Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (1 − 1/x)3x. Give a decimal value.

f(x) = (1 − 1/x)3xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 ln(1 + 4x)/sin(3x), with x in radians.

f(x) = ln(1 + 4x)/sin(3x)x → 0
L =
3.DerivativesMedium
xyx = 0.5

Let f(x) = x·e−x. Find f′(0.5).

f(x) = x·e−xx = 0.5
f′(0.5) =
4.DerivativesHard
xy

Let f(x) = x3 + 4.5x2 + 6x − 6. Find the x-coordinate x of the local maximum.

f(x) = x3 + 4.5x2 + 6x − 6
x =
5.IntegralsMedium
xy28

Evaluate I = ∫28 2/x dx.

f(x) = 2/x[2, 8]
I =
6.IntegralsHard
xyy = 2x2​y = 2x

Find the area A of the region enclosed by y = 2x2 and y = 2x.

y = 2x2y = 2x
A =
7.Complex numbersMedium
ReIm55−5−51010−10−10θz

Write z = 12∠−130° in rectangular form a + jb and give the imaginary part b.

r = 12θ = −130°
b =
8.Complex numbersHard
ReIm11−1−122−2−2θz

Use De Moivre's theorem to find the imaginary part of z⁹ for z = −√3 + j.

z = −√3 + jn = 9
Im(z⁹) =
9.Differential equationsMedium
tyy(0) = 1y(1) = ?

Solve y″ + 7y′ + 12y = 0 with y(0) = 1 and y′(0) = 2. Find y(1).

y″ + 7y′ + 12y = 0y(0) = 1y′(0) = 2
y(1) =
10.Differential equationsHard
t (min)m (kg)t = ?175 kg

A tank holds 1000 L of pure water. Brine with 0.25 kg of salt per litre flows in at 4 L/min, and the well-mixed solution flows out at the same rate. After how many minutes t does the tank contain 175 kg of salt?

V = 1000 Lm0 = 0 kgc = 0.25 kg/Lr = 4 L/min
t = min
11.Matrices & determinantsMedium
A =−6−606B =2−42−6

Let C = AB for the matrices shown. Find the entry c22 (row 2, column 2).

A = [−6 −6; 0 6]B = [2 −4; 2 −6]
c22 =
12.Matrices & determinantsHard
A =−46−33b =4−6

Solve the system −4x + 6y = 4 and −3x + 3y = −6. Find x.

−4x + 6y = 4−3x + 3y = −6
x =
13.Vectors: dot & cross productMedium
xyzab

Find the scalar projection compb a of a = (−3, −7, −2) onto b = (1, 5, 4), that is, the component of a in the direction of b.

a = (−3, −7, −2)b = (1, 5, 4)
compb a =
14.Vectors: dot & cross productHard
xyzabc

Find the volume V of the parallelepiped whose edges from one corner are a = (1, −2, 1), b = (4, 5, 5) and c = (0, −1, −1).

a = (1, −2, 1)b = (4, 5, 5)c = (0, −1, −1)
V =
15.ProbabilityMedium
n = 7k = 2N = ?

In how many ways N can a committee of 2 people be chosen from a group of 7? The order does not matter.

n = 7k = 2
N =
16.ProbabilityHard
n = 5, p = 0.4: P(X = 1) = ?k012345

A test has 5 multiple-choice questions. A student who guesses gets each one right with probability 0.4, independently. What is the probability P of exactly 1 correct answers?

n = 5p = 0.4k = 1
P =
17.Descriptive statisticsMedium
1520253035404550

Find the sample standard deviation s of the data: 30, 32, 28, 54, 19, 43, 15.

n = 7
s =
18.Descriptive statisticsHard
z −2−1012

Exam scores are normally distributed with mean 100 and standard deviation 5. Find the z-score z of a score of 96.

μ = 100σ = 5x = 96
z =
19.Normal distributionMedium
88108.25P = ?

The IQ scores are normally distributed with mean 100 points and standard deviation 15 points. What fraction lies between 88 and 108.25 points? Give P as a decimal.

μ = 100σ = 15x1 = 88x2 = 108.25
P =
20.Normal distributionHard
μ = 500x = ?80%

The battery lifetimes are normally distributed with mean 500 h and standard deviation 40 h. Find the value x below which 80% of them lie (the 80th percentile).

μ = 500σ = 40P = 80%
x = h

3Solutions

1.Limits

Answer: L = 0.04979

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Take the logarithm

ln L = limx→∞ 3·x·ln(1 − 1/x)

Evaluate

ln(1 + u)/u → 1 as u → 0, so x·ln(1 + a/x) → a.

ln L = 3·(−1) = −3

Undo the logarithm

L = e−3 = 0.04979

Answer

L = 0.04979
2.Limits

Answer: L = 1.333

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

L'Hôpital's rule

L = limx→0 [4/(1 + 4x)]/[3·cos 3x]

Substitute x = 0

L = 4/3 = 1.333

Answer

L = 1.333
3.Derivatives

Answer: f′(0.5) = 0.3033

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Product rule

f′(x) = u′v + uv′ = e−x·(1 + (−1)·x)

Substitute

f′(0.5) = 0.6065·(1 + (−0.5)) = 0.3033

Answer

f′(0.5) = 0.3033
4.Derivatives

Answer: x = −2

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Derivative

f′(x) = 3x2 + 9x + 6 = 3·(x2 + 3x + 2)

Solve f′(x) = 0

x = −2 or x = −1

Which one is which

f″(x) = 6x + 9: negative at a maximum, positive at a minimum.

f″(−2) = −3, f″(−1) = 3
x = −2

Answer

x = −2
5.Integrals

Answer: I = 2.773

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Antiderivative

F(x) = 2·ln x

Evaluate at the limits

I = 2·(ln 8 − ln 2) = 2·ln 4 = 2.773

Answer

I = 2.773
6.Integrals

Answer: A = 0.3333

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Intersection points

2x2 = 2x → x = 0, x = 1

Integrate upper minus lower

A = [x2 − 0.6667x3]01 = 0.3333

Answer

A = 0.3333
7.Complex numbers

Answer: b = −9.193

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Components

a = 12·cos(−130°) = −7.713
b = 12·sin(−130°) = −9.193

Rectangular form

z = −7.713 − j9.193
b = −9.193

Answer

b = −9.193
8.Complex numbers

Answer: Im(z⁹) = −512

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Polar form

z = −√3 + j = 2∠150°

De Moivre

z⁹ = (2)⁹∠1350° = 512∠−90°

Rectangular form

z⁹ = 512·(cos −90° + j sin −90°) = −j512
Im(z⁹) = −512

Answer

Im(z⁹) = −512
9.Differential equations

Answer: y(1) = 0.2071

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Characteristic roots

(r + 3)(r + 4) = 0 → r = −3, −4

Constants from the initial values

A + B = 1, −3A − 4B = 2
A = 6, B = −5

Evaluate

y(1) = 6·e−3 + (−5)·e−4 = 0.2071

Answer

y(1) = 0.2071
10.Differential equations

Answer: t = 301 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Result

m(t) = 250 + (−250)·e−t/250

Solve for t

e−t/250 = (250 − 175)/(250 − 0) = 0.3
t = 250·ln(3.333) = 301 min

Answer

t = 301 min
11.Matrices & determinants

Answer: c22 = −36

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c22 = 0·(−4) + 6·(−6) = −36

Answer

c22 = −36
12.Matrices & determinants

Answer: x = 8

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = (−4)·3 − 6·(−3) = 6

Replace the x column

det Aₓ = 4·3 − 6·(−6) = 48
x = 48/6 = 8

Answer

x = 8
y = 6
13.Vectors: dot & cross product

Answer: compb a = −7.098

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product

a·b = (−3)·1 + (−7)·5 + (−2)·4 = −46

Length of b

|b| = √(1² + 5² + 4²) = 6.481

Scalar projection

compb a = a·b/|b| = −46/6.481 = −7.098

Answer

compb a = −7.098

Negative: a has a component pointing against b.

14.Vectors: dot & cross product

Answer: V = 12

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product b × c

(b × c)x = bycz − bzcy = 5·(−1) − 5·(−1) = 0
(b × c)y = bzcx − bxcz = 5·0 − 4·(−1) = 4
(b × c)z = bxcy − bycx = 4·(−1) − 5·0 = −4

Dot product with a

a·(b × c) = 1·0 + (−2)·4 + 1·(−4) = −12
V = |−12| = 12

Answer

V = 12
15.Probability

Answer: N = 21

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Combinations

C(7, 2) = (7·6)/(2·1) = 21

Answer

N = 21
16.Probability

Answer: P = 0.2592

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Binomial formula

P(X = 1) = 5·0.41·0.64 = 5·0.4·0.1296 = 0.2592

Answer

P = 0.2592
17.Descriptive statistics

Answer: s = 13.43

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 221/7 = 31.57

Squared deviations

Σ(x − x̄)² = (−1.571)² + 0.4286² + (−3.571)² + 22.43² + (−12.57)² + 11.43² + (−16.57)² = 1082

Standard deviation

s = √(1082/6) = 13.43

Answer

s = 13.43
18.Descriptive statistics

Answer: z = −0.8

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = (96 − 100)/5 = −0.8

Answer

z = −0.8
19.Normal distribution

Answer: P = 0.497

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (88 − 100)/15 = −0.8
z₂ = (108.25 − 100)/15 = 0.55

Area between

P = Φ(0.55) − Φ(−0.8) = 0.7088 − 0.2119 = 0.497

Answer

P = 0.497
20.Normal distribution

Answer: x = 533.7 h

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z for the percentile

Φ(z) = 0.8 → z = 0.8416

Back to x

x = 500 + 0.8416·40 = 533.66 h

Answer

x = 533.66 h

ExamProblems · examproblems.com/courses/engineering-mathematics