Engineering Mathematics 2: cram pack

Formula sheets, the key method steps for every topic and 16 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Multivariable calculus

Partial derivatives
fx = ∂f/∂x (y constant), fxy = fyx
Gradient
∇f = (fx, fy), largest slope |∇f|
Directional derivative
Duf = ∇f·u, u = v/|v|
Tangent plane
z = f(a, b) + fx(x − a) + fy(y − b)
Chain rule
dz/dt = fx·dx/dt + fy·dy/dt
Second-derivative test
D = fxxfyy − fxy²: D > 0, fxx > 0 minimum; D > 0, fxx < 0 maximum; D < 0 saddle
Double integral
∬R f dA = ∫ab∫g(x)h(x) f dy dx
Polar coordinates
x = r cos θ, y = r sin θ, dA = r dr dθ

Method

  1. For a partial derivative, treat the other variable as a constant and use the one-variable rules.
  2. For gradient questions compute ∇f = (fx, fy) at the point; use |∇f| for the steepest slope and ∇f·u with a unit vector u for a directional derivative.
  3. For extrema solve fx = 0 and fy = 0 together, then classify every point with D = fxx·fyy − fxy².
  4. For a double integral sketch the region, choose the order (or polar coordinates for discs) so the inner limits are the bounding curves, and integrate inside first.

Sequences & series

Arithmetic sequence
aₙ = a₁ + (n − 1)d, Sₙ = n(a₁ + aₙ)/2
Geometric sequence
aₙ = a₁rⁿ⁻¹, Sₙ = a₁(1 − rⁿ)/(1 − r)
Infinite geometric series
S = a₁/(1 − r), |r| < 1
p-series
Σ1/kᵖ converges only for p > 1
Ratio test
L = lim |ak+1/ak|: L < 1 converges, L > 1 diverges
Radius of convergence
R = lim |ck/ck+1|
Taylor polynomial
Pₙ(x) = Σ f⁽ᵏ⁾(a)(x − a)ᵏ/k!
Maclaurin series
eˣ = Σxᵏ/k!, sin x = x − x³/3! + …, cos x = 1 − x²/2! + …, ln(1 + x) = x − x²/2 + …
Lagrange error bound
|Rₙ| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!

Method

  1. Identify the type: arithmetic (constant difference), geometric (constant ratio), a standard series, a power series or a Taylor polynomial.
  2. For sums use Sₙ = n(a₁ + aₙ)/2, Sₙ = a₁(1 − rⁿ)/(1 − r), or S = a₁/(1 − r) when |r| < 1, with a₁ the first term of the sum.
  3. For convergence: n-th term test first, then compare with Σ1/kᵖ or a geometric series, and use the ratio or root test for factorials and k-th powers.
  4. For Taylor polynomials list f(a), f′(a), f″(a), …, divide the k-th derivative by k!, and bound the error with M·|x − a|ⁿ⁺¹/(n + 1)!.

Convolution & LTI systems

Discrete convolution
y[n] = Σ x[k]·h[n − k]
Continuous convolution
y(t) = ∫ x(τ)·h(t − τ) dτ
Length and sum
Ly = Lx + Lh − 1, Σy = Σx·Σh
Start, end and area
t1 + t3 … t2 + t4, ∫y = ∫x·∫h
Step into e^(−at)u(t)
y(t) = (A/a)(1 − e−at)
First-order system
y′ + a·y = b·x → h(t) = b·e−atu(t)
First-order recursion
y[n] = a·y[n − 1] + b·x[n] → h[n] = b·aⁿ
Sinusoid through h(t)
|H(jω)|, ∠H(jω); H(jω) = b/(a + jω)
Fourier series amplitudes
square ±A: 4A/(kπ), odd k; triangle ±A: 8A/(π²k²), odd k; pulse train: A·D and (2A/(kπ))|sin kπD|

Method

  1. Sketch both signals and note where each one is nonzero.
  2. Flip h and slide it: for each output time, find the range where both signals overlap.
  3. Multiply and add (discrete) or multiply and integrate (continuous) over that overlap only.
  4. Check the result: the output starts at the sum of the start times, ends at the sum of the end times, and its area or sum is the product of the input areas or sums.

2Practice problems

1.Differential equationsMedium
tyy(0) = 3y(1.5) = ?

Solve y″ + 2y′ + y = 0 with y(0) = 3 and y′(0) = -2. Find y(1.5).

y″ + 2y′ + y = 0y(0) = 3y′(0) = -2
y(1.5) =
2.Differential equationsHard
tyK = 2ymax​ = ?

A system obeys y″ + 4y′ + 29y = 58 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find the peak value ymax of its step response.

y″ + 4y′ + 29y = 58y(0) = 0y′(0) = 0
ymax =
3.Matrices & determinantsMedium
A =−4−3−15−1−35−33

Find the determinant det A of the 3×3 matrix A shown.

A = [−4 −3 −1; 5 −1 −3; 5 −3 3]
det A =
4.Matrices & determinantsHard
A =−4−3−4−6b =1012

Solve the system −4x − 3y = 10 and −4x − 6y = 12. Find x.

−4x − 3y = 10−4x − 6y = 12
x =
5.Vectors: dot & cross productMedium
xyzdFAB

A constant force F = (−30, −25, 15) N acts on an object while it moves in a straight line from point A(−1, −2, 5) to point B(−3, 4, −3). Coordinates are in metres. Find the work W done by the force.

F = (−30, −25, 15) NA(−1, −2, 5) mB(−3, 4, −3) m
W = J
6.Vectors: dot & cross productHard
xyzab

The unit vector n̂ is perpendicular to both a = (−2, −3, 0) and b = (−5, 3, −4) and has a positive z-component. Find its y-component n̂y.

a = (−2, −3, 0)b = (−5, 3, −4)n̂z > 0
n̂y =
7.IntegralsMedium
xy13

Evaluate I = ∫13 1/x dx.

f(x) = 1/x[1, 3]
I =
8.IntegralsHard
xyy = x2​y = 3x

Find the area A of the region enclosed by y = x2 and y = 3x.

y = x2y = 3x
A =
9.Multivariable calculusMedium
xy20.5P

The tangent plane to z = 2 sin(3x + y) at the point where (x, y) = (2, 0.5) can be written as z = px + qy + c. Find c.

f(x, y) = 2 sin(3x + y)(a, b) = (2, 0.5)
c =
10.Multivariable calculusHard
xy−50−4−202AB

The marked points are the critical points of f(x, y) = x³ + y³ + 9xy. Click the saddle point.

f(x, y) = x³ + y³ + 9xy
  1. 1A (0, 0)
  2. 2B (−3, −3)
11.Sequences & seriesMedium
xx₀ = 0??R

Find the radius of convergence R of the power series Σk=1∞ 3ᵏ·xᵏ/(k + 1).

Σ 3ᵏ·xᵏ/(k + 1)x₀ = 0
R =
12.Sequences & seriesHard
xyfP₂0.5

Use the Maclaurin polynomial of degree 2 of f(x) = 1/(1 − x) to approximate f(0.5). Give P₂(0.5).

f(x) = 1/(1 − x)n = 2x = 0.5
P₂(0.5) =
13.Laplace transformsMedium
ReIm−0.5−10.51

Find f(t) for F(s) = 8/(s² + 2s + 2) by completing the square, and evaluate f(0.8).

F(s) = 8/(s² + 2s + 2)t = 0.8 s
f(0.8) =
14.Laplace transformsHard
t (s)y(t)t = 0.4y(0.4) = ?

Solve y″ + 5y′ + 4y = 0 with y(0) = −7 and y′(0) = −13 using the Laplace transform, and find y(0.4).

y″ + 5y′ + 4y = 0y(0) = −7y′(0) = −13t = 0.4 s
y(0.4) =
15.Convolution & LTI systemsMedium
x(t)t13h(t)t34

The signal x(t) is nonzero only between t = 1 s and t = 3 s, and h(t) only between t = 3 s and t = 4 s. Find the duration D of y(t) = x(t) ∗ h(t).

x: 1 … 3 sh: 3 … 4 s
D = s
16.Convolution & LTI systemsHard
δ[n]3+h[n]0.9·z⁻¹+

A system obeys y[n] = 0.9·y[n − 1] + 3·x[n] and starts at rest. Find its impulse response sample h[5].

y[n] = 0.9y[n − 1] + 3x[n]x[n] = δ[n]
h[5] =

3Solutions

1.Differential equations

Answer: y(1.5) = 1.004

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Double root

(r + 1)² = 0 → r = −1

Constants

A = y(0) = 3
y′(0) = B − 1A → B = -2 + 3 = 1

Evaluate

y(1.5) = (3 + 1·1.5)·e−1.5 = 1.004

Answer

y(1.5) = 1.004
2.Differential equations

Answer: ymax = 2.569

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 2, r = −2 ± 5j

Constants from the initial values

y(0) = 2 + A = 0 → A = −2
y′(0) = −2A + 5B = 0 → B = −0.8

Peak

t = π/5 = 0.6283
ymax = 2·(1 + e−2·π/5) = 2.569

Answer

ymax = 2.569
3.Matrices & determinants

Answer: det A = 148

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −12, M₁₂ = 30, M₁₃ = −10

Cofactor expansion

det A = (−4)·(−12) − (−3)·30 + (−1)·(−10) = 148

Answer

det A = 148
4.Matrices & determinants

Answer: x = −2

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = (−4)·(−6) − (−3)·(−4) = 12

Replace the x column

det Aₓ = 10·(−6) − (−3)·12 = −24
x = −24/12 = −2

Answer

x = −2
y = −0.6667
5.Vectors: dot & cross product

Answer: W = −210 J

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Displacement

d = B − A = (−3, 4, −3) − (−1, −2, 5) = (−2, 6, −8) m

Work

W = F·d = (−30)·(−2) + (−25)·6 + 15·(−8) = −210 J

Answer

W = −210 J

Negative work: the force acts mostly against the motion.

6.Vectors: dot & cross product

Answer: n̂y = 0.314

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product

(a × b)x = aybz − azby = (−3)·(−4) − 0·3 = 12
(a × b)y = azbx − axbz = 0·(−5) − (−2)·(−4) = −8
(a × b)z = axby − aybx = (−2)·3 − (−3)·(−5) = −21

Normalise

The z-component of a × b is negative, so use −(a × b).

|a × b| = √(12² + (−8)² + (−21)²) = 25.48
n̂ = −(12, −8, −21)/25.48 = (−0.471, 0.314, 0.8243)
n̂y = 0.314

Answer

n̂y = 0.314
7.Integrals

Answer: I = 1.099

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = ln x

Evaluate at the limits

I = (ln 3 − ln 1) = ln 3 = 1.099

Answer

I = 1.099
8.Integrals

Answer: A = 4.5

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

x2 = 3x → x = 0, x = 3

Integrate upper minus lower

A = [1.5x2 − 0.3333x3]03 = 4.5

Answer

A = 4.5
9.Multivariable calculus

Answer: c = −12.27

Gradient: ∇f = (fx, fy) points in the direction of steepest ascent, and |∇f| is the largest rate of change. The directional derivative along a direction v is Duf = ∇f·u with the unit vector u = v/|v|. The tangent plane at (a, b) is z = f(a, b) + fx(a, b)(x − a) + fy(a, b)(y − b); it gives the linear approximation of f near that point. Chain rule: dz/dt = fx·dx/dt + fy·dy/dt.

Value and slopes at the point

f(2, 0.5) = 0.4302
fx = 6 cos(3x + y) → fx(2, 0.5) = 5.86
fy = 2 cos(3x + y) → fy(2, 0.5) = 1.953

Tangent plane

z = 0.4302 + 5.86(x − 2) + 1.953(y − 0.5)
z = 5.86x + 1.953y − 12.27

Constant term

c = −12.27

Answer

c = −12.27
10.Multivariable calculus

Answer: A (0, 0)

Critical points and double integrals: a critical point has fx = fy = 0. Second-derivative test with D = fxxfyy − fxy²: D > 0 and fxx > 0 is a local minimum, D > 0 and fxx < 0 a local maximum, D < 0 a saddle point, and D = 0 decides nothing. For a double integral over a general region, let the inner limits be the curves that bound the region; for discs and sectors use polar coordinates, x = r cos θ, y = r sin θ and dA = r dr dθ (do not forget the factor r).

Critical points

Solve fx = 0 and fy = 0 together.

fx = 3x² + 9y = 0
fy = 3y² + 9x = 0
(0, 0), (−3, −3)

Second-derivative test

(0, 0): fxx = 0, fyy = 0, fxy = 9, D = −81 → saddle point
(−3, −3): fxx = −18, fyy = −18, fxy = 9, D = 243 → local maximum

The point

A (0, 0): saddle point

Answer

A (0, 0)
11.Sequences & series

Answer: R = 0.3333

Convergence: if the terms do not tend to 0 the series diverges (n-th term test). Σ1/kᵖ converges only for p > 1, and Σrᵏ only for |r| < 1. Compare a series with one of these when its terms behave like them for large k. Ratio test: L = lim |ak+1/ak|; root test: L = lim |ak|1/k. L < 1 converges, L > 1 diverges, L = 1 decides nothing. A power series Σck(x − x₀)ᵏ converges for |x − x₀| < R with R = lim |ck/ck+1|; an alternating series with terms decreasing to 0 converges.

Coefficients

ck/ck+1 = (1/3)·(k + 2)/(k + 1) → 0.3333

Radius

R = 0.3333

Answer

R = 0.3333

The ratio test says nothing at the two end points; they have to be checked separately.

12.Sequences & series

Answer: P₂(0.5) = 1.75

Taylor polynomials: near x = a a smooth function is approximated by Pₙ(x) = f(a) + f′(a)(x − a) + f″(a)(x − a)²/2! + … + f⁽ⁿ⁾(a)(x − a)ⁿ/n!; for a = 0 this is the Maclaurin polynomial. Standard series: eˣ = Σxᵏ/k!, sin x = x − x³/3! + x⁵/5! − …, cos x = 1 − x²/2! + x⁴/4! − …, ln(1 + x) = x − x²/2 + x³/3 − …, 1/(1 − x) = Σxᵏ. Lagrange error bound: |f(x) − Pₙ(x)| ≤ M·|x − a|ⁿ⁺¹/(n + 1)!, where M is the largest value of |f⁽ⁿ⁺¹⁾| between a and x.

Maclaurin polynomial

P₂(x) = 1 + x + x²

Substitute

P₂(0.5) = 1 + 0.5 + 0.25 = 1.75

Answer

P₂(0.5) = 1.75

The exact value is f(0.5) = 2; the error 0.25 shrinks when you take more terms or a point closer to 0.

13.Laplace transforms

Answer: f(0.8) = 2.579

Laplace transform: F(s) = ∫₀∞ f(t)·e−st dt turns derivatives into multiplications by s: ℒ{f′} = sF(s) − f(0), ℒ{f″} = s²F(s) − s·f(0) − f′(0). Standard pairs: 1 ↔ 1/s, e−at ↔ 1/(s + a), t·e−at ↔ 1/(s + a)², sin ωt ↔ ω/(s² + ω²), cos ωt ↔ s/(s² + ω²), and a shift s → s + σ multiplies the time function by e−σt. To invert a rational F(s), split it into partial fractions: the residue of a simple pole p is A = [(s − p)·F(s)] at s = p. Final value theorem: f(∞) = lims→0 s·F(s), valid only when all poles of s·F(s) lie in the left half-plane. Initial value theorem: f(0⁺) = lims→∞ s·F(s).

Complete the square

s² + 2s + 2 = (s + 1)² + 1 = (s + 1)² + 1²

Match the numerator

F(s) = (8/1)·1/((s + 1)² + 1²)

Inverse transform

f(t) = e−t·(8·sin 1t)
f(0.8) = e−0.8·(8·sin(1·0.8)) = 2.579

Answer

f(0.8) = 2.579
14.Laplace transforms

Answer: y(0.4) = −7.815

Laplace transform: F(s) = ∫₀∞ f(t)·e−st dt turns derivatives into multiplications by s: ℒ{f′} = sF(s) − f(0), ℒ{f″} = s²F(s) − s·f(0) − f′(0). Standard pairs: 1 ↔ 1/s, e−at ↔ 1/(s + a), t·e−at ↔ 1/(s + a)², sin ωt ↔ ω/(s² + ω²), cos ωt ↔ s/(s² + ω²), and a shift s → s + σ multiplies the time function by e−σt. To invert a rational F(s), split it into partial fractions: the residue of a simple pole p is A = [(s − p)·F(s)] at s = p. Final value theorem: f(∞) = lims→0 s·F(s), valid only when all poles of s·F(s) lie in the left half-plane. Initial value theorem: f(0⁺) = lims→∞ s·F(s).

Transform the equation

s²Y − (−7)s − (−13) + 5(sY − (−7)) + 4Y = 0
Y(s) = (−7s − 48)/((s + 1)(s + 4))

Partial fractions

A = −41/3 = −13.67
B = −20/(−3) = 6.667

Result

y(t) = −13.67·e−t + 6.667·e−4t
y(0.4) = −7.815

Answer

y(0.4) = −7.815

Check: y(0) = A + B = −7.

15.Convolution & LTI systems

Answer: D = 3 s

Continuous convolution: y(t) = ∫ x(τ)·h(t − τ) dτ. Flip h, slide it to position t and integrate the product of the overlapping parts. For causal signals the integral runs from 0 to t. Useful results: the area of y is the area of x times the area of h; if x lasts from t₁ to t₂ and h from t₃ to t₄, y lasts from t₁ + t₃ to t₂ + t₄. For h(t) = e−atu(t) and a step of height A, y(t) = (A/a)(1 − e−at).

Start and end

tstart = 1 + 3 = 4 s
tend = 3 + 4 = 7 s

Answer

D = 3 s

Answer

D = 3 s
16.Convolution & LTI systems

Answer: h[5] = 1.771

Impulse response and Fourier series: the impulse response h(t) describes an LTI system completely: for y′ + a·y = b·x it is h(t) = b·e−atu(t), and for y[n] = a·y[n − 1] + b·x[n] it is h[n] = b·aⁿu[n]. A sinusoid cos ωt passes through with gain |H(jω)| and phase ∠H(jω), where H is the Fourier transform of h. A periodic signal is a sum of harmonics at k/T: a square wave of ±A has only odd harmonics with amplitudes 4A/(kπ), a triangle wave of peak A has 8A/(π²k²), and a pulse train of height A and duty cycle D has the mean A·D and the harmonics (2A/(kπ))·|sin(kπD)|.

Iterate

h[0] = 3
h[1] = 2.7
h[2] = 2.43
h[3] = 2.187
h[4] = 1.968
h[5] = 1.771

Result

h[5] = 3·(0.9)5 = 1.771

Answer

h[5] = 1.771

ExamProblems · examproblems.com/courses/engineering-mathematics-2