Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).
Differential equations
Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m
Matrices & determinants
2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)
Vectors: dot & cross product
Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|
Method
Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.
Probability
Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k
Descriptive statistics
Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ
Normal distribution
z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ
Method
Convert the value to a z-score: z = (x − μ)/σ.
Look up Φ(z), the area to the left of z.
For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
For a percentile, work backwards: find z for the area, then x = μ + z·σ.
2Practice problems
1.LimitsMedium
Find the limit L = limx→∞ (−4x2 − 5x + 3)/(5x2 + 6x + 7).
f(x) = (−4x2 − 5x + 3)/(5x2 + 6x + 7)x → ∞
L =
2.LimitsHard
Find the limit L = limx→0 (e0.5x − 1 − 0.5x)/x².
f(x) = (e0.5x − 1 − 0.5x)/x²x → 0
L =
3.DerivativesMedium
Let f(x) = ln(x2 + 4). Find f′(1).
f(x) = ln(x2 + 4)x = 1
f′(1) =
4.DerivativesHard
Let f(x) = x3 + 1.5x2 − 6x + 5. Find the x-coordinate x of the local maximum.
f(x) = x3 + 1.5x2 − 6x + 5
x =
5.IntegralsMedium
The region under y = √(4x) from x = 0 to x = 4 is rotated about the x-axis. Find the volume V of the solid (a paraboloid).
y = √(4x)0 ≤ x ≤ 4
V =
6.IntegralsHard
The region between the line y = 5x and the parabola y = 2x² is rotated about the x-axis. Find the volume V of the solid.
y = 5xy = 2x²
V =
7.Complex numbersMedium
Find the argument θ of z = 9 + j4 in degrees, as the principal value between −180° and 180°.
z = 9 + j4
θ = °
8.Complex numbersHard
The roots of zⁿ = w with n = 5 and w = 32∠−90° are zk = R1/n∠((φ + 360°·k)/n), k = 0, 1, …, 4. Find the real part of z₃.
w = 32∠−90°n = 5k = 3
Re(z₃) =
9.Differential equationsMedium
A forged steel part at 440 °C is left to cool in a workshop at 20 °C. After 20 min its temperature is 251 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). How long after the start, t, does it take to reach 136 °C?
T0 = 440 °CTa = 20 °CT(20) = 251 °CT = 136 °C
t = min
10.Differential equationsHard
A system obeys y″ + 2y′ + 26y = 130 for t ≥ 0, starting from rest: y(0) = 0, y′(0) = 0. Find y(1.5); angles in radians.
y″ + 2y′ + 26y = 130y(0) = 0y′(0) = 0
y(1.5) =
11.Matrices & determinantsMedium
Find the determinant det A of the 3×3 matrix A shown.
A = [−4 −4 −4; 5 −3 −3; 5 0 −1]
det A =
12.Matrices & determinantsHard
Solve the system 4x − 5y = −6 and 6x + 3y = −9. Find x.
4x − 5y = −66x + 3y = −9
x =
13.Vectors: dot & cross productMedium
Find the scalar projection compb a of a = (1, 2, 6) onto b = (2, 4, −6), that is, the component of a in the direction of b.
a = (1, 2, 6)b = (2, 4, −6)
compb a =
14.Vectors: dot & cross productHard
Find the volume V of the parallelepiped whose edges from one corner are a = (−3, 0, 3), b = (−2, −2, −5) and c = (−3, −2, −2).
a = (−3, 0, 3)b = (−2, −2, −5)c = (−3, −2, −2)
V =
15.ProbabilityMedium
In how many ways N can a committee of 5 people be chosen from a group of 13? The order does not matter.
n = 13k = 5
N =
16.ProbabilityHard
X has the distribution shown, and Y = −2X + 1. Find the standard deviation σY of Y.
Find the sample standard deviation s of the data: 34, 26, 21, 50, 19, 51, 20.
n = 7
s =
18.Descriptive statisticsHard
Exam scores are normally distributed with mean 50 and standard deviation 20. Find the z-score z of a score of 58.
μ = 50σ = 20x = 58
z =
19.Normal distributionMedium
Drag z so that the shaded area under the standard normal curve, to the right of z, is 0.6772. Find z to two decimals.
A = 0.6772
z =
20.Normal distributionHard
Hole diameters D are normal with mean 25.03 mm and standard deviation 0.01 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.01 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.
hole: μ = 25.03 mm, σ = 0.01 mmshaft: μ = 25 mm, σ = 0.01 mm
P =
3Solutions
1.Limits
Answer: L = −0.8
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
Divide by the highest power
(−4 + (−5)/x + 3/x2)/(5 + 6/x + 7/x2)
Let x → ∞
L = −4/5 = −0.8
Answer
L = −0.8
For equal degrees the limit is the ratio of the leading coefficients.
2.Limits
Answer: L = 0.125
Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).
First application
(0.5·e0.5x − 0.5)/(2x) → 0/0
Second application
0.25·e0.5x/2
Substitute x = 0
L = 0.25·1/2 = 0.125
Answer
L = 0.125
3.Derivatives
Answer: f′(1) = 0.4
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Chain rule for the logarithm
f′(x) = 2x/(x2 + 4)
Substitute
f′(1) = 2/5 = 0.4
Answer
f′(1) = 0.4
4.Derivatives
Answer: x = −2
Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.
Derivative
f′(x) = 3x2 + 3x − 6 = 3·(x2 + x − 2)
Solve f′(x) = 0
x = −2 or x = 1
Which one is which
f″(x) = 6x + 3: negative at a maximum, positive at a minimum.
f″(−2) = −9, f″(1) = 9
x = −2
Answer
x = −2
5.Integrals
Answer: V = 100.5
Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.
Disc method
V = π∫₀4 4x dx
Integrate
V = π·4·4²/2 = 100.5
Answer
V = 100.5
6.Integrals
Answer: V = 163.6
Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.
Intersection points
5x = 2x² → x = 0, x = 2.5
Washer method
V = π∫₀2.5 ((5x)² − (2x²)²) dx
Integrate
V = π(25·2.5³/3 − 4·2.5⁵/5) = π·52.08 = 163.6
Answer
V = 163.6
7.Complex numbers
Answer: θ = 23.96 °
Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.
Quadrant
a = 9, b = 4 → I
Reference angle
α = atan(4/9) = 23.96°
Argument
θ = α = 23.96°
Answer
θ = 23.96°
In polar form z = 9.849∠23.96°.
8.Complex numbers
Answer: Re(z₃) = −1.902
De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.
The 5 roots lie on the circle of radius 2, 72° apart.
9.Differential equations
Answer: t = 43.04 min
First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.
Cooling constant
k = ln(420/231)/20 = 0.02989 min⁻¹
Time to reach the target
t = ln(420/116)/0.02989 = 43.04 min
Answer
t = 43.04 min
10.Differential equations
Answer: y(1.5) = 4.404
Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
2×2 minors of the first row
M₁₁ = 3, M₁₂ = 10, M₁₃ = 15
Cofactor expansion
det A = (−4)·3 − (−4)·10 + (−4)·15 = −32
Answer
det A = −32
12.Matrices & determinants
Answer: x = −1.5
Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.
Determinant of the coefficient matrix
det A = 4·3 − (−5)·6 = 42
Replace the x column
det Aₓ = (−6)·3 − (−5)·(−9) = −63
x = −63/42 = −1.5
Answer
x = −1.5
y = 0
13.Vectors: dot & cross product
Answer: compb a = −3.474
Dot product:a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.
Dot product
a·b = 1·2 + 2·4 + 6·(−6) = −26
Length of b
|b| = √(2² + 4² + (−6)²) = 7.483
Scalar projection
compb a = a·b/|b| = −26/7.483 = −3.474
Answer
compb a = −3.474
Negative: a has a component pointing against b.
14.Vectors: dot & cross product
Answer: V = 12
Cross product:a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.
Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.
Combinations
C(13, 5) = (13·12·11·10·9)/(5·4·3·2·1) = 1287
Answer
N = 1287
16.Probability
Answer: σY = 3.219
Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.
Spread of X
μ = 1.9, Var(X) = 2.59, σX = 1.609
Linear change
σY = |−2|·1.609 = 3.219
Answer
σY = 3.219
The mean does move: E(Y) = −2·1.9 + 1 = −2.8.
17.Descriptive statistics
Answer: s = 13.89
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.
Standardise
z = (58 − 50)/20 = 0.4
Answer
z = 0.4
19.Normal distribution
Answer: z = −0.46
From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.
Area to the left of z
Φ(z) = 1 − 0.6772 = 0.3228
Read the z-table backwards
Find 0.3228 inside the table and read off z.
z = −0.46
Answer
z = −0.46
20.Normal distribution
Answer: P = 0.983
Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).