Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (5x2 + 5x − 7)/(4x2 + 5x + 6).

f(x) = (5x2 + 5x − 7)/(4x2 + 5x + 6)x → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (e0.5x − 1 − 0.5x)/x².

f(x) = (e0.5x − 1 − 0.5x)/x²x → 0
L =
3.DerivativesMedium
xyx = 1

Let f(x) = (2x + 3)4. Find f′(1).

f(x) = (2x + 3)4x = 1
f′(1) =
4.DerivativesHard
xyx = 3

The tangent line to f(x) = 0.5x2 + 1 at x = 3 crosses the y-axis at y = b. Find b.

f(x) = 0.5x2 + 1x = 3
b =
5.IntegralsMedium
xy2y = x·sin x

Evaluate I = ∫₀2 x·sin x dx (x in radians).

∫₀2 x·sin x dx
I =
6.IntegralsHard
xy0.5y = x²eˣ

Evaluate I = ∫₀0.5 x²·eˣ dx.

∫₀0.5 x²eˣ dx
I =
7.Complex numbersMedium
ReIm22−2−244−4−4θz

Find the argument θ of z = −5 + j in degrees, as the principal value between −180° and 180°.

z = −5 + j
θ = °
8.Complex numbersHard
ReIm11−1−122−2−233−3−3z₀z₁z₂z₃z₄

The roots of zⁿ = w with n = 5 and w = 243∠180° are zk = R1/n∠((φ + 360°·k)/n), k = 0, 1, …, 4. Find the real part of z₁.

w = 243∠180°n = 5k = 1
Re(z₁) =
9.Differential equationsMedium
t (min)T (°C)12Ta​T = ?

A can of soda at 6 °C is taken out of the fridge into a room at 25 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). With k = 0.09 min⁻¹, find its temperature T after 12 min.

T0 = 6 °CTa = 25 °Ck = 0.09 min⁻¹t = 12 min
T = °C
10.Differential equationsHard
xy13(1, 0)y(3) = ?

Solve the initial value problem y′ + y/x = x for x > 0, with y(1) = 0. Find y(3).

y′ + y/x = xy(1) = 0
y(3) =
11.Matrices & determinantsMedium
A =2044B =42−1−1

Let C = AB for the matrices shown. Find the entry c12 (row 1, column 2).

A = [2 0; 4 4]B = [4 2; −1 −1]
c12 =
12.Matrices & determinantsHard
A =6−662b =7−7

Solve the system 6x − 6y = 7 and 6x + 2y = −7. Find x.

6x − 6y = 76x + 2y = −7
x =
13.Vectors: dot & cross productMedium
xyzab

Find the scalar projection compb a of a = (−7, 0, −1) onto b = (−5, −6, −6), that is, the component of a in the direction of b.

a = (−7, 0, −1)b = (−5, −6, −6)
compb a =
14.Vectors: dot & cross productHard
xyzabc

Find the volume V of the parallelepiped whose edges from one corner are a = (3, 3, 1), b = (5, −4, −4) and c = (−3, 5, −5).

a = (3, 3, 1)b = (5, −4, −4)c = (−3, 5, −5)
V =
15.ProbabilityMedium
xp(x)10.2520.3530.1540.0550.2μ = 2.6

For the distribution shown, find the standard deviation σ of X.

x: 1, 2, 3, 4, 5p(x): 0.25, 0.35, 0.15, 0.05, 0.2
σ =
16.ProbabilityHard
xp(x)00.210.220.2530.240.15μ

X has the distribution shown, and Y = 2X + 1. Find the standard deviation σY of Y.

x: 0, 1, 2, 3, 4p(x): 0.2, 0.2, 0.25, 0.2, 0.15Y = 2X + 1
σY =
17.Descriptive statisticsMedium
2025303540455055

Find the sample standard deviation s of the data: 54, 17, 57, 50, 44, 50.

n = 6
s =
18.Descriptive statisticsHard
z −2−1012

Exam scores are normally distributed with mean 100 and standard deviation 5. Find the z-score z of a score of 102.

μ = 100σ = 5x = 102
z =
19.Normal distributionMedium
125 kg124.4 kgT = X₁ + … + X₅?

The masses of bags of cement are independent and normal with mean 25 kg and standard deviation 0.5 kg. Find the probability P that the total mass of 5 of them exceeds 124.4 kg. Round z to two decimals.

μ = 25 kgσ = 0.5 kgn = 5> 124.4 kg
P =
20.Normal distributionHard
35455565758595pointstop 20%

The exam scores are normally distributed with mean 65 points and standard deviation 10 points. Drag the cut-off so the shaded top 20% is to the right of it. Find the cut-off x.

μ = 65 pointsσ = 10 points20%
x = points

3Solutions

1.Limits

Answer: L = 1.25

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Divide by the highest power

(5 + 5/x + (−7)/x2)/(4 + 5/x + 6/x2)

Let x → ∞

L = 5/4 = 1.25

Answer

L = 1.25

For equal degrees the limit is the ratio of the leading coefficients.

2.Limits

Answer: L = 0.125

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

(0.5·e0.5x − 0.5)/(2x) → 0/0

Second application

0.25·e0.5x/2

Substitute x = 0

L = 0.25·1/2 = 0.125

Answer

L = 0.125
3.Derivatives

Answer: f′(1) = 1000

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule

f′(x) = 4·(2x + 3)3·2

Substitute

f′(1) = 4·53·2 = 1000

Answer

f′(1) = 1000
4.Derivatives

Answer: b = −3.5

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(3) = 5.5
f′(x) = x → f′(3) = 3

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 5.5 − 3·3 = −3.5

Answer

b = −3.5
5.Integrals

Answer: I = 1.742

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = sin x dx, v = −cos x

Antiderivative

∫x sin x dx = −x cos x + ∫cos x dx = −x cos x + sin x

Limits

(−2·cos 2 + sin 2) − (0 + 0) = 1.742

Answer

I = 1.742
6.Integrals

Answer: I = 0.0609

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

1.649·(1.25) − 1·2 = 0.0609

Answer

I = 0.0609
7.Complex numbers

Answer: θ = 168.7 °

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Quadrant

a = −5, b = 1 → II

Reference angle

α = atan(1/5) = 11.31°

Argument

θ = 180° − α = 168.7°

Answer

θ = 168.7°

In polar form z = 5.099∠168.7°.

8.Complex numbers

Answer: Re(z₁) = −0.9271

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus of the roots

2431/5 = 3

Argument of the root

θ₁ = (180° + 360°·1)/5 = 108°

Rectangular form

z₁ = 3·(cos 108° + j sin 108°) = −0.9271 + j2.853
Re(z₁) = −0.9271

Answer

Re(z₁) = −0.9271

The 5 roots lie on the circle of radius 3, 72° apart.

9.Differential equations

Answer: T = 18.55 °C

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Solution of the cooling law

T(t) = 25 + (−19)·e−0.09t

Substitute t

T(12) = 25 + (−19)·0.3396 = 18.55 °C

Answer

T = 18.55 °C
10.Differential equations

Answer: y(3) = 2.889

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e∫1/x dx = x1

Integrate

(x1y)′ = x2 → x1y = 1x3/3 + C

Initial condition

0 = 1/3 + C → C = −0.3333

Evaluate

y(3) = (1·33/3 + (−0.3333))/31 = 2.889

Answer

y(3) = 2.889
11.Matrices & determinants

Answer: c12 = 4

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c12 = 2·2 + 0·(−1) = 4

Answer

c12 = 4
12.Matrices & determinants

Answer: x = −0.5833

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = 6·2 − (−6)·6 = 48

Replace the x column

det Aₓ = 7·2 − (−6)·(−7) = −28
x = −28/48 = −0.5833

Answer

x = −0.5833
y = −1.75
13.Vectors: dot & cross product

Answer: compb a = 4.163

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product

a·b = (−7)·(−5) + 0·(−6) + (−1)·(−6) = 41

Length of b

|b| = √((−5)² + (−6)² + (−6)²) = 9.849

Scalar projection

compb a = a·b/|b| = 41/9.849 = 4.163

Answer

compb a = 4.163
14.Vectors: dot & cross product

Answer: V = 244

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product b × c

(b × c)x = bycz − bzcy = (−4)·(−5) − (−4)·5 = 40
(b × c)y = bzcx − bxcz = (−4)·(−3) − 5·(−5) = 37
(b × c)z = bxcy − bycx = 5·5 − (−4)·(−3) = 13

Dot product with a

a·(b × c) = 3·40 + 3·37 + 1·13 = 244
V = |244| = 244

Answer

V = 244
15.Probability

Answer: σ = 1.428

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 1·0.25 + 2·0.35 + 3·0.15 + 4·0.05 + 5·0.2 = 2.6

Mean of the squares

E(X²) = 1·0.25 + 4·0.35 + 9·0.15 + 16·0.05 + 25·0.2 = 8.8

Variance

Var(X) = 8.8 − 2.6² = 2.04
σ = √2.04 = 1.428

Answer

σ = 1.428
16.Probability

Answer: σY = 2.676

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Spread of X

μ = 1.9, Var(X) = 1.79, σX = 1.338

Linear change

σY = |2|·1.338 = 2.676

Answer

σY = 2.676

The mean does move: E(Y) = 2·1.9 + 1 = 4.8.

17.Descriptive statistics

Answer: s = 14.56

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 272/6 = 45.33

Squared deviations

Σ(x − x̄)² = 8.667² + (−28.33)² + 11.67² + 4.667² + (−1.333)² + 4.667² = 1059

Standard deviation

s = √(1059/5) = 14.56

Answer

s = 14.56
18.Descriptive statistics

Answer: z = 0.4

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = (102 − 100)/5 = 0.4

Answer

z = 0.4
19.Normal distribution

Answer: P = 0.7054

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the total

μT = 125 kg, σT = 0.5·√5 = 1.118 kg

Standardise

z = (124.4 − 125)/1.118 = −0.54

Probability

P = 1 − Φ(−0.54) = 0.7054

Answer

P = 0.7054
20.Normal distribution

Answer: x = 73.4 points

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.8

z from the table

z ≈ 0.84

Back to the original units

x = 65 + 0.84·10 = 73.4 points

Answer

x = 73.4 points

ExamProblems · examproblems.com/courses/engineering-mathematics