Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(4x2 − 7x) − 2x).

f(x) = √(4x2 − 7x) − 2xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 5x)/(2x²), with x in radians.

f(x) = (1 − cos 5x)/(2x²)x → 0
L =
3.DerivativesMedium
xyx = 0.5

Let f(x) = x·sin(2x), with x in radians. Find f′(0.5).

f(x) = x·sin(2x)x = 0.5 rad
f′(0.5) =
4.DerivativesHard
xyx = −2

The tangent line to f(x) = −x2 + 3x − 6 at x = −2 crosses the y-axis at y = b. Find b.

f(x) = −x2 + 3x − 6x = −2
b =
5.IntegralsMedium
xy12.5y = x ln x

Evaluate I = ∫₁2.5 x·ln x dx.

∫₁2.5 x ln x dx
I =
6.IntegralsHard
xy−22

Find the area A of the region between the parabola y = 4 − x² and the x-axis.

y = 4 − x²
A =
7.Complex numbersMedium
ReIm55−5−5θz

Find the argument θ of z = −5 + j7 in degrees, as the principal value between −180° and 180°.

z = −5 + j7
θ = °
8.Complex numbersHard
ReIm11−1−122−2−233−3−3z₀z₁z₂z₃z₄z₅

The roots of zⁿ = w with n = 6 and w = 729∠180° are zk = R1/n∠((φ + 360°·k)/n), k = 0, 1, …, 5. Find the imaginary part of z₄.

w = 729∠180°n = 6k = 4
Im(z₄) =
9.Differential equationsMedium
t (min)T (°C)18Ta​38 °C58 °C

A cup of coffee at 89 °C is left in a room at 18 °C. After 18 min its temperature is 38 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). How long after the start, t, does it take to reach 58 °C?

T0 = 89 °CTa = 18 °CT(18) = 38 °CT = 58 °C
t = min
10.Differential equationsHard
tyK = 5y(0.5) = ?

A system obeys y″ + 3y′ + 11.25y = 56.25 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find y(0.5); angles in radians.

y″ + 3y′ + 11.25y = 56.25y(0) = 0y′(0) = 0
y(0.5) =
11.Matrices & determinantsMedium
A =−3−330−222−2−5

Find the determinant det A of the 3×3 matrix A shown.

A = [−3 −3 3; 0 −2 2; 2 −2 −5]
det A =
12.Matrices & determinantsHard
A =417−2

Find the larger eigenvalue λ of the matrix A shown.

A = [4 1; 7 −2]
λ =
13.Vectors: dot & cross productMedium
xyzdFAB

A constant force F = (−5, −15, −30) N acts on an object while it moves in a straight line from point A(−5, 4, −4) to point B(−4, 3, 0). Coordinates are in metres. Find the work W done by the force.

F = (−5, −15, −30) NA(−5, 4, −4) mB(−4, 3, 0) m
W = J
14.Vectors: dot & cross productHard
xyzabc

Find the volume V of the parallelepiped whose edges from one corner are a = (4, 0, −1), b = (−4, −5, −3) and c = (4, 3, 1).

a = (4, 0, −1)b = (−4, −5, −3)c = (4, 3, 1)
V =
15.ProbabilityMedium
n = 7k = 5N = ?

In how many ways N can a committee of 5 people be chosen from a group of 7? The order does not matter.

n = 7k = 5
N =
16.ProbabilityHard
xp(x)10.2520.330.240.25μ

X has the distribution shown, and Y = 5X + 4. Find the standard deviation σY of Y.

x: 1, 2, 3, 4p(x): 0.25, 0.3, 0.2, 0.25Y = 5X + 4
σY =
17.Descriptive statisticsMedium
2025303540

Find the sample standard deviation s of the data: 18, 19, 31, 35, 42, 41, 28.

n = 7
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 70 and standard deviation 20. What proportion P of values is above 82?

μ = 70σ = 20x = 82
P =
19.Normal distributionMedium
−3−2−10123zshaded area between −z and z = 0.6211

Drag z so that the shaded area between −z and z under the standard normal curve is 0.6211. Find z to two decimals.

A = 0.6211
z =
20.Normal distributionHard
35455565758595pointsbottom 85%

The exam scores are normally distributed with mean 65 points and standard deviation 10 points. Drag the cut-off so the shaded bottom 85% is to the left of it. Find the cut-off x.

μ = 65 pointsσ = 10 points85%
x = points

3Solutions

1.Limits

Answer: L = −1.75

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = −7x/(√(4x2 − 7x) + 2x)

Divide by x

f(x) = −7/(√(4 + (−7)/x) + 2)

Let x → ∞

L = −7/(2 + 2) = −1.75

Answer

L = −1.75
2.Limits

Answer: L = 6.25

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

5·sin 5x/(4x) → 0/0

Second application

25·cos 5x/4

Substitute x = 0

L = 25/4 = 6.25

Answer

L = 6.25
3.Derivatives

Answer: f′(0.5) = 1.382

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Product and chain rule

f′(x) = sin(2x) + 2x·cos(2x)

Substitute

f′(0.5) = 0.8415 + 1·0.5403 = 1.382

Answer

f′(0.5) = 1.382
4.Derivatives

Answer: b = −2

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(−2) = −16
f′(x) = −2x + 3 → f′(−2) = 7

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = −16 − 7·(−2) = −2

Answer

b = −2
5.Integrals

Answer: I = 1.551

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = ln x, du = dx/x; dv = x dx, v = x²/2

Antiderivative

∫x ln x dx = (x²/2)ln x − ∫(x/2) dx = (x²/2)ln x − x²/4

Limits

(3.125·ln 2.5 − 1.5625) − (0 − 0.25) = 1.551

Answer

I = 1.551
6.Integrals

Answer: A = 10.67

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

4 − x² = 0 → x = ±2

Integrate

A = [4x − x³/3]−22 = 5.333 − (−5.333) = 10.67

Answer

A = 10.67
7.Complex numbers

Answer: θ = 125.5 °

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Quadrant

a = −5, b = 7 → II

Reference angle

α = atan(7/5) = 54.46°

Argument

θ = 180° − α = 125.5°

Answer

θ = 125.5°

In polar form z = 8.602∠125.5°.

8.Complex numbers

Answer: Im(z₄) = −3

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus of the roots

7291/6 = 3

Argument of the root

θ₄ = (180° + 360°·4)/6 = 270° → −90°

Rectangular form

z₄ = 3·(cos −90° + j sin −90°) = −j3
Im(z₄) = −3

Answer

Im(z₄) = −3

The 6 roots lie on the circle of radius 3, 60° apart.

9.Differential equations

Answer: t = 8.152 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Cooling constant

k = ln(71/20)/18 = 0.07039 min⁻¹

Time to reach the target

t = ln(71/40)/0.07039 = 8.152 min

Answer

t = 8.152 min
10.Differential equations

Answer: y(0.5) = 3.655

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Steady value and roots

yss = 5, r = −1.5 ± 3j

Constants from the initial values

y(0) = 5 + A = 0 → A = −5
y′(0) = −1.5A + 3B = 0 → B = −2.5

Evaluate

y(0.5) = 5·(1 − e−0.75(cos 1.5 + 0.5·sin 1.5)) = 3.655

Answer

y(0.5) = 3.655
11.Matrices & determinants

Answer: det A = −42

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = 14, M₁₂ = −4, M₁₃ = 4

Cofactor expansion

det A = (−3)·14 − (−3)·(−4) + 3·4 = −42

Answer

det A = −42
12.Matrices & determinants

Answer: λ = 5

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (2)λ + (−15) = 0

Solve

λ = (2 ± √(64))/2 → λ = −3, 5
λ = 5

Answer

λ = 5
13.Vectors: dot & cross product

Answer: W = −110 J

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Displacement

d = B − A = (−4, 3, 0) − (−5, 4, −4) = (1, −1, 4) m

Work

W = F·d = (−5)·1 + (−15)·(−1) + (−30)·4 = −110 J

Answer

W = −110 J

Negative work: the force acts mostly against the motion.

14.Vectors: dot & cross product

Answer: V = 8

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product b × c

(b × c)x = bycz − bzcy = (−5)·1 − (−3)·3 = 4
(b × c)y = bzcx − bxcz = (−3)·4 − (−4)·1 = −8
(b × c)z = bxcy − bycx = (−4)·3 − (−5)·4 = 8

Dot product with a

a·(b × c) = 4·4 + 0·(−8) + (−1)·8 = 8
V = |8| = 8

Answer

V = 8
15.Probability

Answer: N = 21

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Combinations

C(7, 5) = (7·6·5·4·3)/(5·4·3·2·1) = 21

Answer

N = 21
16.Probability

Answer: σY = 5.585

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Spread of X

μ = 2.45, Var(X) = 1.247, σX = 1.117

Linear change

σY = |5|·1.117 = 5.585

Answer

σY = 5.585

The mean does move: E(Y) = 5·2.45 + 4 = 16.25.

17.Descriptive statistics

Answer: s = 9.641

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 214/7 = 30.57

Squared deviations

Σ(x − x̄)² = (−12.57)² + (−11.57)² + 0.4286² + 4.429² + 11.43² + 10.43² + (−2.571)² = 557.7

Standard deviation

s = √(557.7/6) = 9.641

Answer

s = 9.641
18.Descriptive statistics

Answer: P = 0.2743

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 0.6

Standard normal table

Φ(0.6) = 0.7257
P = 1 − 0.7257 = 0.2743

Answer

P = 0.2743
19.Normal distribution

Answer: z = 0.88

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left of z

Φ(z) = (1 + 0.6211)/2 = 0.8106

Read the z-table backwards

Find 0.8106 inside the table and read off z.

z = 0.88

Answer

z = 0.88
20.Normal distribution

Answer: x = 75.4 points

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.85

z from the table

z ≈ 1.04

Back to the original units

x = 65 + 1.04·10 = 75.4 points

Answer

x = 75.4 points

ExamProblems · examproblems.com/courses/engineering-mathematics