Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Vectors: dot & cross product
Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|
Method
Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.
Probability
Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Normal distribution
z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ
Method
Convert the value to a z-score: z = (x − μ)/σ.
Look up Φ(z), the area to the left of z.
For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
For a percentile, work backwards: find z for the area, then x = μ + z·σ.
2Practice problems
1.LimitsMedium
Find the limit L = limx→∞ (1 + 2/x)3x. Give a decimal value.
f(x) = (1 + 2/x)3xx → ∞
L =
2.LimitsHard
Find the limit L = limx→0 (e0.5x − 1 − 0.5x)/x².
f(x) = (e0.5x − 1 − 0.5x)/x²x → 0
L =
3.DerivativesMedium
Let f(x) = ln(3x2 + 1). Find f′(1).
f(x) = ln(3x2 + 1)x = 1
f′(1) =
4.DerivativesHard
The tangent line to f(x) = 2x2 − 4x − 6 at x = 2 crosses the y-axis at y = b. Find b.
f(x) = 2x2 − 4x − 6x = 2
b =
5.IntegralsMedium
The region under y = 2x from x = 0 to x = 1 is rotated about the x-axis. Find the volume V of the solid (a cone).
y = 2x0 ≤ x ≤ 1
V =
6.IntegralsHard
Find the area A of the region between the parabola y = 1 − x² and the x-axis.
y = 1 − x²
A =
7.Complex numbersMedium
Find the argument θ of z = −6 + j8 in degrees, as the principal value between −180° and 180°.
z = −6 + j8
θ = °
8.Complex numbersHard
The roots of zⁿ = w with n = 3 and w = 64∠180° are zk = R1/n∠((φ + 360°·k)/n), k = 0, 1, 2. Find the argument of z₂ in degrees, between −180° and 180°.
w = 64∠180°n = 3k = 2
θ₂ = °
9.Differential equationsMedium
Solve y″ + 6y′ + 8y = 0 with y(0) = 3 and y′(0) = 4. Find y(0.5).
y″ + 6y′ + 8y = 0y(0) = 3y′(0) = 4
y(0.5) =
10.Differential equationsHard
Solve the initial value problem y′ + y/x = 4 for x > 0, with y(1) = −1. Find y(3).
y′ + y/x = 4y(1) = −1
y(3) =
11.Matrices & determinantsMedium
Find the determinant det A of the 3×3 matrix A shown.
A = [−5 5 −1; 0 3 3; −2 −3 −1]
det A =
12.Matrices & determinantsHard
Solve the system −2x − 3y = −8 and −6x − y = −8. Find x.
−2x − 3y = −8−6x − y = −8
x =
13.Vectors: dot & cross productMedium
Find the value of k for which the vectors a = (−1, −1, −3) and b = (k, 2, −5) are perpendicular.
a = (−1, −1, −3)b = (k, 2, −5)
k =
14.Vectors: dot & cross productHard
Find the area A of the triangle with corners A(2, −4, 4), B(4, −1, −4) and C(−3, 4, −1). Coordinates are in metres.
A(2, −4, 4)B(4, −1, −4)C(−3, 4, −1)
A = m²
15.ProbabilityMedium
In how many ways N can a committee of 3 people be chosen from a group of 9? The order does not matter.
n = 9k = 3
N =
16.ProbabilityHard
A test has 9 multiple-choice questions. A student who guesses gets each one right with probability 0.6, independently. What is the probability P of exactly 2 correct answers?
n = 9p = 0.6k = 2
P =
17.Descriptive statisticsMedium
Find the sample standard deviation s of the data: 20, 39, 58, 39, 27.
n = 5
s =
18.Descriptive statisticsHard
A quantity is normally distributed with mean 50 and standard deviation 8. What proportion P of values is below 46?
μ = 50σ = 8x = 46
P =
19.Normal distributionMedium
The masses of boxes are independent and normal with mean 12 kg and standard deviation 0.8 kg. Find the probability P that the total mass of 4 of them exceeds 48.8 kg. Round z to two decimals.
μ = 12 kgσ = 0.8 kgn = 4> 48.8 kg
P =
20.Normal distributionHard
The mass X of a product from line 1 and Y from line 2 are independent and normal: X has mean 500 g and standard deviation 8 g, Y has mean 490 g and standard deviation 6 g. Find the probability P that X is greater than Y. Round z to two decimals.
μX = 500 g, σX = 8 gμY = 490 g, σY = 6 g
P =
3Solutions
1.Limits
Answer: L = 403.4
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
Take the logarithm
ln L = limx→∞ 3·x·ln(1 + 2/x)
Evaluate
ln(1 + u)/u → 1 as u → 0, so x·ln(1 + a/x) → a.
ln L = 3·2 = 6
Undo the logarithm
L = e6 = 403.4
Answer
L = 403.4
2.Limits
Answer: L = 0.125
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
First application
(0.5·e0.5x − 0.5)/(2x) → 0/0
Second application
0.25·e0.5x/2
Substitute x = 0
L = 0.25·1/2 = 0.125
Answer
L = 0.125
3.Derivatives
Answer: f′(1) = 1.5
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Chain rule for the logarithm
f′(x) = 6x/(3x2 + 1)
Substitute
f′(1) = 6/4 = 1.5
Answer
f′(1) = 1.5
4.Derivatives
Answer: b = −14
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Point and slope
f(2) = −6
f′(x) = 4x − 4 → f′(2) = 4
Tangent line at x = 0
b = f(x₀) − f′(x₀)·x₀ = −6 − 4·2 = −14
Answer
b = −14
5.Integrals
Answer: V = 4.189
Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.
Disc method
V = π∫₀1 4x² dx
Integrate
V = π·4·1³/3 = 4.189
Answer
V = 4.189
Check: a cone of radius 2 and height 1 has (1/3)πr²h = 4.189.
6.Integrals
Answer: A = 1.333
Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.
Zeros
1 − x² = 0 → x = ±1
Integrate
A = [1x − x³/3]−11 = 0.6667 − (−0.6667) = 1.333
Answer
A = 1.333
7.Complex numbers
Answer: θ = 126.9 °
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Quadrant
a = −6, b = 8 → II
Reference angle
α = atan(8/6) = 53.13°
Argument
θ = 180° − α = 126.9°
Answer
θ = 126.9°
In polar form z = 10∠126.9°.
8.Complex numbers
Answer: θ₂ = −60 °
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
Modulus of the roots
641/3 = 4
Argument of the root
θ₂ = (180° + 360°·2)/3 = 300° → −60°
Argument
θ₂ = −60°
Answer
θ₂ = −60°
The 3 roots lie on the circle of radius 4, 120° apart.
9.Differential equations
Answer: y(0.5) = 2.266
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.
Characteristic roots
(r + 2)(r + 4) = 0 → r = −2, −4
Constants from the initial values
A + B = 3, −2A − 4B = 4
A = 8, B = −5
Evaluate
y(0.5) = 8·e−1 + (−5)·e−2 = 2.266
Answer
y(0.5) = 2.266
10.Differential equations
Answer: y(3) = 5
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Integrating factor
μ = e∫1/x dx = x1
Integrate
(x1y)′ = 4x → x1y = 4x2/2 + C
Initial condition
−1 = 4/2 + C → C = −3
Evaluate
y(3) = (4·32/2 + (−3))/31 = 5
Answer
y(3) = 5
11.Matrices & determinants
Answer: det A = −66
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
2×2 minors of the first row
M₁₁ = 6, M₁₂ = 6, M₁₃ = 6
Cofactor expansion
det A = (−5)·6 − 5·6 + (−1)·6 = −66
Answer
det A = −66
12.Matrices & determinants
Answer: x = 1
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Determinant of the coefficient matrix
det A = (−2)·(−1) − (−3)·(−6) = −16
Replace the x column
det Aₓ = (−8)·(−1) − (−3)·(−8) = −16
x = −16/(−16) = 1
Answer
x = 1
y = 2
13.Vectors: dot & cross product
Answer: k = 13
Dot product:a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.
Dot product equals zero
a·b = (−1)·k + (−1)·2 + (−3)·(−5) = 0
13 + (−1)·k = 0
Solve for k
k = −13/(−1) = 13
Answer
k = 13
14.Vectors: dot & cross product
Answer: A = 38.28 m²
Cross product:a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Combinations
C(9, 3) = (9·8·7)/(3·2·1) = 84
Answer
N = 84
16.Probability
Answer: P = 0.02123
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = −0.5
Standard normal table
Φ(−0.5) = 0.3085
P = 0.3085
Answer
P = 0.3085
19.Normal distribution
Answer: P = 0.3085
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).
Distribution of the total
μT = 48 kg, σT = 0.8·√4 = 1.6 kg
Standardise
z = (48.8 − 48)/1.6 = 0.5
Probability
P = 1 − Φ(0.5) = 0.3085
Answer
P = 0.3085
20.Normal distribution
Answer: P = 0.8413
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).