Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (−6x2 + 5x − 1)/(4x2 + 6x + 4).

f(x) = (−6x2 + 5x − 1)/(4x2 + 6x + 4)x → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 2x)/(x²), with x in radians.

f(x) = (1 − cos 2x)/(x²)x → 0
L =
3.DerivativesMedium
xyx = 0

Let f(x) = (−2x − 3)4. Find f′(0).

f(x) = (−2x − 3)4x = 0
f′(0) =
4.DerivativesHard
xyx = −2

The tangent line to f(x) = 3x2 − 6 at x = −2 crosses the y-axis at y = b. Find b.

f(x) = 3x2 − 6x = −2
b =
5.IntegralsMedium
xy02

Evaluate I = ∫02 e−x dx.

f(x) = e−x[0, 2]
I =
6.IntegralsHard
xyy = 0.5x2​y = x

Find the area A of the region enclosed by y = 0.5x2 and y = x.

y = 0.5x2y = x
A =
7.Complex numbersMedium
ReIm22−2−244−4−4θz

The number z = 5·ej0.8 has its angle in radians. Find its imaginary part b.

r = 5θ = 0.8 rad
b =
8.Complex numbersHard
ReIm11−1−122−2−233−3−3z₁z₂

The equation z² + 6z + 18 = 0 has two complex roots. Find their modulus |z|.

p = 6q = 18
|z| =
9.Differential equationsMedium
t (min)T (°C)20Ta​35 °C

A cup of coffee at 83 °C is left in a room at 23 °C. After 20 min its temperature is 35 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 83 °CTa = 23 °CT(20) = 35 °C
k = min⁻¹
10.Differential equationsHard
t (min)m (kg)t = ?4 kg

A tank holds 200 L of pure water. Brine with 0.05 kg of salt per litre flows in at 10 L/min, and the well-mixed solution flows out at the same rate. After how many minutes t does the tank contain 4 kg of salt?

V = 200 Lm0 = 0 kgc = 0.05 kg/Lr = 10 L/min
t = min
11.Matrices & determinantsMedium
A =1−353−4−1−145

Find the determinant det A of the 3×3 matrix A shown.

A = [1 −3 5; 3 −4 −1; −1 4 5]
det A =
12.Matrices & determinantsHard
A =1441

Find the larger eigenvalue λ of the matrix A shown.

A = [1 4; 4 1]
λ =
13.Vectors: dot & cross productMedium
xyzab

Find the value of k for which the vectors a = (−2, −4, 5) and b = (−2, k, 1) are perpendicular.

a = (−2, −4, 5)b = (−2, k, 1)
k =
14.Vectors: dot & cross productHard
xyzrFOA

A force F = (−40, 10, 10) N acts at point A(4, 0, 2). Coordinates are in metres. Find the z-component Mz of the moment of the force about point O(−1, −2, −3).

F = (−40, 10, 10) NA(4, 0, 2) mO(−1, −2, −3) m
Mz = N·m
15.ProbabilityMedium
xp(x)00.3520.3540.0560.25μ = 2.4

For the distribution shown, find the variance Var(X) of X.

x: 0, 2, 4, 6p(x): 0.35, 0.35, 0.05, 0.25
Var(X) =
16.ProbabilityHard
n = 6, p = 0.7: P(X ≤ 1) = ?k0123456

6 components are tested, and each one fails with probability 0.7, independently. What is the probability P that at most one fails?

n = 6p = 0.7
P =
17.Descriptive statisticsMedium
25303540455055

Find the sample standard deviation s of the data: 58, 21, 58, 27, 42.

n = 5
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 50 and standard deviation 15. What proportion P of values is above 35?

μ = 50σ = 15x = 35
P =
19.Normal distributionMedium
105 s117.8 sX + Y?

X is normal with mean 60 s and standard deviation 5 s; Y is independent and normal with mean 45 s and standard deviation 4 s. Find the probability P that X + Y is more than 117.8 s. Round z to two decimals.

μX = 60, σX = 5μY = 45, σY = 4X + Y > 117.8 s
P =
20.Normal distributionHard
μ = 250x = ?95%

The bag weights are normally distributed with mean 250 g and standard deviation 5 g. Find the value x below which 95% of them lie (the 95th percentile).

μ = 250σ = 5P = 95%
x = g

3Solutions

1.Limits

Answer: L = −1.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Divide by the highest power

(−6 + 5/x + (−1)/x2)/(4 + 6/x + 4/x2)

Let x → ∞

L = −6/4 = −1.5

Answer

L = −1.5

For equal degrees the limit is the ratio of the leading coefficients.

2.Limits

Answer: L = 2

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

2·sin 2x/(2x) → 0/0

Second application

4·cos 2x/2

Substitute x = 0

L = 4/2 = 2

Answer

L = 2
3.Derivatives

Answer: f′(0) = 216

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule

f′(x) = 4·(−2x − 3)3·(−2)

Substitute

f′(0) = 4·(−3)3·(−2) = 216

Answer

f′(0) = 216
4.Derivatives

Answer: b = −18

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(−2) = 6
f′(x) = 6x → f′(−2) = −12

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 6 − (−12)·(−2) = −18

Answer

b = −18
5.Integrals

Answer: I = 0.8647

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = e−x/(−1)

Evaluate at the limits

I = (e−2 − 1)/(−1) = (0.1353 − 1)/(−1) = 0.8647

Answer

I = 0.8647
6.Integrals

Answer: A = 0.6667

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

0.5x2 = x → x = 0, x = 2

Integrate upper minus lower

A = [0.5x2 − 0.1667x3]02 = 0.6667

Answer

A = 0.6667
7.Complex numbers

Answer: b = 3.587

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Euler's formula

z = 5·(cos 0.8 + j sin 0.8)

Components (radians)

a = 5·cos 0.8 = 3.484
b = 5·sin 0.8 = 3.587
b = 3.587

Answer

b = 3.587
8.Complex numbers

Answer: |z| = 4.243

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Discriminant

p² − 4q = 36 − 72 = −36 < 0

Quadratic formula

z = (−6 ± j√36)/2 = −3 + j3, −3 − j3

Answer

|z| = √((−3)² + 3²) = √18 = 4.243

Answer

|z| = 4.243
9.Differential equations

Answer: k = 0.08047 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−20k = 12/60

Solve for k

k = ln(60/12)/20 = 0.08047 min⁻¹

Answer

k = 0.08047 min⁻¹
10.Differential equations

Answer: t = 10.22 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Result

m(t) = 10 + (−10)·e−t/20

Solve for t

e−t/20 = (10 − 4)/(10 − 0) = 0.6
t = 20·ln(1.667) = 10.22 min

Answer

t = 10.22 min
11.Matrices & determinants

Answer: det A = 66

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −16, M₁₂ = 14, M₁₃ = 8

Cofactor expansion

det A = 1·(−16) − (−3)·14 + 5·8 = 66

Answer

det A = 66
12.Matrices & determinants

Answer: λ = 5

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (2)λ + (−15) = 0

Solve

λ = (2 ± √(64))/2 → λ = −3, 5
λ = 5

Answer

λ = 5
13.Vectors: dot & cross product

Answer: k = 2.25

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product equals zero

a·b = (−2)·(−2) + (−4)·k + 5·1 = 0
9 + (−4)·k = 0

Solve for k

k = −9/(−4) = 2.25

Answer

k = 2.25
14.Vectors: dot & cross product

Answer: Mz = 130 N·m

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Position vector from O to A

r = A − O = (4, 0, 2) − (−1, −2, −3) = (5, 2, 5) m

Moment M = r × F

(r × F)x = ryFz − rzFy = 2·10 − 5·10 = −30 N·m
(r × F)y = rzFx − rxFz = 5·(−40) − 5·10 = −250 N·m
(r × F)z = rxFy − ryFx = 5·10 − 2·(−40) = 130 N·m

Requested component

Mz = 130 N·m

Answer

Mz = 130 N·m
15.Probability

Answer: Var(X) = 5.44

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 0·0.35 + 2·0.35 + 4·0.05 + 6·0.25 = 2.4

Mean of the squares

E(X²) = 0·0.35 + 4·0.35 + 16·0.05 + 36·0.25 = 11.2

Variance

Var(X) = 11.2 − 2.4² = 5.44

Answer

Var(X) = 5.44
16.Probability

Answer: P = 0.01094

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Zero and one failure

P(X = 0) = 0.36 = 0.000729
P(X = 1) = 6·0.7·0.35 = 0.01021

Add them

P = 0.000729 + 0.01021 = 0.01094

Answer

P = 0.01094
17.Descriptive statistics

Answer: s = 17.14

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 206/5 = 41.2

Squared deviations

Σ(x − x̄)² = 16.8² + (−20.2)² + 16.8² + (−14.2)² + 0.8² = 1175

Standard deviation

s = √(1175/4) = 17.14

Answer

s = 17.14
18.Descriptive statistics

Answer: P = 0.8413

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −1

Standard normal table

Φ(−1) = 0.1587
P = 1 − 0.1587 = 0.8413

Answer

P = 0.8413
19.Normal distribution

Answer: P = 0.02275

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the sum

μ = 105 s, σ = √(5² + 4²) = 6.403 s

Standardise

z = (117.8 − 105)/6.403 = 2

Upper tail

P = 1 − Φ(2) = 1 − 0.9772 = 0.02275

Answer

P = 0.02275
20.Normal distribution

Answer: x = 258.2 g

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z for the percentile

Φ(z) = 0.95 → z = 1.645

Back to x

x = 250 + 1.645·5 = 258.22 g

Answer

x = 258.22 g

ExamProblems · examproblems.com/courses/engineering-mathematics