Engineering Mathematics 2: cram pack

Formula sheets, the key method steps for every topic and 16 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Convolution & LTI systems

Discrete convolution
y[n] = Σ x[k]·h[n − k]
Continuous convolution
y(t) = ∫ x(τ)·h(t − τ) dτ
Length and sum
Ly = Lx + Lh − 1, Σy = Σx·Σh
Start, end and area
t1 + t3 … t2 + t4, ∫y = ∫x·∫h
Step into e^(−at)u(t)
y(t) = (A/a)(1 − e−at)
First-order system
y′ + a·y = b·x → h(t) = b·e−atu(t)
First-order recursion
y[n] = a·y[n − 1] + b·x[n] → h[n] = b·aⁿ
Sinusoid through h(t)
|H(jω)|, ∠H(jω); H(jω) = b/(a + jω)
Fourier series amplitudes
square ±A: 4A/(kπ), odd k; triangle ±A: 8A/(π²k²), odd k; pulse train: A·D and (2A/(kπ))|sin kπD|

Method

  1. Sketch both signals and note where each one is nonzero.
  2. Flip h and slide it: for each output time, find the range where both signals overlap.
  3. Multiply and add (discrete) or multiply and integrate (continuous) over that overlap only.
  4. Check the result: the output starts at the sum of the start times, ends at the sum of the end times, and its area or sum is the product of the input areas or sums.

2Practice problems

1.Differential equationsMedium
t (min)T (°C)17Ta​228 °C149 °C

A forged steel part at 360 °C is left to cool in a workshop at 30 °C. After 17 min its temperature is 228 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). How long after the start, t, does it take to reach 149 °C?

T0 = 360 °CTa = 30 °CT(17) = 228 °CT = 149 °C
t = min
2.Differential equationsHard
tyy(0) = 10y(1.5) = ?

Solve y″ + 2y′ + 5y = 0 with y(0) = 10 and y′(0) = 0 (released from rest). Find y(1.5); angles in radians.

y″ + 2y′ + 5y = 0y(0) = 10y′(0) = 0
y(1.5) =
3.Matrices & determinantsMedium
A =4−41−3−5−25−21

Find the determinant det A of the 3×3 matrix A shown.

A = [4 −4 1; −3 −5 −2; 5 −2 1]
det A =
4.Matrices & determinantsHard
A =−3162

Find the larger eigenvalue λ of the matrix A shown.

A = [−3 1; 6 2]
λ =
5.Vectors: dot & cross productMedium
xyzab

Find the value of k for which the vectors a = (3, 2, 4) and b = (1, −2, k) are perpendicular.

a = (3, 2, 4)b = (1, −2, k)
k =
6.Vectors: dot & cross productHard
xyzab

Find the area A of the parallelogram spanned by a = (6, −3, 0) and b = (−4, 3, 2).

a = (6, −3, 0)b = (−4, 3, 2)
A =
7.IntegralsMedium
xy2y = 2x

The region under y = 2x from x = 0 to x = 2 is rotated about the x-axis. Find the volume V of the solid (a cone).

y = 2x0 ≤ x ≤ 2
V =
8.IntegralsHard
xyy = 2x2​y = 4x

Find the area A of the region enclosed by y = 2x2 and y = 4x.

y = 2x2y = 4x
A =
9.Multivariable calculusMedium

z = 2x²y³ − x² + xy with x = 3t − 1 and y = t² + 2. Use the chain rule to find dz/dt at t = 1.

z = 2x²y³ − x² + xyx = 3t − 1y = t² + 2t = 1
dz/dt =
10.Multivariable calculusHard
xy2

Use polar coordinates to evaluate I = ∬R x dA, where R is the quarter of the disc x² + y² ≤ 4 in the first quadrant.

f = x0 ≤ r ≤ 20 ≤ θ ≤ π/2
I =
11.Sequences & seriesMedium
k|aₖ₊₁/aₖ|123456789101112

Apply the ratio test to Σk=1∞ 3ᵏ·k!/kᵏ. Find L = lim |ak+1/ak|.

ak = 3ᵏ·k!/kᵏ
L =
12.Sequences & seriesHard
xyfP₂0.5

Use the Maclaurin polynomial of degree 2 of f(x) = e3x to approximate f(0.5). Give P₂(0.5).

f(x) = e3xn = 2x = 0.5
P₂(0.5) =
13.Laplace transformsMedium
ReIm5

Find f(t) for F(s) = 27/(s² + 2s + 37) by completing the square, and evaluate f(0.1).

F(s) = 27/(s² + 2s + 37)t = 0.1 s
f(0.1) =
14.Laplace transformsHard
ReIm5

A system is described by the differential equation y″ + 6y′ + 34y = 6u, with input u(t) and output y(t). Find its transfer function G(s) = Y(s)/U(s) (zero initial conditions) and evaluate the impulse response g(t) at t = 0.1 s. Find g(0.1).

y″ + 6y′ + 34y = 6ut = 0.1 s
g(0.1) =
15.Convolution & LTI systemsMedium
x(t)t−11h(t)t15

The signal x(t) is nonzero only between t = −1 s and t = 1 s, and h(t) only between t = 1 s and t = 5 s. Find the time tend at which y(t) = x(t) ∗ h(t) ends.

x: −1 … 1 sh: 1 … 5 s
tend = s
16.Convolution & LTI systemsHard
x(t)t (ms)510204

A square wave switches between 4 and 0 with period T = 10 ms (half a period at each level). Find the amplitude c3 of its Fourier component at 300 Hz.

0 … 4T = 10 msf = 300 Hz
c3 =

3Solutions

1.Differential equations

Answer: t = 33.94 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Cooling constant

k = ln(330/198)/17 = 0.03005 min⁻¹

Time to reach the target

t = ln(330/119)/0.03005 = 33.94 min

Answer

t = 33.94 min
2.Differential equations

Answer: y(1.5) = −2.052

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Complex roots

r = −1 ± 2j

Constants

A = 10, B = 1·10/2 = 5

Evaluate

y(1.5) = e−1.5(10·cos 3 + 5·sin 3) = −2.052

Answer

y(1.5) = −2.052
3.Matrices & determinants

Answer: det A = 23

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −9, M₁₂ = 7, M₁₃ = 31

Cofactor expansion

det A = 4·(−9) − (−4)·7 + 1·31 = 23

Answer

det A = 23
4.Matrices & determinants

Answer: λ = 3

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (−1)λ + (−12) = 0

Solve

λ = (−1 ± √(49))/2 → λ = −4, 3
λ = 3

Answer

λ = 3
5.Vectors: dot & cross product

Answer: k = 0.25

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product equals zero

a·b = 3·1 + 2·(−2) + 4·k = 0
−1 + 4·k = 0

Solve for k

k = −(−1)/4 = 0.25

Answer

k = 0.25
6.Vectors: dot & cross product

Answer: A = 14.7

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product

(a × b)x = aybz − azby = (−3)·2 − 0·3 = −6
(a × b)y = azbx − axbz = 0·(−4) − 6·2 = −12
(a × b)z = axby − aybx = 6·3 − (−3)·(−4) = 6

Area

A = |a × b| = √((−6)² + (−12)² + 6²) = 14.7

Answer

A = 14.7
7.Integrals

Answer: V = 33.51

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Disc method

V = π∫₀2 4x² dx

Integrate

V = π·4·2³/3 = 33.51

Answer

V = 33.51

Check: a cone of radius 4 and height 2 has (1/3)πr²h = 33.51.

8.Integrals

Answer: A = 2.667

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

2x2 = 4x → x = 0, x = 2

Integrate upper minus lower

A = [2x2 − 0.6667x3]02 = 2.667

Answer

A = 2.667
9.Multivariable calculus

Answer: dz/dt = 1081

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Point and rates

x(1) = 2, y(1) = 3
dx/dt = 3, dy/dt = 2t = 2

Partial derivatives

fx = 4xy³ − 2x + y = 215
fy = 6x²y² + x = 218

Chain rule

dz/dt = 215·3 + 218·2 = 1081

Answer

dz/dt = 1081
10.Multivariable calculus

Answer: I = 2.667

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Polar form

I = ∫0π/2 ∫02 r cos θ·r dr dθ

Integrate

∫ r²dr·∫ cos θ dθ
I = 2.667

Answer

I = 2.667
11.Sequences & series

Answer: L = 1.104

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Ratio of consecutive terms

|ak+1/ak| = 3·(k/(k + 1))ᵏ = 3/(1 + 1/k)ᵏ → 3/e

Conclusion

L = 1.104 > 1

Answer

L = 1.104

L > 1, so the series diverges.

12.Sequences & series

Answer: P₂(0.5) = 3.625

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₂(x) = 1 + 3x + 4.5x²

Substitute

P₂(0.5) = 1 + 1.5 + 1.125 = 3.625

Answer

P₂(0.5) = 3.625

The exact value is f(0.5) = 4.481689; the error 0.856689 shrinks when you take more terms or a point closer to 0.

13.Laplace transforms

Answer: f(0.1) = 2.299

Laplace transform: F(s) = ∫₀∞ f(t)·e−st dt turns derivatives into multiplications by s: ℒ{f′} = sF(s) − f(0), ℒ{f″} = s²F(s) − s·f(0) − f′(0). Standard pairs: 1 ↔ 1/s, e−at ↔ 1/(s + a), t·e−at ↔ 1/(s + a)², sin ωt ↔ ω/(s² + ω²), cos ωt ↔ s/(s² + ω²), and a shift s → s + σ multiplies the time function by e−σt. To invert a rational F(s), split it into partial fractions: the residue of a simple pole p is A = [(s − p)·F(s)] at s = p. Final value theorem: f(∞) = lims→0 s·F(s), valid only when all poles of s·F(s) lie in the left half-plane. Initial value theorem: f(0⁺) = lims→∞ s·F(s).

Complete the square

s² + 2s + 37 = (s + 1)² + 36 = (s + 1)² + 6²

Match the numerator

F(s) = (27/6)·6/((s + 1)² + 6²)

Inverse transform

f(t) = e−t·(4.5·sin 6t)
f(0.1) = e−0.1·(4.5·sin(6·0.1)) = 2.299

Answer

f(0.1) = 2.299
14.Laplace transforms

Answer: g(0.1) = 0.4262

Laplace transform: F(s) = ∫₀∞ f(t)·e−st dt turns derivatives into multiplications by s: ℒ{f′} = sF(s) − f(0), ℒ{f″} = s²F(s) − s·f(0) − f′(0). Standard pairs: 1 ↔ 1/s, e−at ↔ 1/(s + a), t·e−at ↔ 1/(s + a)², sin ωt ↔ ω/(s² + ω²), cos ωt ↔ s/(s² + ω²), and a shift s → s + σ multiplies the time function by e−σt. To invert a rational F(s), split it into partial fractions: the residue of a simple pole p is A = [(s − p)·F(s)] at s = p. Final value theorem: f(∞) = lims→0 s·F(s), valid only when all poles of s·F(s) lie in the left half-plane. Initial value theorem: f(0⁺) = lims→∞ s·F(s).

Transfer function

G(s) = Y(s)/U(s) = 6/(s² + 6s + 34)

Partial fractions

s² + 6s + 34 = (s + 3)² + 5²
G(s) = (6/5)·5/((s + 3)² + 5²)

Impulse response

g(t) = e−3t·(1.2·sin 5t)
g(0.1) = 0.4262

Answer

g(0.1) = 0.4262
15.Convolution & LTI systems

Answer: tend = 6 s

Continuous convolution: y(t) = ∫ x(τ)·h(t − τ) dτ. Flip h, slide it to position t and integrate the product of the overlapping parts. For causal signals the integral runs from 0 to t. Useful results: the area of y is the area of x times the area of h; if x lasts from t₁ to t₂ and h from t₃ to t₄, y lasts from t₁ + t₃ to t₂ + t₄. For h(t) = e−atu(t) and a step of height A, y(t) = (A/a)(1 − e−at).

Start and end

tstart = −1 + 1 = 0 s
tend = 1 + 5 = 6 s

Answer

tend = 6 s

Answer

tend = 6 s
16.Convolution & LTI systems

Answer: c3 = 0.8488

Impulse response and Fourier series: the impulse response h(t) describes an LTI system completely: for y′ + a·y = b·x it is h(t) = b·e−atu(t), and for y[n] = a·y[n − 1] + b·x[n] it is h[n] = b·aⁿu[n]. A sinusoid cos ωt passes through with gain |H(jω)| and phase ∠H(jω), where H is the Fourier transform of h. A periodic signal is a sum of harmonics at k/T: a square wave of ±A has only odd harmonics with amplitudes 4A/(kπ), a triangle wave of peak A has 8A/(π²k²), and a pulse train of height A and duty cycle D has the mean A·D and the harmonics (2A/(kπ))·|sin(kπD)|.

Harmonic number

f₀ = 1/T = 100 Hz → k = 300/100 = 3

Amplitude

c3 = 4·2/(3π) = 0.8488

Answer

c3 = 0.8488

ExamProblems · examproblems.com/courses/engineering-mathematics-2