequences & seriesMedium
xx₀ = 0??R

Find the radius of convergence R of the power series Σk=1∞ (1/2)ᵏ·xᵏ/(k + 1).

Σ (1/2)ᵏ·xᵏ/(k + 1)x₀ = 0
R =
12.Sequences & seriesHard
xyfP₂0.4

Use the Maclaurin polynomial of degree 2 of f(x) = ln(1 − x) to approximate f(0.4). Give P₂(0.4).

f(x) = ln(1 − x)n = 2x = 0.4
P₂(0.4) =
13.Laplace transformsMedium
t (s)f(t)t = 0.1f(0.1) = ?

Find f(t) for F(s) = (5s + 25)/(s² + 6s + 9) and evaluate f(0.1).

F(s) = (5s + 25)/(s² + 6s + 9)t = 0.1 s
f(0.1) =
14.Laplace transformsHard
t (s)y(t)t = 0.5y(0.5) = ?

Solve y″ + 5y′ + 6y = 0 with y(0) = 4 and y′(0) = 1 using the Laplace transform, and find y(0.5).

y″ + 5y′ + 6y = 0y(0) = 4y′(0) = 1t = 0.5 s
y(0.5) =
15.Convolution & LTI systemsMedium
x(t)t10h(t)t0.21

A system has the impulse response h(t) = e−5tu(t). The input is a step x(t) = 10·u(t). Find the output y(0.2) at t = 0.2 s.

h(t) = e−5tu(t)x(t) = 10·u(t)t = 0.2 s
y(0.2) =
16.Convolution & LTI systemsHard
x(t)t (ms)1241

A square wave switches between 1 and 0 with period T = 2 ms (half a period at each level). Find the amplitude c7 of its Fourier component at 3500 Hz.

0 … 1T = 2 msf = 3500 Hz
c7 =

3Solutions

1.Differential equations

Answer: y(1) = 1.261

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Characteristic roots

(r + 2)(r + 3) = 0 → r = −2, −3

Constants from the initial values

A + B = 3, −2A − 3B = 4
A = 13, B = −10

Evaluate

y(1) = 13·e−2 + (−10)·e−3 = 1.261

Answer

y(1) = 1.261
2.Differential equations

Answer: y(0.5) = 3.655

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 5, r = −1.5 ± 3j

Constants from the initial values

y(0) = 5 + A = 0 → A = −5
y′(0) = −1.5A + 3B = 0 → B = −2.5

Evaluate

y(0.5) = 5·(1 − e−0.75(cos 1.5 + 0.5·sin 1.5)) = 3.655

Answer

y(0.5) = 3.655
3.Matrices & determinants

Answer: det A = 50

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −5, M₁₂ = −25, M₁₃ = 25

Cofactor expansion

det A = 0·(−5) − 1·(−25) + 1·25 = 50

Answer

det A = 50
4.Matrices & determinants

Answer: λ = 2

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (1)λ + (−2) = 0

Solve

λ = (1 ± √(9))/2 → λ = −1, 2
λ = 2

Answer

λ = 2
5.Vectors: dot & cross product

Answer: a·b = 24

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Multiply matching components and add

a·b = 5·6 + (−3)·2 + 3·0 = 30 + (−6) + 0 = 24

Answer

a·b = 24

Positive: the angle between the vectors is less than 90°.

6.Vectors: dot & cross product

Answer: A = 64.41

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product

(a × b)x = aybz − azby = (−6)·(−3) − 5·(−6) = 48
(a × b)y = azbx − axbz = 5·6 − 3·(−3) = 39
(a × b)z = axby − aybx = 3·(−6) − (−6)·6 = 18

Area

A = |a × b| = √(48² + 39² + 18²) = 64.41

Answer

A = 64.41
7.Integrals

Answer: I = 0.3424

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = sin x dx, v = −cos x

Antiderivative

∫x sin x dx = −x cos x + ∫cos x dx = −x cos x + sin x

Limits

(−π/3·cos π/3 + sin π/3) − (0 + 0) = 0.3424

Answer

I = 0.3424
8.Integrals

Answer: I = 0.0609

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

1.649·(1.25) − 1·2 = 0.0609

Answer

I = 0.0609
9.Multivariable calculus

Answer: c = −266

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Value and slopes at the point

f(3, 2) = 82
fx = 4y³ − 4x + 2y → fx(3, 2) = 24
fy = 12xy² − 3y² + 2x → fy(3, 2) = 138

Tangent plane

z = 82 + 24(x − 3) + 138(y − 2)
z = 24x + 138y − 266

Constant term

c = −266

Answer

c = −266
10.Multivariable calculus

Answer: I = 18

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Polar form

I = ∫0π ∫03 r sin θ·r dr dθ

Integrate

∫ r²dr·∫ sin θ dθ
I = 18

Answer

I = 18
11.Sequences & series

Answer: R = 2

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Coefficients

ck/ck+1 = (1/(1/2))·(k + 2)/(k + 1) → 2

Radius

R = 2

Answer

R = 2

The ratio test says nothing at the two end points; they have to be checked separately.

12.Sequences & series

Answer: P₂(0.4) = −0.48

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₂(x) = −x − 0.5x²

Substitute

P₂(0.4) = −0.4 − 0.08 = −0.48

Answer

P₂(0.4) = −0.48

The exact value is f(0.4) = −0.510826; the error −0.0308256 shrinks when you take more terms or a point closer to 0.

13.Laplace transforms

Answer: f(0.1) = 4.445

Laplace transform: F(s) = ∫₀∞ f(t)·e−st dt turns derivatives into multiplications by s: ℒ{f′} = sF(s) − f(0), ℒ{f″} = s²F(s) − s·f(0) − f′(0). Standard pairs: 1 ↔ 1/s, e−at ↔ 1/(s + a), t·e−at ↔ 1/(s + a)², sin ωt ↔ ω/(s² + ω²), cos ωt ↔ s/(s² + ω²), and a shift s → s + σ multiplies the time function by e−σt. To invert a rational F(s), split it into partial fractions: the residue of a simple pole p is A = [(s − p)·F(s)] at s = p. Final value theorem: f(∞) = lims→0 s·F(s), valid only when all poles of s·F(s) lie in the left half-plane. Initial value theorem: f(0⁺) = lims→∞ s·F(s).

Factor the denominator

s² + 6s + 9 = (s + 3)²

Partial fractions

5s + 25 = 5(s + 3) + 10
F(s) = 5/(s + 3) + 10/(s + 3)²

Inverse transform

f(t) = 5·e−3t + 10·t·e−3t
f(0.1) = (5 + 10·0.1)·e−3·0.1 = 4.445

Answer

f(0.1) = 4.445
14.Laplace transforms

Answer: y(0.5) = 2.774

Laplace transform: F(s) = ∫₀∞ f(t)·e−st dt turns derivatives into multiplications by s: ℒ{f′} = sF(s) − f(0), ℒ{f″} = s²F(s) − s·f(0) − f′(0). Standard pairs: 1 ↔ 1/s, e−at ↔ 1/(s + a), t·e−at ↔ 1/(s + a)², sin ωt ↔ ω/(s² + ω²), cos ωt ↔ s/(s² + ω²), and a shift s → s + σ multiplies the time function by e−σt. To invert a rational F(s), split it into partial fractions: the residue of a simple pole p is A = [(s − p)·F(s)] at s = p. Final value theorem: f(∞) = lims→0 s·F(s), valid only when all poles of s·F(s) lie in the left half-plane. Initial value theorem: f(0⁺) = lims→∞ s·F(s).

Transform the equation

s²Y − 4s − 1 + 5(sY − 4) + 6Y = 0
Y(s) = (4s + 21)/((s + 2)(s + 3))

Partial fractions

A = 13/1 = 13
B = 9/(−1) = −9

Result

y(t) = 13·e−2t − 9·e−3t
y(0.5) = 2.774

Answer

y(0.5) = 2.774

Check: y(0) = A + B = 4.

15.Convolution & LTI systems

Answer: y(0.2) = 1.264

Continuous convolution: y(t) = ∫ x(τ)·h(t − τ) dτ. Flip h, slide it to position t and integrate the product of the overlapping parts. For causal signals the integral runs from 0 to t. Useful results: the area of y is the area of x times the area of h; if x lasts from t₁ to t₂ and h from t₃ to t₄, y lasts from t₁ + t₃ to t₂ + t₄. For h(t) = e−atu(t) and a step of height A, y(t) = (A/a)(1 − e−at).

Convolution with a step

y(t) = 10·∫₀ᵗ e−5τ dτ = (10/5)·(1 − e−5t)

Evaluate

y(0.2) = 2·(1 − e−1) = 1.264

Answer

y(0.2) = 1.264
16.Convolution & LTI systems

Answer: c7 = 0.09095

Impulse response and Fourier series: the impulse response h(t) describes an LTI system completely: for y′ + a·y = b·x it is h(t) = b·e−atu(t), and for y[n] = a·y[n − 1] + b·x[n] it is h[n] = b·aⁿu[n]. A sinusoid cos ωt passes through with gain |H(jω)| and phase ∠H(jω), where H is the Fourier transform of h. A periodic signal is a sum of harmonics at k/T: a square wave of ±A has only odd harmonics with amplitudes 4A/(kπ), a triangle wave of peak A has 8A/(π²k²), and a pulse train of height A and duty cycle D has the mean A·D and the harmonics (2A/(kπ))·|sin(kπD)|.

Harmonic number

f₀ = 1/T = 500 Hz → k = 3500/500 = 7

Amplitude

c7 = 4·0.5/(7π) = 0.09095

Answer

c7 = 0.09095

ExamProblems · examproblems.com/courses/engineering-mathematics-2