Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(4x2 + 2x) − 2x).

f(x) = √(4x2 + 2x) − 2xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (e3x − 1 − 3x)/x².

f(x) = (e3x − 1 − 3x)/x²x → 0
L =
3.DerivativesMedium
xyx = 2

Let f(x) = x2·e0.5x. Find f′(2).

f(x) = x2·e0.5xx = 2
f′(2) =
4.DerivativesHard
xyx = −2

The tangent line to f(x) = x2 − x − 4 at x = −2 crosses the y-axis at y = b. Find b.

f(x) = x2 − x − 4x = −2
b =
5.IntegralsMedium
xy02

Evaluate I = ∫02 2x·(x² + 1)3 dx.

f(x) = 2x·(x² + 1)3[0, 2]
I =
6.IntegralsHard
xy2.5y = x²eˣ

Evaluate I = ∫₀2.5 x²·eˣ dx.

∫₀2.5 x²eˣ dx
I =
7.Complex numbersMedium
ReIm55−5−51010−10−10θz

Write z = −7 + j9 in exponential form r·ejθ. Give θ in radians, between −π and π.

z = −7 + j9
θ = rad
8.Complex numbersHard
ReIm11−1−122−2−233−3−3z₁z₂

One root of z³ − 4z² + z + 26 = 0 is z₁ = 3 + j2. The coefficients are real. Find the real root r.

z₁ = 3 + j2
r =
9.Differential equationsMedium
t (min)T (°C)21Ta​23 °C

A can of soda at 4 °C is taken out of the fridge into a room at 27 °C. After 21 min its temperature is 23 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). Find the constant k in min⁻¹.

T0 = 4 °CTa = 27 °CT(21) = 23 °C
k = min⁻¹
10.Differential equationsHard
ty1.5y(1.5) = ?

Solve y′ + 0.5y = 10e−2t with y(0) = 0. Find y(1.5).

y′ + 0.5y = 10e−2ty(0) = 0
y(1.5) =
11.Matrices & determinantsMedium
A =16−1−6B =4−303

Let C = AB for the matrices shown. Find the entry c22 (row 2, column 2).

A = [1 6; −1 −6]B = [4 −3; 0 3]
c22 =
12.Matrices & determinantsHard
A =−2−1−41

Find the larger eigenvalue λ of the matrix A shown.

A = [−2 −1; −4 1]
λ =
13.Vectors: dot & cross productMedium
xyzdFAB

A constant force F = (−30, 15, −5) N acts on an object while it moves in a straight line from point A(−2, −1, −3) to point B(3, 1, 3). Coordinates are in metres. Find the work W done by the force.

F = (−30, 15, −5) NA(−2, −1, −3) mB(3, 1, 3) m
W = J
14.Vectors: dot & cross productHard
xyzab

For a = (−3, 3, −2) and b = (5, −2, −6), find the x-component (a × b)x of the cross product a × b.

a = (−3, 3, −2)b = (5, −2, −6)
(a × b)x =
15.ProbabilityMedium
xp(x)100.35200.35300.1400.2μ = 21.5

For the distribution shown, find the standard deviation σ of X.

x: 10, 20, 30, 40p(x): 0.35, 0.35, 0.1, 0.2
σ =
16.ProbabilityHard
xp(x)00.2510.3520.130.3μ

X has the distribution shown, and Y = −2X − 3. Find the standard deviation σY of Y.

x: 0, 1, 2, 3p(x): 0.25, 0.35, 0.1, 0.3Y = −2X − 3
σY =
17.Descriptive statisticsMedium
1015202530354045

Find the sample standard deviation s of the data: 45, 49, 10, 37, 19, 25, 12.

n = 7
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 100 and standard deviation 15. What proportion P of values is above 82?

μ = 100σ = 15x = 82
P =
19.Normal distributionMedium
452582P = ?

The battery lifetimes are normally distributed with mean 500 h and standard deviation 40 h. What fraction lies between 452 and 582 h? Give P as a decimal.

μ = 500σ = 40x1 = 452x2 = 582
P =
20.Normal distributionHard
0.04 mm0D − d?

Hole diameters D are normal with mean 25.04 mm and standard deviation 0.02 mm. Shaft diameters d are independent and normal with mean 25 mm and standard deviation 0.015 mm. A randomly chosen shaft fits when D − d > 0. Find the probability P that it fits. Round z to two decimals.

hole: μ = 25.04 mm, σ = 0.02 mmshaft: μ = 25 mm, σ = 0.015 mm
P =

3Solutions

1.Limits

Answer: L = 0.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = 2x/(√(4x2 + 2x) + 2x)

Divide by x

f(x) = 2/(√(4 + 2/x) + 2)

Let x → ∞

L = 2/(2 + 2) = 0.5

Answer

L = 0.5
2.Limits

Answer: L = 4.5

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

(3·e3x − 3)/(2x) → 0/0

Second application

9·e3x/2

Substitute x = 0

L = 9·1/2 = 4.5

Answer

L = 4.5
3.Derivatives

Answer: f′(2) = 16.31

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Product rule

f′(x) = u′v + uv′ = e0.5x·(2x + 0.5·x2)

Substitute

f′(2) = 2.718·(4 + 2) = 16.31

Answer

f′(2) = 16.31
4.Derivatives

Answer: b = −8

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Point and slope

f(−2) = 2
f′(x) = 2x − 1 → f′(−2) = −5

Tangent line at x = 0

b = f(x₀) − f′(x₀)·x₀ = 2 − (−5)·(−2) = −8

Answer

b = −8
5.Integrals

Answer: I = 156

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Substitution

u = x² + 1, du = 2x dx
I = ∫15 u3 du

Integrate and evaluate

I = [u4/4]15 = (625 − 1)/4 = 156

Answer

I = 156
6.Integrals

Answer: I = 37.59

Integration by parts: ∫u·dv = u·v − ∫v·du, from the product rule. Choose u as the factor that gets simpler when you differentiate it (a power of x, or ln x), and dv as the factor you can integrate (eˣ, sin x, cos x, or x when u = ln x). For a definite integral, evaluate u·v at both limits: ∫ₐᵇ u dv = [u·v]ₐᵇ − ∫ₐᵇ v du. A factor x² needs two rounds.

First round

∫x²eˣ dx = x²eˣ − ∫2x eˣ dx

Second round

∫2x eˣ dx = 2x eˣ − 2eˣ
∫x²eˣ dx = eˣ(x² − 2x + 2)

Limits

12.18·(3.25) − 1·2 = 37.59

Answer

I = 37.59
7.Complex numbers

Answer: θ = 2.232 rad

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Modulus

r = √(49 + 81) = 11.4

Argument in radians

θ = 127.9° = 127.9·π/180 = 2.232 rad

Exponential form

z = 11.4·ej2.232

Answer

θ = 2.232 rad
8.Complex numbers

Answer: r = −2

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Conjugate pair

z₂ = 3 − j2
(z − z₁)(z − z₂) = z² − 2·3·z + (3² + 2²) = z² − 6z + 13

Factor out the quadratic

z³ − 4z² + z + 26 = (z² − 6z + 13)(z + 2)

Real root

r = −2

Answer

r = −2

Check with the sum of the roots: z₁ + z₂ + r = 6 + (−2) = 4 = −(−4).

9.Differential equations

Answer: k = 0.0833 min⁻¹

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Ratio of temperature differences

e−21k = -4/-23

Solve for k

k = ln(-23/-4)/21 = 0.0833 min⁻¹

Answer

k = 0.0833 min⁻¹
10.Differential equations

Answer: y(1.5) = 2.817

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Integrating factor

μ = e0.5t
(e0.5ty)′ = 10e−1.5t

General solution

y = 10/(−1.5)·e−2t + C·e−0.5t = −6.667·e−2t + C·e−0.5t

Initial condition

0 = −6.667 + C → C = 6.667

Evaluate

y(1.5) = −6.667·0.04979 + 6.667·0.4724 = 2.817

Answer

y(1.5) = 2.817
11.Matrices & determinants

Answer: c22 = −15

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c22 = (−1)·(−3) + (−6)·3 = −15

Answer

c22 = −15
12.Matrices & determinants

Answer: λ = 2

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Characteristic equation

λ² − (−1)λ + (−6) = 0

Solve

λ = (−1 ± √(25))/2 → λ = −3, 2
λ = 2

Answer

λ = 2
13.Vectors: dot & cross product

Answer: W = −150 J

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Displacement

d = B − A = (3, 1, 3) − (−2, −1, −3) = (5, 2, 6) m

Work

W = F·d = (−30)·5 + 15·2 + (−5)·6 = −150 J

Answer

W = −150 J

Negative work: the force acts mostly against the motion.

14.Vectors: dot & cross product

Answer: (a × b)x = −22

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product, component by component

(a × b)x = aybz − azby = 3·(−6) − (−2)·(−2) = −22
(a × b)y = azbx − axbz = (−2)·5 − (−3)·(−6) = −28
(a × b)z = axby − aybx = (−3)·(−2) − 3·5 = −9

Requested component

(a × b)x = −22

Answer

(a × b)x = −22

Check: a × b is perpendicular to both vectors, so its dot product with a and with b is zero.

15.Probability

Answer: σ = 11.08

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Mean

μ = 10·0.35 + 20·0.35 + 30·0.1 + 40·0.2 = 21.5

Mean of the squares

E(X²) = 100·0.35 + 400·0.35 + 900·0.1 + 1600·0.2 = 585

Variance

Var(X) = 585 − 21.5² = 122.8
σ = √122.8 = 11.08

Answer

σ = 11.08
16.Probability

Answer: σY = 2.322

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Spread of X

μ = 1.45, Var(X) = 1.347, σX = 1.161

Linear change

σY = |−2|·1.161 = 2.322

Answer

σY = 2.322

The mean does move: E(Y) = −2·1.45 − 3 = −5.9.

17.Descriptive statistics

Answer: s = 15.71

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 197/7 = 28.14

Squared deviations

Σ(x − x̄)² = 16.86² + 20.86² + (−18.14)² + 8.857² + (−9.143)² + (−3.143)² + (−16.14)² = 1481

Standard deviation

s = √(1481/6) = 15.71

Answer

s = 15.71
18.Descriptive statistics

Answer: P = 0.8849

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = −1.2

Standard normal table

Φ(−1.2) = 0.1151
P = 1 − 0.1151 = 0.8849

Answer

P = 0.8849
19.Normal distribution

Answer: P = 0.8647

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (452 − 500)/40 = −1.2
z₂ = (582 − 500)/40 = 2.05

Area between

P = Φ(2.05) − Φ(−1.2) = 0.9798 − 0.1151 = 0.8647

Answer

P = 0.8647
20.Normal distribution

Answer: P = 0.9452

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the difference

μ = 25.04 − 25 = 0.04 mm, σ = 0.025 mm

Standardise

z = (0 − 0.04)/0.025 = −1.6

Probability

P = 1 − Φ(−1.6) = 0.9452

Answer

P = 0.9452

ExamProblems · examproblems.com/courses/engineering-mathematics