Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (1 + 2/x)3x. Give a decimal value.

f(x) = (1 + 2/x)3xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (1 − cos 5x)/(x²), with x in radians.

f(x) = (1 − cos 5x)/(x²)x → 0
L =
3.DerivativesMedium
xyx = 1

Let f(x) = (2x − 3)3. Find f′(1).

f(x) = (2x − 3)3x = 1
f′(1) =
4.DerivativesHard
xy

Let f(x) = x3 − 10.5x2 + 30x + 1. Find the x-coordinate x of the local minimum.

f(x) = x3 − 10.5x2 + 30x + 1
x =
5.IntegralsMedium
xy02

Evaluate I = ∫02 2x·(x² + 1)2 dx.

f(x) = 2x·(x² + 1)2[0, 2]
I =
6.IntegralsHard
xy−33

Find the area A of the region between the parabola y = 9 − x² and the x-axis.

y = 9 − x²
A =
7.Complex numbersMedium
ReIm55−5−51010−10−10θz

Write z = 10∠25° in rectangular form a + jb and give the real part a.

r = 10θ = 25°
a =
8.Complex numbersHard
ReIm11−1−122−2−233−3−3ABCD

Exactly one of the points A–D is a root of z⁶ = 729∠90°. Click it.

w = 729∠90°n = 6
  1. 1A (3∠135°)
  2. 2B (1.5∠135°)
  3. 3C (3∠165°)
  4. 4D (3∠−135°)
9.Differential equationsMedium
t (min)T (°C)17Ta​T = ?

A can of soda at 5 °C is taken out of the fridge into a room at 29 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.08 min⁻¹, find its temperature T after 17 min.

T0 = 5 °CTa = 29 °Ck = 0.08 min⁻¹t = 17 min
T = °C
10.Differential equationsHard
t (min)m (kg)80 minm = ?

A tank holds 100 L of pure water. Brine with 0.25 kg of salt per litre flows in at 2 L/min, and the well-mixed solution flows out at the same rate. How much salt m is in the tank after 80 min?

V = 100 Lm0 = 0 kgc = 0.25 kg/Lr = 2 L/min
m = kg
11.Matrices & determinantsMedium
A =5−13−3B =6−233

Let C = AB for the matrices shown. Find the entry c22 (row 2, column 2).

A = [5 −1; 3 −3]B = [6 −2; 3 3]
c22 =
12.Matrices & determinantsHard
A =−1414b =−103

Solve the system −x + 4y = −10 and x + 4y = 3. Find x.

−x + 4y = −10x + 4y = 3
x =
13.Vectors: dot & cross productMedium
xyzab

Find the angle θ between the vectors a = (2, −6, 6) and b = (5, −5, 4), in degrees.

a = (2, −6, 6)b = (5, −5, 4)
θ = °
14.Vectors: dot & cross productHard
xyzrFOA

A force F = (−30, −30, −60) N acts at point A(2, 0, 2). Coordinates are in metres. Find the magnitude |M| of the moment of the force about the origin O(0, 0, 0).

F = (−30, −30, −60) NA(2, 0, 2) mO(0, 0, 0) m
|M| = N·m
15.ProbabilityMedium
xp(x)00.3510.3520.3μ = 0.95

For the distribution shown, find the standard deviation σ of X.

x: 0, 1, 2p(x): 0.35, 0.35, 0.3
σ =
16.ProbabilityHard
n = 6, p = 0.5: P(X ≤ 1) = ?k0123456

6 components are tested, and each one fails with probability 0.5, independently. What is the probability P that at most one fails?

n = 6p = 0.5
P =
17.Descriptive statisticsMedium
15202530354045505560

Find the sample standard deviation s of the data: 60, 16, 12, 26, 29, 18.

n = 6
s =
18.Descriptive statisticsHard
z −2−1012

Exam scores are normally distributed with mean 170 and standard deviation 12. Find the z-score z of a score of 152.

μ = 170σ = 12x = 152
z =
19.Normal distributionMedium
25.135P = ?

The delivery times are normally distributed with mean 32 min and standard deviation 6 min. What fraction lies between 25.1 and 35 min? Give P as a decimal.

μ = 32σ = 6x1 = 25.1x2 = 35
P =
20.Normal distributionHard
μ = 250x = ?99%

The bag weights are normally distributed with mean 250 g and standard deviation 5 g. Find the value x below which 99% of them lie (the 99th percentile).

μ = 250σ = 5P = 99%
x = g

3Solutions

1.Limits

Answer: L = 403.4

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Take the logarithm

ln L = limx→∞ 3·x·ln(1 + 2/x)

Evaluate

ln(1 + u)/u → 1 as u → 0, so x·ln(1 + a/x) → a.

ln L = 3·2 = 6

Undo the logarithm

L = e6 = 403.4

Answer

L = 403.4
2.Limits

Answer: L = 12.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

5·sin 5x/(2x) → 0/0

Second application

25·cos 5x/2

Substitute x = 0

L = 25/2 = 12.5

Answer

L = 12.5
3.Derivatives

Answer: f′(1) = 6

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule

f′(x) = 3·(2x − 3)2·2

Substitute

f′(1) = 3·(−1)2·2 = 6

Answer

f′(1) = 6
4.Derivatives

Answer: x = 5

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Derivative

f′(x) = 3x2 − 21x + 30 = 3·(x2 − 7x + 10)

Solve f′(x) = 0

x = 2 or x = 5

Which one is which

f″(x) = 6x − 21: negative at a maximum, positive at a minimum.

f″(2) = −9, f″(5) = 9
x = 5

Answer

x = 5
5.Integrals

Answer: I = 41.33

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Substitution

u = x² + 1, du = 2x dx
I = ∫15 u2 du

Integrate and evaluate

I = [u3/3]15 = (125 − 1)/3 = 41.33

Answer

I = 41.33
6.Integrals

Answer: A = 36

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Zeros

9 − x² = 0 → x = ±3

Integrate

A = [9x − x³/3]−33 = 18 − (−18) = 36

Answer

A = 36
7.Complex numbers

Answer: a = 9.063

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Components

a = 10·cos(25°) = 9.063
b = 10·sin(25°) = 4.226

Rectangular form

z = 9.063 + j4.226
a = 9.063

Answer

a = 9.063
8.Complex numbers

Answer: A (3∠135°)

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus and arguments of the roots

|z| = 3
θ = 15°, 75°, 135°, −165°, −105°, −45°

The point

A = 3∠135°

Answer

A (3∠135°)
9.Differential equations

Answer: T = 22.84 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 29 + (−24)·e−0.08t

Substitute t

T(17) = 29 + (−24)·0.2567 = 22.84 °C

Answer

T = 22.84 °C
10.Differential equations

Answer: m = 19.95 kg

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Set up the equation

dm/dt = 2·0.25 − (2/100)·m = 0.5 − 0.02·m

Solve

The integrating factor is ert/V; the solution approaches the equilibrium c·V.

m(t) = 25 + (−25)·e−t/50

Substitute t

m(80) = 25 + (−25)·0.2019 = 19.95 kg

Answer

m = 19.95 kg
11.Matrices & determinants

Answer: c22 = −15

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c22 = 3·(−2) + (−3)·3 = −15

Answer

c22 = −15
12.Matrices & determinants

Answer: x = 6.5

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = (−1)·4 − 4·1 = −8

Replace the x column

det Aₓ = (−10)·4 − 4·3 = −52
x = −52/(−8) = 6.5

Answer

x = 6.5
y = −0.875
13.Vectors: dot & cross product

Answer: θ = 25.36 °

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product

a·b = 2·5 + (−6)·(−5) + 6·4 = 64

Magnitudes

|a| = √(2² + (−6)² + 6²) = 8.718
|b| = √(5² + (−5)² + 4²) = 8.124

Angle

cos θ = 64/(8.718·8.124) = 0.9037
θ = arccos(0.9037) = 25.36°

Answer

θ = 25.36°
14.Vectors: dot & cross product

Answer: |M| = 103.9 N·m

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Position vector from O to A

r = A − O = (2, 0, 2) − (0, 0, 0) = (2, 0, 2) m

Moment M = r × F

(r × F)x = ryFz − rzFy = 0·(−60) − 2·(−30) = 60 N·m
(r × F)y = rzFx − rxFz = 2·(−30) − 2·(−60) = 60 N·m
(r × F)z = rxFy − ryFx = 2·(−30) − 0·(−30) = −60 N·m

Magnitude

|M| = √(60² + 60² + (−60)²) = 103.9 N·m

Answer

|M| = 103.9 N·m
15.Probability

Answer: σ = 0.8047

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 0·0.35 + 1·0.35 + 2·0.3 = 0.95

Mean of the squares

E(X²) = 0·0.35 + 1·0.35 + 4·0.3 = 1.55

Variance

Var(X) = 1.55 − 0.95² = 0.6475
σ = √0.6475 = 0.8047

Answer

σ = 0.8047
16.Probability

Answer: P = 0.1094

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Zero and one failure

P(X = 0) = 0.56 = 0.01563
P(X = 1) = 6·0.5·0.55 = 0.09375

Add them

P = 0.01563 + 0.09375 = 0.1094

Answer

P = 0.1094
17.Descriptive statistics

Answer: s = 17.44

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 161/6 = 26.83

Squared deviations

Σ(x − x̄)² = 33.17² + (−10.83)² + (−14.83)² + (−0.8333)² + 2.167² + (−8.833)² = 1521

Standard deviation

s = √(1521/5) = 17.44

Answer

s = 17.44
18.Descriptive statistics

Answer: z = −1.5

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = (152 − 170)/12 = −1.5

Answer

z = −1.5
19.Normal distribution

Answer: P = 0.5664

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (25.1 − 32)/6 = −1.15
z₂ = (35 − 32)/6 = 0.5

Area between

P = Φ(0.5) − Φ(−1.15) = 0.6915 − 0.1251 = 0.5664

Answer

P = 0.5664
20.Normal distribution

Answer: x = 261.6 g

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z for the percentile

Φ(z) = 0.99 → z = 2.326

Back to x

x = 250 + 2.326·5 = 261.63 g

Answer

x = 261.63 g

ExamProblems · examproblems.com/courses/engineering-mathematics