Engineering Mathematics: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Limits

Direct substitution
try x = a first; 0/0 means simplify
Factor and cancel
xⁿ − aⁿ = (x − a)(xⁿ⁻¹ + a·xⁿ⁻² + … + aⁿ⁻¹)
Conjugate
(√x − √a)(√x + √a) = x − a
Limits at infinity
divide by the highest power of x; equal degrees give the ratio of leading coefficients
Special limit
limx→∞ (1 + a/x)bx = eab
L'Hôpital's rule
lim f/g = lim f′/g′ (0/0 or ∞/∞)

Derivatives

Power rule
(xⁿ)′ = n·xⁿ⁻¹
Product rule
(uv)′ = u′v + uv′
Quotient rule
(u/v)′ = (u′v − uv′)/v²
Chain rule
f(g(x))′ = f′(g(x))·g′(x)
Common derivatives
(eˣ)′ = eˣ, (ln x)′ = 1/x, (sin x)′ = cos x, (cos x)′ = −sin x

Method

  1. Identify the structure: sum, product, quotient or composition.
  2. Apply the power rule to each power of x.
  3. Use the product, quotient or chain rule where needed.
  4. Simplify, and evaluate at the point if asked.

Integrals

Power rule
∫xⁿ dx = xⁿ⁺¹/(n + 1) + C
Definite integral
∫ab f dx = F(b) − F(a)
Common integrals
∫eˣ dx = eˣ, ∫1/x dx = ln|x|, ∫sin x dx = −cos x
Area between curves
∫ab (f − g) dx

Method

  1. Rewrite the integrand as a sum of simple terms where possible.
  2. Apply the power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1), and standard integrals for ex, 1/x, sin and cos.
  3. Use substitution when you see a function and its derivative together.
  4. For a definite integral, evaluate F(b) − F(a).

Complex numbers

Rectangular form
z = a + jb, j² = −1, z̄ = a − jb
Modulus and argument
|z| = √(a² + b²), tan θ = b/a (check the quadrant)
Polar and exponential form
z = r∠θ = r(cos θ + j sin θ) = r·ejθ
Division
z₁/z₂ = z₁z̄₂/|z₂|²
Product and quotient
r₁∠θ₁ · r₂∠θ₂ = r₁r₂∠(θ₁ + θ₂), r₁∠θ₁ / r₂∠θ₂ = (r₁/r₂)∠(θ₁ − θ₂)
De Moivre
(r∠θ)ⁿ = rⁿ∠nθ
n-th roots
zk = R1/n∠((φ + 360°·k)/n), k = 0 … n − 1
Quadratic with p² < 4q
z = −p/2 ± j√(q − p²/4)

Method

  1. Decide which form suits the operation: rectangular a + jb for adding and subtracting, polar r∠θ for multiplying, dividing, powers and roots.
  2. Multiply out with j² = −1; divide by multiplying the top and bottom by the conjugate of the denominator.
  3. Convert with r = √(a² + b²) and θ from a sketch of the point (check the quadrant), and back with a = r cos θ, b = r sin θ.
  4. For powers use De Moivre, (r∠θ)ⁿ = rⁿ∠nθ; for zⁿ = R∠φ list all n roots R1/n∠((φ + 360°k)/n).

Differential equations

Exponential growth/decay
dy/dt = ky → y = y0ekt
Half-life
k = ln 2 / t½
Newton's law of cooling
T(t) = Ta + (T0 − Ta)e−kt
Integrating factor
y′ + p(x)y = q(x): μ = e∫p dx, (μy)′ = μq
Mixing tank
dm/dt = r·c − (r/V)·m

Matrices & determinants

2×2 determinant
det = ad − bc
2×2 inverse
A⁻¹ = (1/det)·[d −b; −c a]
Product
(AB)ij = Σk AikBkj
Eigenvalues
det(A − λI) = 0
Cramer’s rule
xi = det(Ai)/det(A)

Vectors: dot & cross product

Magnitude
|a| = √(ax² + ay² + az²)
Unit vector
û = a/|a|
Components from an angle
Fx = F·cos θ, Fy = F·sin θ
Dot product
a·b = axbx + ayby + azbz = |a||b|cos θ
Scalar projection of a onto b
a·b/|b|
Work
W = F·d
Cross product
a × b = (aybz − azby, azbx − axbz, axby − aybx)
Areas
parallelogram |a × b|, triangle ½|a × b|
Moment about O
MO = r × F, r = A − O
Volume of a parallelepiped
V = |a·(b × c)|

Method

  1. Write every vector in components; for a force given by a magnitude and an angle, use F·cos θ and F·sin θ.
  2. For lengths and directions use the magnitude √(x² + y² + z²) and the unit vector a/|a|.
  3. Use the dot product for angles, projections, perpendicularity and work: a·b = |a||b|cos θ.
  4. Use the cross product for perpendicular vectors, areas and moments: write the three components carefully, keeping the order a × b.

Probability

Complement
P(not A) = 1 − P(A)
Addition rule
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
Independent events
P(A ∩ B) = P(A)·P(B)
Conditional probability
P(A|B) = P(A ∩ B)/P(B)
Binomial
P(X = k) = C(n,k)·pk(1 − p)n−k

Descriptive statistics

Mean
x̄ = Σx/n
Sample standard deviation
s = √(Σ(x − x̄)²/(n − 1))
Median
middle value of the sorted data
z-score
z = (x − μ)/σ
Normal distribution
68% within ±1σ, 95% within ±2σ

Normal distribution

z-score
z = (x − μ)/σ
Below x
P(X < x) = Φ(z)
Above x
P(X > x) = 1 − Φ(z)
Between
Φ(z2) − Φ(z1)
Percentile
x = μ + z·σ

Method

  1. Convert the value to a z-score: z = (x − μ)/σ.
  2. Look up Φ(z), the area to the left of z.
  3. For the area to the right use 1 − Φ(z); for an interval subtract the two left areas.
  4. For a percentile, work backwards: find z for the area, then x = μ + z·σ.

2Practice problems

1.LimitsMedium
xyy = L

Find the limit L = limx→∞ (√(4x2 − 7x) − 2x).

f(x) = √(4x2 − 7x) − 2xx → ∞
L =
2.LimitsHard
xyx = 0

Find the limit L = limx→0 (e1.5x − 1 − 1.5x)/x².

f(x) = (e1.5x − 1 − 1.5x)/x²x → 0
L =
3.DerivativesMedium
xyx = 2

Let f(x) = ln(3x2 + 2). Find f′(2).

f(x) = ln(3x2 + 2)x = 2
f′(2) =
4.DerivativesHard
xy

Let f(x) = x3 − 4.5x2 + 4. Find the x-coordinate x of the local minimum.

f(x) = x3 − 4.5x2 + 4
x =
5.IntegralsMedium
xy02

Evaluate I = ∫02 2x·(x² + 1)2 dx.

f(x) = 2x·(x² + 1)2[0, 2]
I =
6.IntegralsHard
xy4y = 4xy = x²

The region between the line y = 4x and the parabola y = x² is rotated about the x-axis. Find the volume V of the solid.

y = 4xy = x²
V =
7.Complex numbersMedium
ReIm22−2−244−4−4θz

Write z = 6∠140° in rectangular form a + jb and give the real part a.

r = 6θ = 140°
a =
8.Complex numbersHard
ReIm11−1−122−2−233−3−3θz

Find the imaginary part of (−3 − j2)³.

z = −3 − j2n = 3
Im(z³) =
9.Differential equationsMedium
t (min)T (°C)21Ta​336 °C194 °C

A forged steel part at 500 °C is left to cool in a workshop at 21 °C. After 21 min its temperature is 336 °C. It follows Newton's law of cooling, dT/dt = −k·(T − Tₐ). How long after the start, t, does it take to reach 194 °C?

T0 = 500 °CTa = 21 °CT(21) = 336 °CT = 194 °C
t = min
10.Differential equationsHard
tyy(0) = 1y(0.75) = ?

Solve y″ + y′ + 25.25y = 0 with y(0) = 1 and y′(0) = 0 (released from rest). Find y(0.75); angles in radians.

y″ + y′ + 25.25y = 0y(0) = 1y′(0) = 0
y(0.75) =
11.Matrices & determinantsMedium
A =−5−446B =1−66−4

Let C = AB for the matrices shown. Find the entry c11 (row 1, column 1).

A = [−5 −4; 4 6]B = [1 −6; 6 −4]
c11 =
12.Matrices & determinantsHard
A =153−2b =−57

Solve the system x + 5y = −5 and 3x − 2y = 7. Find x.

x + 5y = −53x − 2y = 7
x =
13.Vectors: dot & cross productMedium
xyzab

Find the dot product a·b of a = (1, −4, −5) and b = (3, −3, 5).

a = (1, −4, −5)b = (3, −3, 5)
a·b =
14.Vectors: dot & cross productHard
xyzab

The unit vector n̂ is perpendicular to both a = (3, 3, 5) and b = (−2, 4, 1) and has a positive z-component. Find its y-component n̂y.

a = (3, 3, 5)b = (−2, 4, 1)n̂z > 0
n̂y =
15.ProbabilityMedium
P(at least one six) = ??1?2?3?4?5?6?7P(six) = 1/6 on each roll

A fair die is rolled 7 times. What is the probability P of getting at least one six?

n = 7
P =
16.ProbabilityHard
xp(x)10.2520.230.140.350.15μ

X has the distribution shown, and Y = −2X + 20. Find the standard deviation σY of Y.

x: 1, 2, 3, 4, 5p(x): 0.25, 0.2, 0.1, 0.3, 0.15Y = −2X + 20
σY =
17.Descriptive statisticsMedium
2025303540455055

Find the sample standard deviation s of the data: 56, 23, 37, 20, 57.

n = 5
s =
18.Descriptive statisticsHard
z −2−1012

A quantity is normally distributed with mean 100 and standard deviation 12. What proportion P of values is above 107.2?

μ = 100σ = 12x = 107.2
P =
19.Normal distributionMedium
480562P = ?

The battery lifetimes are normally distributed with mean 500 h and standard deviation 40 h. What fraction lies between 480 and 562 h? Give P as a decimal.

μ = 500σ = 40x1 = 480x2 = 562
P =
20.Normal distributionHard
10 g0X − Y?

The mass X of a product from line 1 and Y from line 2 are independent and normal: X has mean 500 g and standard deviation 8 g, Y has mean 490 g and standard deviation 6 g. Find the probability P that X is greater than Y. Round z to two decimals.

μX = 500 g, σX = 8 gμY = 490 g, σY = 6 g
P =

3Solutions

1.Limits

Answer: L = −1.75

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

Multiply by the conjugate

f(x) = −7x/(√(4x2 − 7x) + 2x)

Divide by x

f(x) = −7/(√(4 + (−7)/x) + 2)

Let x → ∞

L = −7/(2 + 2) = −1.75

Answer

L = −1.75
2.Limits

Answer: L = 1.125

Limits: first try direct substitution. If it gives 0/0, simplify first: factor and cancel the common factor, or multiply by the conjugate. As x → ∞, divide numerator and denominator by the highest power of x. L'Hôpital's rule: if f/g gives 0/0 or ∞/∞, then lim f/g = lim f′/g′, differentiating the numerator and the denominator separately (not with the quotient rule).

First application

(1.5·e1.5x − 1.5)/(2x) → 0/0

Second application

2.25·e1.5x/2

Substitute x = 0

L = 2.25·1/2 = 1.125

Answer

L = 1.125
3.Derivatives

Answer: f′(2) = 0.8571

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Chain rule for the logarithm

f′(x) = 6x/(3x2 + 2)

Substitute

f′(2) = 12/14 = 0.8571

Answer

f′(2) = 0.8571
4.Derivatives

Answer: x = 3

Differentiation: the derivative f′(x) is the slope of the graph at x. Power rule: (xⁿ)′ = n·xⁿ⁻¹. Product rule: (uv)′ = u′v + uv′. Chain rule: (f(g(x)))′ = f′(g(x))·g′(x). Where f′(x) = 0 the graph has a horizontal tangent: a maximum, minimum or saddle point.

Derivative

f′(x) = 3x2 − 9x = 3·(x2 − 3x)

Solve f′(x) = 0

x = 0 or x = 3

Which one is which

f″(x) = 6x − 9: negative at a maximum, positive at a minimum.

f″(0) = −9, f″(3) = 9
x = 3

Answer

x = 3
5.Integrals

Answer: I = 41.33

Definite integrals: ∫ₐᵇ f(x) dx is the signed area between the graph and the x-axis from a to b. Find an antiderivative F (with F′ = f) and evaluate F(b) − F(a). Power rule: ∫xⁿ dx = xⁿ⁺¹/(n + 1). The area between two curves is ∫(upper − lower) dx.

Substitution

u = x² + 1, du = 2x dx
I = ∫15 u2 du

Integrate and evaluate

I = [u3/3]15 = (125 − 1)/3 = 41.33

Answer

I = 41.33
6.Integrals

Answer: V = 428.9

Volumes of revolution: rotating the region under y = f(x) from x = a to x = b about the x-axis makes a solid whose cross-section at x is a disc of radius f(x). Adding the discs gives V = π∫ₐᵇ f(x)² dx. When the region lies between an outer curve R(x) and an inner curve r(x), each slice is a washer: V = π∫ₐᵇ (R(x)² − r(x)²) dx. Square the radii before you subtract them.

Intersection points

4x = 1x² → x = 0, x = 4

Washer method

V = π∫₀4 ((4x)² − (1x²)²) dx

Integrate

V = π(16·4³/3 − 1·4⁵/5) = π·136.5 = 428.9

Answer

V = 428.9
7.Complex numbers

Answer: a = −4.596

Polar form: z = r∠θ = r(cos θ + j sin θ) = r·ejθ, with r = |z| and θ = arg z. Back to rectangular form: a = r cos θ, b = r sin θ. The argument needs the quadrant: θ = atan(b/a) only when a > 0; for a < 0 add or subtract 180°. In polar form multiplication is easy: multiply the moduli and add the arguments; for division divide the moduli and subtract the arguments.

Components

a = 6·cos(140°) = −4.596
b = 6·sin(140°) = 3.857

Rectangular form

z = −4.596 + j3.857
a = −4.596

Answer

a = −4.596
8.Complex numbers

Answer: Im(z³) = −46

De Moivre and roots: (r∠θ)ⁿ = rⁿ∠nθ. The equation zⁿ = R∠φ has exactly n roots, all with modulus R1/n, at the arguments (φ + 360°·k)/n for k = 0, 1, …, n − 1: they lie evenly spaced on a circle, 360°/n apart. A quadratic z² + pz + q = 0 with p² < 4q has the complex roots z = −p/2 ± j√(q − p²/4); a polynomial with real coefficients always has its complex roots in conjugate pairs a ± jb.

Powers step by step

z² = (−3 − j2)(−3 − j2) = 5 + j12
z³ = (5 + j12)(−3 − j2) = 9 − j46

Check with De Moivre

z = 3.606∠−146.3° → z³ = 46.87∠−78.93°
Im(z³) = −46

Answer

Im(z³) = −46
9.Differential equations

Answer: t = 51.03 min

First-order differential equations: dy/dt = k·y has the solution y = y₀·ekt (growth for k > 0, decay for k < 0); a half-life T gives k = ln 2/T. Newton's law of cooling, dT/dt = −k·(T − Tₐ), gives T(t) = Tₐ + (T₀ − Tₐ)·e−kt. A linear equation y′ + p(x)·y = q(x) is solved with the integrating factor μ = e∫p dx: (μy)′ = μq, so μy = ∫μq dx + C.

Cooling constant

k = ln(479/315)/21 = 0.01996 min⁻¹

Time to reach the target

t = ln(479/173)/0.01996 = 51.03 min

Answer

t = 51.03 min
10.Differential equations

Answer: y(0.75) = −0.6032

Second-order linear equations: for y″ + b·y′ + c·y = 0 try y = ert: this gives the characteristic equation r² + b·r + c = 0. Two real roots r₁ ≠ r₂ give y = A·er₁t + B·er₂t (overdamped); a double root r gives y = (A + Bt)·ert (critically damped); complex roots −α ± jω give y = e−αt(A cos ωt + B sin ωt) (underdamped, oscillating). The initial values y(0) and y′(0) fix A and B. Written as y″ + 2ζωny′ + ωn²y = 0, ωn is the natural frequency and ζ the damping ratio: ζ < 1 oscillates. With a constant input, y″ + by′ + cy = c·K, the solution is the steady value K plus the free response.

Complex roots

r = −0.5 ± 5j

Constants

A = 1, B = 0.5·1/5 = 0.1

Evaluate

y(0.75) = e−0.375(1·cos 3.75 + 0.1·sin 3.75) = −0.6032

Answer

y(0.75) = −0.6032
11.Matrices & determinants

Answer: c11 = −29

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Row times column

c11 = (−5)·1 + (−4)·6 = −29

Answer

c11 = −29
12.Matrices & determinants

Answer: x = 1.471

Matrices: the determinant of a 2×2 matrix is ad − bc. For 3×3, expand along a row: each entry times the determinant of the 2×2 matrix left after removing its row and column, with alternating signs + − +. Eigenvalues λ solve det(A − λI) = 0; for 2×2 that is λ² − (trace)·λ + det = 0.

Determinant of the coefficient matrix

det A = 1·(−2) − 5·3 = −17

Replace the x column

det Aₓ = (−5)·(−2) − 5·7 = −25
x = −25/(−17) = 1.471

Answer

x = 1.471
y = −1.294
13.Vectors: dot & cross product

Answer: a·b = −10

Dot product: a·b = axbx + ayby + azbz = |a|·|b|·cos θ, a scalar. It gives the angle between two vectors, cos θ = a·b/(|a|·|b|), and it is zero when they are perpendicular. The scalar projection of a onto b is a·b/|b|, and a constant force F moving through a displacement d does work W = F·d.

Multiply matching components and add

a·b = 1·3 + (−4)·(−3) + (−5)·5 = 3 + 12 + (−25) = −10

Answer

a·b = −10

Negative: the angle between the vectors is more than 90°.

14.Vectors: dot & cross product

Answer: n̂y = −0.4649

Cross product: a × b = (aybz − azby, azbx − axbz, axby − aybx) is perpendicular to both vectors, and |a × b| = |a|·|b|·sin θ is the area of the parallelogram they span (the triangle has half of it). Order matters: b × a = −(a × b). The moment of a force F applied at point A about point O is MO = r × F, with r = A − O.

Cross product

(a × b)x = aybz − azby = 3·1 − 5·4 = −17
(a × b)y = azbx − axbz = 5·(−2) − 3·1 = −13
(a × b)z = axby − aybx = 3·4 − 3·(−2) = 18

Normalise

The z-component of a × b is already positive.

|a × b| = √((−17)² + (−13)² + 18²) = 27.96
n̂ = (−17, −13, 18)/27.96 = (−0.6079, −0.4649, 0.6437)
n̂y = −0.4649

Answer

n̂y = −0.4649
15.Probability

Answer: P = 0.7209

Probability: with equally likely outcomes, P(A) = favourable/total. For independent events multiply: P(A and B) = P(A)·P(B). The complement often helps: P(at least one) = 1 − P(none). Binomial: in n independent trials with success probability p, P(X = k) = C(n, k)·pᵏ·(1 − p)ⁿ⁻ᵏ.

Complement

P(no six) = (5/6)7 = 0.2791
P = 1 − 0.2791 = 0.7209

Answer

P = 0.7209
16.Probability

Answer: σY = 2.891

Discrete random variables: a probability distribution lists every value x a variable can take with its probability p(x); the probabilities are between 0 and 1 and add up to 1. The expected value (mean) is E(X) = Σx·p(x), the long-run average. The variance is Var(X) = Σ(x − μ)²·p(x) = E(X²) − μ², and the standard deviation σ = √Var(X). For a linear change Y = aX + b: E(Y) = a·E(X) + b, Var(Y) = a²·Var(X) and σY = |a|·σX; adding a constant does not change the spread.

Spread of X

μ = 2.9, Var(X) = 2.09, σX = 1.446

Linear change

σY = |−2|·1.446 = 2.891

Answer

σY = 2.891

The mean does move: E(Y) = −2·2.9 + 20 = 14.2.

17.Descriptive statistics

Answer: s = 17.56

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Mean

x̄ = 193/5 = 38.6

Squared deviations

Σ(x − x̄)² = 17.4² + (−15.6)² + (−1.6)² + (−18.6)² + 18.4² = 1233

Standard deviation

s = √(1233/4) = 17.56

Answer

s = 17.56
18.Descriptive statistics

Answer: P = 0.2743

Descriptive statistics: the mean is the sum divided by n; the median is the middle value of the sorted data (the average of the two middle values when n is even). The sample standard deviation is s = √(Σ(x − x̄)²/(n − 1)). A z-score z = (x − μ)/σ says how many standard deviations a value lies from the mean.

Standardise

z = 0.6

Standard normal table

Φ(0.6) = 0.7257
P = 1 − 0.7257 = 0.2743

Answer

P = 0.2743
19.Normal distribution

Answer: P = 0.6309

Normal distribution: convert a value x to a z-score, z = (x − μ)/σ, which counts standard deviations from the mean. A z-table (or Φ(z)) gives the area to the left of z, which is P(X < x). The area to the right is 1 − Φ(z), and the area between two values is the difference of their two areas.

z-scores

z₁ = (480 − 500)/40 = −0.5
z₂ = (562 − 500)/40 = 1.55

Area between

P = Φ(1.55) − Φ(−0.5) = 0.9394 − 0.3085 = 0.6309

Answer

P = 0.6309
20.Normal distribution

Answer: P = 0.8413

Sums and differences of normal variables: if X and Y are independent and normal, X + Y and X − Y are normal too. Means add or subtract: E(X ± Y) = μX ± μY. Variances always add, also for a difference: Var(X ± Y) = σX² + σY², so σ = √(σX² + σY²). Standard deviations never add directly. The total of n independent items with the same distribution has mean n·μ and standard deviation σ·√n. Then standardise as usual: z = (x − mean)/σ and read Φ(z).

Distribution of the difference

μ = 500 − 490 = 10 g, σ = 10 g

Standardise

z = (0 − 10)/10 = −1

Probability

P = 1 − Φ(−1) = 0.8413

Answer

P = 0.8413

ExamProblems · examproblems.com/courses/engineering-mathematics