Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (6x2 − 2x + 9)/(x2 + 3x + 6).

f(x) = (6x2 − 2x + 9)/(x2 + 3x + 6)x → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 2x)/(4x²), with x in radians.

f(x) = (1 − cos 2x)/(4x²)x → 0
L =
3.DerivativesMedium
xyx = 0.5

Let f(x) = x·sin(3x), with x in radians. Find f′(0.5).

f(x) = x·sin(3x)x = 0.5 rad
f′(0.5) =
4.DerivativesHard
xyx = 3

The tangent line to f(x) = 2x2 + 2x + 4 at x = 3 crosses the y-axis at y = b. Find b.

f(x) = 2x2 + 2x + 4x = 3
b =
5.IntegralsMedium
xy01

Evaluate I = ∫01 e−x dx.

f(x) = e−x[0, 1]
I =
6.IntegralsHard
xy−33

Find the area A of the region between the parabola y = 9 − x² and the x-axis.

y = 9 − x²
A =
7.Complex numbersMedium
ReIm22−2−244−4−4z₁z₂w

Given z₁ = 2∠150° and z₂ = 2∠−50°, find the real part of w = z₁·z₂.

z₁ = 2∠150°z₂ = 2∠−50°
Re(w) =
8.Complex numbersHard
ReIm22−2−244−4−466−6−6ABCD

Exactly one of the points A–D is a root of z⁶ = 729∠−90°. Click it.

w = 729∠−90°n = 6
  1. 1A (3∠75°)
  2. 2B (3∠−90°)
  3. 3C (3∠45°)
  4. 4D (5.4∠75°)
9.Differential equationsMedium
tyy(0) = 2y(1.5) = ?

Solve y″ + 6y′ + 5y = 0 with y(0) = 2 and y′(0) = 4. Find y(1.5).

y″ + 6y′ + 5y = 0y(0) = 2y′(0) = 4
y(1.5) =
10.Differential equationsHard
ty1.5y(1.5) = ?

Solve y′ + 0.5y = 2e−3t with y(0) = 0. Find y(1.5).

y′ + 0.5y = 2e−3ty(0) = 0
y(1.5) =
11.Matrices & determinantsMedium
A =506−3B =0−53−1

Let C = AB for the matrices shown. Find the entry c21 (row 2, column 1).

A = [5 0; 6 −3]B = [0 −5; 3 −1]
c21 =
12.Matrices & determinantsHard
A =−124−3b =10−2

Solve the system −x + 2y = 10 and 4x − 3y = −2. Find x.

−x + 2y = 104x − 3y = −2
x =
13.Vectors: dot & cross productMedium
xyzab

Find the angle θ between the vectors a = (6, 2, 1) and b = (−4, 4, 2), in degrees.

a = (6, 2, 1)b = (−4, 4, 2)
θ = °
14.Vectors: dot & cross productHard
xyzrFOA

A force F = (−40, 30, 60) N acts at point A(−3, −1, 2). Coordinates are in metres. Find the z-component Mz of the moment of the force about point O(1, −1, −1).

F = (−40, 30, 60) NA(−3, −1, 2) mO(1, −1, −1) m
Mz = N·m
15.ProbabilityMedium
xp(x)00.320.1540.260.35μ = 3.2

For the distribution shown, find the standard deviation σ of X.

x: 0, 2, 4, 6p(x): 0.3, 0.15, 0.2, 0.35
σ =
16.ProbabilityHard
€p(x)−30.8830.1270.02

A game costs €3 to play. You win €6 with probability 0.1 and €30 with probability 0.02; otherwise you win nothing. The stake is not returned. Find the expected net gain E(G) per game.

stake = €3€6: p = 0.1€30: p = 0.02
E(G) = €
17.Descriptive statisticsMedium
20253035404550

Find the sample standard deviation s of the data: 54, 20, 52, 27, 26.

n = 5
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 60 and standard deviation 12. What proportion P of values is above 42?

μ = 60σ = 12x = 42
P =
19.Normal distributionMedium
−3−2−10123zshaded area to the right of z = 0.9192

Drag z so that the shaded area under the standard normal curve, to the right of z, is 0.9192. Find z to two decimals.

A = 0.9192
z =
20.Normal distributionHard
35455565758595pointstop 75%

The exam scores are normally distributed with mean 65 points and standard deviation 10 points. Drag the cut-off so the shaded top 75% is to the right of it. Find the cut-off x.

μ = 65 pointsσ = 10 points75%
x = points

3Solutions

1.Limits

Answer: L = 6

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Divide by the highest power

(6 + (−2)/x + 9/x2)/(1 + 3/x + 6/x2)

Let x → ∞

L = 6/1 = 6

Answer

L = 6

For equal degrees the limit is the ratio of the leading coefficients.

2.Limits

Answer: L = 0.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

2·sin 2x/(8x) → 0/0

Second application

4·cos 2x/8

Substitute x = 0

L = 4/8 = 0.5

Answer

L = 0.5
3.Derivatives

Answer: f′(0.5) = 1.104

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Product and chain rule

f′(x) = sin(3x) + 3x·cos(3x)

Substitute

f′(0.5) = 0.9975 + 1.5·0.07074 = 1.104

Answer

f′(0.5) = 1.104
4.Derivatives

Answer: b = −14

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(3) = 28
f′(x) = 4x + 2 → f′(3) = 14

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 28 − 14·3 = −14

Answer

b = −14
5.Integrals

Answer: I = 0.6321

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = e−x/(−1)

Evaluate at the limits

I = (e−1 − 1)/(−1) = (0.3679 − 1)/(−1) = 0.6321

Answer

I = 0.6321
6.Integrals

Answer: A = 36

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

9 − x² = 0 → x = ±3

Integrate

A = [9x − x³/3]−33 = 18 − (−18) = 36

Answer

A = 36
7.Complex numbers

Answer: Re(w) = −0.6946

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus and argument of w

|w| = 2 · 2 = 4
θ = 150° + (−50)° = 100°

Rectangular form

Re(w) = 4·cos(100°) = −0.6946
Im(w) = 4·sin(100°) = 3.939
Re(w) = −0.6946

Answer

Re(w) = −0.6946
8.Complex numbers

Answer: C (3∠45°)

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus and arguments of the roots

|z| = 3
θ = −15°, 45°, 105°, 165°, −135°, −75°

The point

C = 3∠45°

Answer

C (3∠45°)
9.Differential equations

Answer: y(1.5) = 0.7801

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Characteristic roots

(r + 1)(r + 5) = 0 → r = −1, −5

Constants from the initial values

A + B = 2, −1A − 5B = 4
A = 3.5, B = −1.5

Evaluate

y(1.5) = 3.5·e−1.5 + (−1.5)·e−7.5 = 0.7801

Answer

y(1.5) = 0.7801
10.Differential equations

Answer: y(1.5) = 0.369

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e0.5t
(e0.5ty)′ = 2e−2.5t

General solution

y = 2/(−2.5)·e−3t + C·e−0.5t = −0.8·e−3t + C·e−0.5t

Initial condition

0 = −0.8 + C → C = 0.8

Evaluate

y(1.5) = −0.8·0.01111 + 0.8·0.4724 = 0.369

Answer

y(1.5) = 0.369
11.Matrices & determinants

Answer: c21 = −9

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c21 = 6·0 + (−3)·3 = −9

Answer

c21 = −9
12.Matrices & determinants

Answer: x = 5.2

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = (−1)·(−3) − 2·4 = −5

Replace the x column

det Aₓ = 10·(−3) − 2·(−2) = −26
x = −26/(−5) = 5.2

Answer

x = 5.2
y = 7.6
13.Vectors: dot & cross product

Answer: θ = 111.4 °

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product

a·b = 6·(−4) + 2·4 + 1·2 = −14

Magnitudes

|a| = √(6² + 2² + 1²) = 6.403
|b| = √((−4)² + 4² + 2²) = 6

Angle

cos θ = −14/(6.403·6) = −0.3644
θ = arccos(−0.3644) = 111.4°

Answer

θ = 111.4°
14.Vectors: dot & cross product

Answer: Mz = −120 N·m

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Position vector from O to A

r = A − O = (−3, −1, 2) − (1, −1, −1) = (−4, 0, 3) m

Moment M = r × F

(r × F)x = ryFz − rzFy = 0·60 − 3·30 = −90 N·m
(r × F)y = rzFx − rxFz = 3·(−40) − (−4)·60 = 120 N·m
(r × F)z = rxFy − ryFx = (−4)·30 − 0·(−40) = −120 N·m

Requested component

Mz = −120 N·m

Answer

Mz = −120 N·m
15.Probability

Answer: σ = 2.482

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 0·0.3 + 2·0.15 + 4·0.2 + 6·0.35 = 3.2

Mean of the squares

E(X²) = 0·0.3 + 4·0.15 + 16·0.2 + 36·0.35 = 16.4

Variance

Var(X) = 16.4 − 3.2² = 6.16
σ = √6.16 = 2.482

Answer

σ = 2.482
16.Probability

Answer: E(G) = −1.8 €

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Net outcomes

G: 3 (p = 0.1), 27 (p = 0.02), −3 (p = 0.88)

Expected value

E(G) = 3·0.1 + 27·0.02 − 3·0.88 = −1.8 €

Answer

E(G) = −1.8 €

A negative value means you lose money on average.

17.Descriptive statistics

Answer: s = 15.94

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 179/5 = 35.8

Squared deviations

Σ(x − x̄)² = 18.2² + (−15.8)² + 16.2² + (−8.8)² + (−9.8)² = 1017

Standard deviation

s = √(1017/4) = 15.94

Answer

s = 15.94
18.Descriptive statistics

Answer: P = 0.9332

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −1.5

Standard normal table

Φ(−1.5) = 0.06681
P = 1 − 0.06681 = 0.9332

Answer

P = 0.9332
19.Normal distribution

Answer: z = −1.4

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left of z

Φ(z) = 1 − 0.9192 = 0.0808

Read the z-table backwards

Find 0.0808 inside the table and read off z.

z = −1.40

Answer

z = −1.40
20.Normal distribution

Answer: x = 58.3 points

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.25

z from the table

z ≈ −0.67

Back to the original units

x = 65 − 0.67·10 = 58.3 points

Answer

x = 58.3 points

ExamProblems · examproblems.com/courses/engineering-mathematics