Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(x2 − 4x) − x).

f(x) = √(x2 − 4x) − xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 ln(1 + x)/sin(5x), with x in radians.

f(x) = ln(1 + x)/sin(5x)x → 0
L =
3.DerivativesMedium
xyx = 1

Let f(x) = ln(x2 + 1). Find f′(1).

f(x) = ln(x2 + 1)x = 1
f′(1) =
4.DerivativesHard
xyx = 1

The tangent line to f(x) = −x2 − 6 at x = 1 crosses the y-axis at y = b. Find b.

f(x) = −x2 − 6x = 1
b =
5.IntegralsMedium
xy2y = x·sin x

Evaluate I = ∫₀2 x·sin x dx (x in radians).

∫₀2 x·sin x dx
I =
6.IntegralsHard
xy1y = 3xy = 3x²

The region between the line y = 3x and the parabola y = 3x² is rotated about the x-axis. Find the volume V of the solid.

y = 3xy = 3x²
V =
7.Complex numbersMedium
ReIm11−1−122−2−233−3−3z₁z₂w

Given z₁ = 2∠30° and z₂ = 3∠−25°, find the real part of w = z₁/z₂.

z₁ = 2∠30°z₂ = 3∠−25°
Re(w) =
8.Complex numbersHard
ReIm11−1−122−2−233−3−3z₀z₁z₂

The roots of zⁿ = w with n = 3 and w = 27∠180° are zk = R1/n∠((φ + 360°·k)/n), k = 0, 1, 2. Find the real part of z₁.

w = 27∠180°n = 3k = 1
Re(z₁) =
9.Differential equationsMedium
t (min)T (°C)49Ta​114 °C298 °C

A forged steel part at 420 °C is left to cool in a workshop at 23 °C. After 49 min its temperature is 114 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). How long after the start, t, does it take to reach 298 °C?

T0 = 420 °CTa = 23 °CT(49) = 114 °CT = 298 °C
t = min
10.Differential equationsHard
ty1.5y(1.5) = ?

Solve y′ + 0.5y = 7e−t with y(0) = 2. Find y(1.5).

y′ + 0.5y = 7e−ty(0) = 2
y(1.5) =
11.Matrices & determinantsMedium
A =3530−4−34−24

Find the determinant det A of the 3×3 matrix A shown.

A = [3 5 3; 0 −4 −3; 4 −2 4]
det A =
12.Matrices & determinantsHard
A =25−3−2b =−58

Solve the system 2x + 5y = −5 and −3x − 2y = 8. Find x.

2x + 5y = −5−3x − 2y = 8
x =
13.Vectors: dot & cross productMedium
xyzab

Find the value of k for which the vectors a = (2, −2, −6) and b = (k, −4, 2) are perpendicular.

a = (2, −2, −6)b = (k, −4, 2)
k =
14.Vectors: dot & cross productHard
xyzab

For a = (3, 5, −3) and b = (4, −2, 3), find the x-component (a × b)x of the cross product a × b.

a = (3, 5, −3)b = (4, −2, 3)
(a × b)x =
15.ProbabilityMedium
xp(x)00.320.2540.360.15μ = 2.6

For the distribution shown, find the variance Var(X) of X.

x: 0, 2, 4, 6p(x): 0.3, 0.25, 0.3, 0.15
Var(X) =
16.ProbabilityHard
n = 11, p = 0.7: P(X = 3) = ?k01234567891011

A test has 11 multiple-choice questions. A student who guesses gets each one right with probability 0.7, independently. What is the probability P of exactly 3 correct answers?

n = 11p = 0.7k = 3
P =
17.Descriptive statisticsMedium
152025303540455055

Find the sample standard deviation s of the data: 14, 58, 32, 55, 18, 33, 37.

n = 7
s =
18.Descriptive statisticsHard
z −2−1012

Exam scores are normally distributed with mean 60 and standard deviation 15. Find the z-score z of a score of 45.

μ = 60σ = 15x = 45
z =
19.Normal distributionMedium
105 s108.2 sX + Y?

X is normal with mean 60 s and standard deviation 5 s; Y is independent and normal with mean 45 s and standard deviation 4 s. Find the probability P that X + Y is more than 108.2 s. Round z to two decimals.

μX = 60, σX = 5μY = 45, σY = 4X + Y > 108.2 s
P =
20.Normal distributionHard
235240245250255260265gtop 70%

The bag weights are normally distributed with mean 250 g and standard deviation 5 g. Drag the cut-off so the shaded top 70% is to the right of it. Find the cut-off x.

μ = 250 gσ = 5 g70%
x = g

3Solutions

1.Limits

Answer: L = −2

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = −4x/(√(x2 − 4x) + x)

Divide by x

f(x) = −4/(√(1 + (−4)/x) + 1)

Let x → ∞

L = −4/(1 + 1) = −2

Answer

L = −2
2.Limits

Answer: L = 0.2

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

L'Hôpital's rule

L = limx→0 [1/(1 + x)]/[5·cos 5x]

Substitute x = 0

L = 1/5 = 0.2

Answer

L = 0.2
3.Derivatives

Answer: f′(1) = 1

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule for the logarithm

f′(x) = 2x/(x2 + 1)

Substitute

f′(1) = 2/2 = 1

Answer

f′(1) = 1
4.Derivatives

Answer: b = −5

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(1) = −7
f′(x) = −2x → f′(1) = −2

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = −7 − (−2)·1 = −5

Answer

b = −5
5.Integrals

Answer: I = 1.742

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

Choose u and dv

u = x, du = dx; dv = sin x dx, v = −cos x

Antiderivative

∫x sin x dx = −x cos x + ∫cos x dx = −x cos x + sin x

Limits

(−2·cos 2 + sin 2) − (0 + 0) = 1.742

Answer

I = 1.742
6.Integrals

Answer: V = 3.77

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

3x = 3x² → x = 0, x = 1

Washer method

V = π∫₀1 ((3x)² − (3x²)²) dx

Integrate

V = π(9·1³/3 − 9·1⁵/5) = π·1.2 = 3.77

Answer

V = 3.77
7.Complex numbers

Answer: Re(w) = 0.3824

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus and argument of w

|w| = 2 / 3 = 0.6667
θ = 30° − (−25)° = 55°

Rectangular form

Re(w) = 0.6667·cos(55°) = 0.3824
Im(w) = 0.6667·sin(55°) = 0.5461
Re(w) = 0.3824

Answer

Re(w) = 0.3824
8.Complex numbers

Answer: Re(z₁) = −3

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Modulus of the roots

271/3 = 3

Argument of the root

θ₁ = (180° + 360°·1)/3 = 180°

Rectangular form

z₁ = 3·(cos 180° + j sin 180°) = −3
Re(z₁) = −3

Answer

Re(z₁) = −3

The 3 roots lie on the circle of radius 3, 120° apart.

9.Differential equations

Answer: t = 12.21 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Cooling constant

k = ln(397/91)/49 = 0.03006 min⁻¹

Time to reach the target

t = ln(397/275)/0.03006 = 12.21 min

Answer

t = 12.21 min
10.Differential equations

Answer: y(1.5) = 4.434

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e0.5t
(e0.5ty)′ = 7e−0.5t

General solution

y = 7/(−0.5)·e−t + C·e−0.5t = −14·e−t + C·e−0.5t

Initial condition

2 = −14 + C → C = 16

Evaluate

y(1.5) = −14·0.2231 + 16·0.4724 = 4.434

Answer

y(1.5) = 4.434
11.Matrices & determinants

Answer: det A = −78

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

2×2 minors of the first row

M₁₁ = −22, M₁₂ = 12, M₁₃ = 16

Cofactor expansion

det A = 3·(−22) − 5·12 + 3·16 = −78

Answer

det A = −78
12.Matrices & determinants

Answer: x = −2.727

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = 2·(−2) − 5·(−3) = 11

Replace the x column

det Aₓ = (−5)·(−2) − 5·8 = −30
x = −30/11 = −2.727

Answer

x = −2.727
y = 0.09091
13.Vectors: dot & cross product

Answer: k = 2

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Dot product equals zero

a·b = 2·k + (−2)·(−4) + (−6)·2 = 0
−4 + 2·k = 0

Solve for k

k = −(−4)/2 = 2

Answer

k = 2
14.Vectors: dot & cross product

Answer: (a × b)x = 9

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product, component by component

(a × b)x = aybz − azby = 5·3 − (−3)·(−2) = 9
(a × b)y = azbx − axbz = (−3)·4 − 3·3 = −21
(a × b)z = axby − aybx = 3·(−2) − 5·4 = −26

Requested component

(a × b)x = 9

Answer

(a × b)x = 9

Check: a × b is perpendicular to both vectors, so its dot product with a and with b is zero.

15.Probability

Answer: Var(X) = 4.44

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 0·0.3 + 2·0.25 + 4·0.3 + 6·0.15 = 2.6

Mean of the squares

E(X²) = 0·0.3 + 4·0.25 + 16·0.3 + 36·0.15 = 11.2

Variance

Var(X) = 11.2 − 2.6² = 4.44

Answer

Var(X) = 4.44
16.Probability

Answer: P = 0.003713

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Binomial formula

P(X = 3) = 165·0.73·0.38 = 165·0.343·6.561 × 10⁻⁵ = 0.003713

Answer

P = 0.003713
17.Descriptive statistics

Answer: s = 16.71

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 247/7 = 35.29

Squared deviations

Σ(x − x̄)² = (−21.29)² + 22.71² + (−3.286)² + 19.71² + (−17.29)² + (−2.286)² + 1.714² = 1675

Standard deviation

s = √(1675/6) = 16.71

Answer

s = 16.71
18.Descriptive statistics

Answer: z = −1

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = (45 − 60)/15 = −1

Answer

z = −1
19.Normal distribution

Answer: P = 0.3085

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the sum

μ = 105 s, σ = √(5² + 4²) = 6.403 s

Standardise

z = (108.2 − 105)/6.403 = 0.5

Upper tail

P = 1 − Φ(0.5) = 1 − 0.6915 = 0.3085

Answer

P = 0.3085
20.Normal distribution

Answer: x = 247.4 g

From an area back to z: Φ(z) is the area to the left of z. For a left-tail area A, find z with Φ(z) = A in the table. A right-tail area A means Φ(z) = 1 − A. A central area A between −z and z leaves (1 − A)/2 in each tail, so Φ(z) = (1 + A)/2. For a value x, use x = μ + zσ.

Area to the left

Φ(z) = 0.3

z from the table

z ≈ −0.52

Back to the original units

x = 250 − 0.52·5 = 247.4 g

Answer

x = 247.4 g

ExamProblems · examproblems.com/courses/engineering-mathematics